Patterning Surfaces for Controlled Platelet Adhesion and Detection of Dysfunctional Platelets

Platelets play a fundamental role in thrombus formation and in the pathogenesis of arterial thrombosis. Patterning surfaces for controlled platelet adhesion paves the way for adhesion and activation mechanisms in platelets and detection of platelet functional defects. Here, a new and simple method based on controlled polymerization of 2‐methacryloyloxyethyl phosphorylcholine (MPC) on the surface of styrene‐block‐(ethylene‐co‐butylene)‐block‐styrene (SEBS) is shown. The competition between polymerization and degradation enables platelet adhesion on SEBS to be switched on and off. The adhesive sites of the platelets can be down to single cell level, and the dysfunctional platelets can be quantitatively detected.

     

Quantitative LC–MS/MS method in urine for the detection of drugs used to reverse the effects of chemical castration

The chemical castration law, which targets child molesters with recidivism, was introduced in Korea in 2011. For this, leuprolide, a gonadotropin-releasing hormone agonist, is used to decrease testosterone production and suppress libido. In order to achieve efficient law enforcement, it is necessary to monitor intentional ingestion of drugs that antagonize the effect of leuprolide. Therefore, an analytical method for the simultaneous detection of mirodenafil, sildenafil, tadalafil, udenafil, vardenafil, icariin, alprostadil, and yohimbine, which are the major impotence treatment drugs, legitimately or otherwise, in Korea, as well as their selected metabolites, in human urine was established and validated using liquid chromatography–tandem mass spectrometry (LC–MS/MS). First, different sample preparation methods, two solid-phase extractions with different cartridges and protein precipitation, were compared and protein precipitation was chosen for the entire study because it showed better matrix effects and recoveries. Thus, the drugs and metabolites in urine were extracted by protein precipitation and then filtered and analyzed by LC–MS/MS with polarity switching electrospray ionization. The validation results of selectivity, matrix effect, recovery, linearity, intra- and inter-assay precision and accuracy were satisfactory. The limits of detection ranged from 0.25 to 10 ng/mL, and the limits of quantification were 2.5 to 50 ng/mL. The drugs and metabolites in urine did not show any degradation under storage for 7 and 15 days at 4 and ?20 °C as well as after three freeze–thaw cycles. The developed method will be very useful for monitoring the illegal use of impotence treatment drugs.     

Effects of experimental conditions on the molecular composition of maltenes and asphaltenes derived from oilsands bitumen: Characterized by negative-ion ESI FT-ICR MS

A vacuum topped Canadian oilsands bitumen (VTB) was subjected to solvent precipitation and subsequently characterized by elemental analysis, gel permeation chromatograph (GPC), 1 H-NMR spectroscopy and negative-ion electrospray ionization (ESI) Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Effects of experimental conditions such as solvent types (n-C5 , n-C6 , and n-C7 ), solvent purity, and solvent washing time on asphaltenes yields, bulk composition, and molecular composition of detectable heteroatom compounds in ESI source were determined. Elemental nitrogen and sulfur were enriched in asphaltenes while elemental oxygen had comparable content in maltenes and asphaltenes. Molecular composition of asphaltenes varies with separation conditions. The N1 and O1 species identified by ESI FT-ICR MS were enriched in maltenes. The O2 species exhibited two different double bond equivalents (DBE) distributions and solubility in normal paraffin solvents, indicating two types of molecular structures. Multi oxygen atom containing compounds mainly detected in asphaltenes. Compound class distributions are similar for maltenes derived from n-C5 , n-C6 , and n-C7 , as well as for asphaltenes. The cyclic paraffin impurities in normal paraffin solvents had a significant influence on asphaltenes yields and heteroatom molecular composition. A portion of neutral N1 species and acidic O2 species adsorbed on asphaltenes could be dissolved by increasing washing time. Cautions should be exercised when interpreting the properties and composition of asphaltenes obtained with different experimental conditions.     

Trigonal‐Bipyramidal and Square‐Pyramidal Chromium?Manganese Chalcogenide Clusters, [E2CrMn2(CO)n]2− (E=S,Se, Te; n=9, 10): Synthesis,Electrochemistry, UV/Vis Absorption,and Computational Studies

The reactions of E powder (E=S, Se) with a mixture of Cr(CO)₆ and Mn₂(CO)₁₀ in concentrated solutions of KOH/MeOH produced two new mixed Cr? Mn? carbonyl clusters, [E₂CrMn₂(CO)₉]^2? (E=S, 1 ; Se, 2 ). Clusters 1 and 2 were isostructural with one another and each displayed a trigonal‐bipyramidal structure, with the CrMn₂ triangle axially capped by two μ₃‐E atoms. The analogous telluride cluster, [Te₂CrMn₂(CO)₉]^2? ( 3 ), was obtained from the ring‐closure of Te₂Mn₂ ring complex [Te₂Mn₂Cr₂(CO)₁₈]^2? ( 4 ). Upon bubbling with CO, clusters 2 and 3 were readily converted into square‐pyramidal clusters, [E₂CrMn₂(CO)₁₀]^2? (E=Se, 5 ; Te, 6 ), accompanied with the cleavage of one Cr? Mn bond. According to SQUID analysis, cluster 6 was paramagnetic, with S=1 at room temperature; however, the Se analogue ( 5 ) was spectroscopically proposed to be diamagnetic, as verified by TD‐DFT calculations. Cluster 6 could be further carbonylated, with cleavage of the Mn? Mn bond to produce a new arachno‐cluster, [Te₂CrMn₂(CO)₁₁]^2? ( 7 ). The formation and structural isomers, as well as electrochemistry and UV/Vis absorption, of these clusters were also elucidated by DFT calculations.     

New discrimination method combining hit quality index based spectral matching and voting

A new discrimination method, called hit quality index (HQI)-voting, that uses the HQI for discriminant analysis has been developed. HQI indicates the degree of spectral matching between two spectra as known. In this method, a library sample yielding the highest HQI value for an unknown sample was initially searched and a group containing this sample was chosen as the group for the unknown sample. When overall spectral features of two groups are quite close to each other, many library samples with similar HQI values could be available for an unknown sample. In this situation, the simultaneous consideration of multiple votes (several library samples with close HQI values) for final decision would be more robust. In order to evaluate the discrimination performance of HQI-voting, three different near-infrared (NIR) spectroscopic datasets composed of two sample groups were used: (1) domestic and imported sesame samples, (2) domestic and imported Angelica gigas samples, and (3) diesel and light gas oil (LGO) samples. For the purpose of comparison, principal component analysis–linear discriminant analysis (PCA–LDA), partial least squares–discriminant analysis (PLS–DA) as well as k-nearest neighbor (k-NN) were also performed using the same datasets and the resulting accuracies were compared. The discrimination performances improved with the use of HQI-voting in comparison with those resulted from PCA–LDA and PLS–DA. The overall results support that HQI-voting is a comparable discrimination method to that of existing factor-based multivariate methods.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

New Lignans from the Aerial Parts of Rudbeckia laciniata

Three new furofuran lignans, (+)‐4,4′‐O‐diangeloylpinoresinol ( 1 ), (+)‐4,4′‐O‐diangeloylmedioresinol ( 2 ), and (+)‐4,4′‐O‐diangeloylsyringaresinol ( 3 ), together with the known compound (+)‐syringaresinol, were isolated from the MeOH extract of Rudbeckia laciniata. The structure elucidation of these compounds were based on 1D‐ and 2D‐NMR, and HR‐ESI‐MS data. The additional structural evidence was obtained from alkaline hydrolysis of the compounds.     

Synthesis and Biological Evaluation of Novel Isonucleosides with 1,2,4‐Triazole‐3‐Carboxamide

Novel 1,2,4‐triazole isonucleosides (1 and 2) were efficiently synthesized starting from D‐ribose and D‐xylose, respectively. The key steps were condensation of cyclic sulfate 8 with methyl‐1,2,4‐triazole‐3‐carboxylate and nucleophilic displacement of the tosylate 15 with methyl‐1,2,4‐triazole‐3‐carboxylate, respectively.     

Synthesis of 1,5-diphenylpent-3-en-1-yne derivatives utilizing an aqueous B-alkyl Suzuki cross coupling reaction

1,5-Diphenylpent-3-en-1-yne derivatives were isolated in minor quantities from terrestrial plants and exhibited strong anti-inflammatory activity. A cross coupling reaction between B-benzyl-9-BBN and chloroenynes under mild condition was developed resulting in the formation of different 1,5-diphenylpent-3-en-1-yne derivatives with a full control on the E/Z selectivity. Several substrates bearing electron-donating and electron-withdrawing substituents were tolerable under the reaction conditions affording the corresponding products in good yields. This is the first study to report the synthesis of a vast array of novel 1,5-diphenylpent-3-en-1-yne derivatives paving the way for the preparation of tailored derivatives on mass scale necessary for biological studies and drug development.