Influence of elastomeric core–shell impact modifiers on mechanical properties of cellulose diacetate resin

Cellulose diacetate (CDA) plasticized with triacetine was blended by melting extrusion with two different kind of elastomeric core–shell impact modifiers: methyl methacrylate (MMA, shell) grafted onto styrene–butadiene–rubber (SBR, core) (MSBR) and MMA (shell) grafted onto butyl acrylate rubber (BAR, core) (MBAR). The different CDA/MSBR and CDA/MBAR blends were characterized by mechanical properties and morphological observation with various impact modifier contents. The highest impact strength was observed in the case of the blend with 5 wt% of MSBR and 3 wt% of MBAR, respectively. The tensile strength and Young’s modulus of CDA blends were decreased with increasing both MSBR and MBAR. According to SEM observation, MBAR was dispersed more effectively in CDA matrix than that of MSBR, thus indicating improved impact strength.     

A general simulation procedure for the electrical characteristics of metal-insulator-semiconductor tunnel structures

The algorithm is suggested for calculating the I–V characteristics of a voltage- or current-controlled metal-tunnel-thin insulator-semiconductor system. The basic underlying physical models are discussed. Applicability of the algorithm is confirmed by a comparison of the simulation results with the measurement data obtained by the authors and borrowed from the literature, for several different structures. The presented information is supposed to suffice for calculating the electrical characteristics of the investigated structures with the various combinations of materials: metal or polysilicon gate, single-layer or stacked insulator, and semiconductor with any doping type and level.     

Molecular dynamics simulation study on graphene-nanoribbon-resonators tuned by adjusting axial strain

A tunable graphene-nanoribbon (GNR)-resonator was investigated via classical molecular dynamics simulations. Resonance frequencies increased with increasing externally applied gate-force and axial-strain, and could be tuned above several hundred GHz. Tunable resonance frequencies achieved from the gate force were higher than those achieved from the axial-strain. The operating frequencies of GNR-resonators without axial-strain or with small axial-strains were most widely tuned by the gate, and almost linearly increased with increasing mean deflection. As the axial strain increased, the tunable ranges of the GNR-resonators were exponentially decreased, although the operating frequencies increased. GNR-resonators without axial-strain could be applied to wide-range-tuners, whereas GNR-resonators with high axial-strain could be applied to high-frequency-fine-tuners.     

Relationships between structure,ionization profile and sensitivity of exogenous anabolic steroids under electrospray ionization and analysis in human urine using liquid chromatography–tandem mass spectrometry

The relationships between the ionization profile, sensitivity, and structures of 64 exogenous anabolic steroids (groups I–IV) was investigated under electrospray ionization (ESI) conditions. The target analytes were ionized as [M + H]⁺ or [M + H–nH₂O]⁺ in the positive mode, and these ions were used as precursor ions for selected reaction monitoring analysis. The collision energy and Q3 ions were optimized based on the sensitivity and selectivity. The limits of detection (LODs) were 0.05–20 ng/mL for the 64 steroids. The LODs for 38 compounds, 14 compounds and 12 compounds were in the range of 0.05–1, 2–5 and 10–20 ng/mL, respectively. Steroids including the conjugated keto‐functional group at C3 showed good proton affinity and stability, and generated the [M + H]⁺ ion as the most abundant precursor ion. In addition, the LODs of steroids using the [M + H]⁺ ion as the precursor ion were mostly distributed at low concentrations. In contrast, steroids containing conjugated/unconjugated hydroxyl functional groups at C3 generated [M + H ? H₂O]⁺ or [M + H ? 2H₂O]⁺ ions, and these steroids showed relatively high LODs owing to poor stability and multiple ion formation. An LC‐MS/MS method based on the present ionization profile was developed and validated for the determination of 78 steroids (groups I–V) in human urine. Copyright © 2015 John Wiley & Sons, Ltd.     

Hybrid film of chemically modified graphene and vapor-phase-polymerized PEDOT for electronic nose applications

A hybrid of graphene and conducting polymer holds great potential as the active materials for high performance chemical sensor application. In this work, a thin hybrid film of reduced graphene oxide (RG-O) and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated by means of vapor phase polymerization and explored as active material for chemical sensors. The chemical sensors based on hybrid film of RG-O and PEDOT are capable of detecting electrical signals caused by the absorption of trace levels of different analyte vapors with high sensitivity, selectivity and fast response.     

High‐Precision Temperature‐Controllable Metal‐Coated Polymeric Molds for Programmable,Hierarchical Patterning

Nanofabrication is an indispensable process in nanoscience and nanotechnology. Unconventional lithographic techniques are often used for fabrication as alternatives to photolithography because they are faster, more cost‐effective, and simpler to use. However, these techniques are limited in scalability and utility because of the collapse of preprinted structures during step‐and‐repeat processes. This study proposes a new class of temperature‐controllable polymeric molds that are coated with a metal such that any site‐specific patterning can be accomplished in a programmable manner using selective contact‐dewetting lithography. The lithography allows sub‐100 nm patterning, step‐and‐repeat processing, and hierarchical structure fabrication. The programmable feature of the lithography can be utilized for the structural coloring and shaping of objects. Large‐area programmable patterning, semiconductor device manufacturing, and the fabrication of iridescent security devices would benefit from the unique features of the proposed strategy.     

A Low‐Cost Method to Evaluate Absorber Reflectivity Using an Antenna with a Small Radiating Aperture and Frequency‐Domain Instrument

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency‐domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non‐cutting examination.     

Nonlinear obstacle problems with double phase in the borderline case

In this paper we study a double phase problem with an irregular obstacle. The energy functional under consideration is characterized by the fact that both ellipticity and growth switch between a type of polynomial and a type of logarithm, which can be regarded as a borderline case of the double phase functional with $(p,q)$-growth. We obtain an optimal global Calderón–Zygmund type estimate for the obstacle problem with double phase in the borderline case.