Applied Physics A 49, no. 2 (1989)

Applied Physics A 49, no. 2 (1989)     

TIME-AVERAGED SPONTANEOUS POWER RADIATION IN PLASMA FOCUS

The time-averaged spontaneous radiation power and its spectrum are derived analytically. The collective mode is taken to be electron-cyclotron mode driven by the relativistic electron beam existing in the unstable and late phases of plasma focus. The infrared range radiation calculated is in agreement with experimental observation.     

在乳液体系里制备过氧化氫基聚苯乙烯及其在接枝聚合上的应用

用不同分子量的聚苯乙烯在乳液体系中进行过氧化氢基化反应,然后测定这些产品的特性粘数,HPO值(每1,000个苯乙烯结构单元中所合的过氧化氢基平均数目)等。在过氧化氢基聚苯乙烯的红外光谱里,可以在3,200—3,600厘米~(-1)吸收区里观察到过氧化氢基的吸收带,其吸收强度随着HPO值的增大而加强。最后用这些大分子过氧化物引发甲基丙烯酸甲酯及苯乙烯聚合,得到接枝聚合物。经过分离提纯后,用下列的方法: (1)浊度滴定; (2)热机械性能的测试; (3)水解后测定交换量; (4)红外吸收光谱;证明它们是接枝共聚物。     

A microcomputer-controlled firing circuit for a triac AC voltage controller

A simple microcomputer-based triggering circuit for a triac AC voltage controller is described. The hardware-oriented design makes use of commonly available CMOS digital ICs to convert the digital output from a microcomputer to an equivalent firing delay angle synchronized with the AC mains.     

High-intensity laser-driven particle and electromagnetic wave sources for science, industry, and medicine

We simultaneously observed both the fast proton generation and terahertz (THz) radiation in the laser pulse interaction with a thin-foil target.The maximum proton energy of ～2.3 MeV and an intense THz radiation were observed at the pulse duration of ～30fs.We also measured the proton beam and UV harmonics from a thin-foil target by changing the laser pulse duration.In the case of the ～500 fs, peaks of UV harmonics up to fourth order appeared.This unique combination of the multiple beams will provide useful applications such as pump-probe experiments.     

利用CF4等离子体制作高开口率TFT-LCD

为了获得高的开口率,有必要优化设计参数和工艺容差。通常的过孔刻蚀工艺采用SF6基气体进行刻蚀,但是这种方法在金属和钝化层之间的选择性太小,因此,必须增加过孔的尺寸才行。为了克服上述问题,在本研究中用CF4气体代替SF6气体进行刻蚀,结果在FFS 5 .16(2 .03 in)像素结构中,开口率提高了60 %。     

获得精细通孔图形的光刻技术改进

为了获得更高性能的TFT-LCD面板,在光刻时保证精细的图形成像十分重要,其中,如何制作出尺寸更小的通孔图形是主要的问题之一。本文提供的研究中,我们只简单地改变了一下烘烤工艺,而不需要改变Eop和显影时间,就可以将通孔图形的尺寸减小20 %~25 %。在后续的刻蚀工艺中,通孔的尺寸能显著减小。     

二茂铁衍生物电子传递剂键合的溶胶-凝胶葡萄糖生物传感器

The sol-gel derived glucose biosensor was developed, and the sol-gel membrane was organically modified by N-（3-triethoxysilylpropyl）-ferrocenylmethylamine （FcSi） as sol-gel precursor to make electrochemical biosensor. The structure of biosensor was sol-gel/FcSi＋GOx/GC type （glucose oxidase, GOx）. The ferrocene mediator was chemically immobilized to the silane network, and GOx was entrapped to the sol-gel glass network. Therefore, these structures prevented mediator leakage and retained the enzyme activity. Additionally, pH of electrolyte, temperature effects, and interference of positive substances with biosensor were investigated. And the electrochemical performance of biosensor was studied by amperometry. The results indicated that the linear range, detection limit. and response slope of biosensor was 2.00×10^-4-1.57×10^-3 mol·L^-1, 2.0×10^-4 mol·L^-1 and 5.06×10^5 nA·mol^- 1·L, respectively.     

NUMERICAL STUDIES OF TRANSITIONAL TURBULENT PULSATILE FLOW IN PIPES WITH RING–TYPE CONSTRICTIONS

Pulsatile flows in the vicinity of mechanical ring-type constrictions in pipes were studied for transitional turbulent flow with a Reynolds number (Re) of the order of 10⁴. The Womersley number (Nw) is in the range 30–50, with a corresponding Strouhal number (St) range of 0·0143–0·0398. The pulsatile flows considered are a pure sinusoidal flow, a physiological flow and an experimental pulsatile flow profile for mechanical aortic valve flow simulations. Transitional laminar and turbulent flow characteristics in an alternating manner within the pulsatile flow fields were studied numerically. It was observed that fluid accelerations tend to suppress the development of flow disturbances. All the instantaneous maximum values of turbulent kinetic energy, turbulent viscosity and turbulent shear stress are smaller during the acceleration phase than during the deceleration period. Various parametric equations have been formulated through numerical experimentation to better describe the relationships between the instantaneous flow rate (Q), the pressure loss (ΔP), the maximum velocity (V_max), the maximum vorticity (ζ_max), the maximum wall vorticity (ζ_w,max), the maximum shear stress (τ_max) and the maximum wall shear stress (τ_w,max) for turbulent pulsatile flow in the vicinity of constrictions in the vascular tube. An elliptic relationship has been found to exist between the instantaneous flow rate and the instantaneous pressure gradient. Other linear and quadratic relations between various flow parameters were also obtained.     

FINITE ELEMENT SOLUTIONS OF LAMINAR AND TURBULENT MIXED CONVECTION IN A DRIVEN CAVITY

This paper presents laminar and turbulent mixed convection solutions of a driven cavity flow using the finite element method. For the laminar flow, distributions of velocity and temperature with and without the effect of buoyancy force are presented and compared. For the turbulent flow, governing partial differential equations of the thermal turbulence two-equati on model and kinetic turbulence two-equation model are used. Corresponding results such as kinetic eddy diffusivity, kinetic eddy energy, thermal eddy energy and their dissipations are presented.