A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.     

Baseband derived RF digital predistortion

A unique baseband derived RF predistortion system which uses lookup table coefficients extracted at baseband that directly RF envelope modulate a quadrature vector modulator is presented. The primary advantages of this architecture are that it combines the narrowband advantage of envelope predistortion with the accuracy of baseband predistortion.     

A miniature UWB planar monopole antenna with 5-GHz band-rejection filter and the time-domain characteristics

A planar monopole antenna with a staircase shape and small volume (25/spl times/26/spl times/1 mm/sup 3/) is proposed in this paper. With the use of a half-bowtie radiating element, the staircase-shape, and a modified ground plane structure, the proposed antenna has a very wide impedance bandwidth measured at about 11.6 GHz (2.9-14.5 GHz, bandwidth ratio about 1:5) below VSWR 2 including the WLAN band notched in the vicinity of 5 GHz. An omnidirectional radiation pattern is obtained. The group delay which is an indication of linearity between two proposed antennas is less than 1 ns. The electrical characteristics in terms of frequency and time domains and physical ones of the proposed antenna make it attractive for use in ultrawideband (UWB) systems.     

Optoelectronic and microwave transmission characteristics of indium solder bumps for low-temperature flip-chip applications

This paper describes low-temperature flip-chip bonding for both optical interconnect and microwave applications. Vertical-cavity surface-emitting laser (VCSEL) arrays were flip-chip bonded onto a fused silica substrate to investigate the optoelectronic characteristics. To achieve low-temperature flip-chip bonding, indium solder bumps were used, which had a low melting temperature of 156.7/spl deg/C. The current-voltage (I-V) and light-current (L-I) characteristics of the flip-chip bonded VCSEL arrays were improved by Ag coating on the indium bump. The I-V and L-I curves indicate that optical and electrical performances of Ag-coated indium bumps are superior to those of uncoated indium solder bumps. The microwave characteristics of the solder bumps were investigated by using a flip-chip-bonded coplanar waveguide (CPW) structure and by measuring the scattering parameter with an on-wafer probe station for the frequency range up to 40 GHz. The indium solder bumps, either with or without the Ag coating, provided good microwave characteristics and retained the original characteristic of the CPW signal lines without degradation of the insertion and return losses by the solder bumps.     

Parallel optical transmitter module using angled fibers and a V-grooved silicon optical bench for VCSEL array

We propose an advanced structure of optical subassembly (OSA) for packaging of the vertical-cavity surface-emitting laser (VCSEL) array, using (111) facet mirror of the V-groove ends formed in a silicon optical bench (SiOB) and angled fiber apertures. The feature of our OSA can provide a low optical crosstalk between neighboring channels, a low feedback reflection, and a large misalignment tolerance along the V-groove. We describe the optimized design of fiber angle, VCSEL position, and fiber position. The fabricated OSA structure consists of 12 channels of angled fiber array, 54.7/spl deg/ V-grooves, Au-coated mirrors on (111) end facet of the V-grooves, and flip-chip-bonded VCSEL array on a SiOB. In this structure, the beam emitted from the VCSEL is deflected at the 54.7/spl deg/ mirror of (111) end facet and propagated into the angled fiber. The angled fiber array was polished by 57/spl deg/. Fabricated OSAs showed a coupling efficiency of 30%-50% that is 25 times larger than that obtained from an OSA with a vertically flat fiber array. Our OSA showed large misalignment tolerance of about 90 /spl mu/m along the longitudinal direction in the V-groove. We fabricated a parallel optical transmitter module using the OSA and demonstrated 12 channels /spl times/2.5 Gb/s data transmission with a clear eye diagram.     

Performance Analysis on Coexistence of EDCA and Legacy DCF Stations in IEEE 802.11 Wireless LANs

The distributed coordination function (DCF) scheme of IEEE 802.11 MAC protocol does not support any concepts of quality of service (QoS) but the enhanced distributed channel access (EDCA) scheme in IEEE 802.11e standard provides QoS according to access categories using different access parameters. However, the legacy DCF stations may be used together with EDCA stations. In this letter, we investigate and analyze the performance discrimination when EDCA and DCF stations operate simultaneously     

Hepatoprotective Effects of Ixeris chinensis on Nonalcoholic Fatty Liver Disease Induced by High-Fat Diet in Mice: An Integrated Gut Microbiota and Metabolomic Analysis

Ixeris chinensis (Thunb.) Nakai (IC) is a folk medicinal herb used in Mongolian medical clinics for the treatment of hepatitis and fatty liver diseases even though its pharmacological mechanism has not been well characterized. This study investigated the hepatoprotective mechanism of IC on mice with nonalcoholic fatty liver disease (NAFLD) by integrating gut microbiota and metabolomic analysis. A high-fat diet (HFD) was used to develop nonalcoholic fatty liver disease, after which the mice were treated with oral IC (0.5, 1.5 and 3.0 g/kg) for 10 weeks. HFD induced NAFLD and the therapeutic effects were characterized by pathological and histological evaluations, and the serum indicators were analyzed by ELISA. The gut microbial and metabolite profiles were studied by 16S rRNA sequencing and untargeted metabolomic analysis, respectively. The results showed that the administration of IC resulted in significant decreases in body weight; liver index; serum biomarkers such as ALT, TG, and LDL-C; and the liver inflammatory factors IL-1β, IL-6, and TNF-α. The 16S rRNA sequencing results showed that administration of IC extract altered both the composition and abundance of the gut microbiota. Untargeted metabolomic analysis of liver samples detected a total of 212 metabolites, of which 128 were differentially expressed between the HFD and IC group. IC was found to significantly alter the levels of metabolites such as L-glutamic acid, pyridoxal, ornithine, L-aspartic acid, D-proline, and N4-acetylaminobutanal, which are involved in the regulation of glutamine and glutamate, Vitamin B6 metabolism, and arginine and proline metabolic pathways. Correlation analysis indicated that the effects of the IC extract on metabolites were associated with alterations in the abundance of Akkermansiaceae, Lachnospiraceae, and Muribaculaceae. Our study revealed that IC has a potential hepatoprotective effect in NAFLD and that its function might be linked to improvements in the composition of gut microbiota and their metabolites.     

Human Serum Amyloid a Impaired Structural Stability of High-Density Lipoproteins (HDL) and Apolipoprotein (Apo) A-I and Exacerbated Glycation Susceptibility of ApoA-I and HDL

Human serum amyloid A (SAA) is an exchangeable apolipoprotein (apo) in high-density lipoprotein (HDL) that influences HDL quality and functionality, particularly in the acute phase of inflammation. On the other hand, the structural and functional correlations of HDL containing SAA and apoA-I have not been reported. The current study was designed to compare the change in HDL quality with increasing SAA content in the lipid-free and lipid-bound states in reconstituted HDL (rHDL). The expressed recombinant human SAA1 (13 kDa) was purified to at least 98% and characterized in the lipid-free and lipid-bound states with apoA-I. The dimyristoyl phosphatidylcholine (DMPC) binding ability of apoA-I was impaired severely by the addition of SAA, while SAA alone could not bind with DMPC. The recombinant human SAA1 was incorporated into the rHDL (molar ratio 95:5:1, 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC): cholesterol: apoA-I) with various apoA-I:SAA molar ratios from 1:0 to 1:0.5, 1:1 and 1:2. With increasing SAA1 content, the rHDL particle size was reduced from 98 Å to 93 Å, and the α-helicity of apoA-I:SAA was decreased from 73% to 40% for (1:0) and (1:2), respectively. The wavelength maximum fluorescence (WMF) of tryptophan in rHDL was red-shifted from 339 nm to 345 nm for (1:0) and (1:2) of apoA-I:SAA, respectively, indicating that the addition of SAA to rHDL destabilized the secondary structure of apoA-I. Upon denaturation by urea treatment from 0 M to 8 M, SAA showed only a 3 nm red-shift in WMF, while apoA-I showed a 16 nm red-shift in WMF, indicating that SAA is resistant to denaturation and apoA-I had higher conformational flexibility than SAA. The glycation reaction of apoA-I in the presence of fructose was accelerated up to 1.8-fold by adding SAA in a dose-dependent manner than that of apoA-I alone. In conclusion, the incorporation of SAA in rHDL impaired the structural stability of apoA-I and exacerbated glycation of HDL and apoA-I.