Adenovirus adenine nucleotide translocator-2 shRNA effectively induces apoptosis and enhances chemosensitivity by the down-regulation of ABCG2 in breast cancer stem-like cells

Cancer stem cells (CSCs) are resistant to chemo- and radio-therapy, and can survive to regenerate new tumors. This is an important reason why various anti- cancer therapies often fail to completely control tumors, although they kill and eliminate the bulk of cancer cells. In this study, we determined whether or not adenine nucleotide translocator-2 (ANT2) suppression could also be effective in inducing cell death of breast cancer stem-like cells. A sub-population (SP; CD44+/ CD24-) of breast cancer cells has been reported to have stem/progenitor cell properties. We utilized the adeno- ANT2 shRNA virus to inhibit ANT2 expression and then observed the treatment effect in a SP of breast cancer cell line. In this study, MCF7, MDA-MB-231 cells, and breast epithelial cells (MCF10A) mesenchymally-transdifferentiated through E-cadherin knockdown were used. ANT2 expression was high in both stem-like cells and non-stem-like cells of MCF7 and MDA-MB-231 cells, and was induced and up-regulated by mesenchymal transdifferentiation in MCF10A cells (MCF10A(EMT)). Knockdown of ANT2 by adeno-shRNA virus efficiently induced apoptotic cell death in the stem-like cells of MCF7 and MDA-MB-231 cells, and MCF10A(EMT). Stem-like cells of MCF7 and MDA-MB-231, and MCF10A(EMT) cells exhibited increased drug (doxorubicin) resistance, and expressed a multi-drug resistant related molecule, ABCG2, at a high level. Adeno-ANT2 shRNA virus markedly sensitized the stem-like cells of MCF7 and MDA-MB-231, and the MCF10A(EMT) cells to doxorubicin, which was accompanied by down-regulation of ABCG2. Our results suggest that ANT2 suppression by adeno-shRNA virus is an effective strategy to induce cell death and increase the chemosensitivity of stem-like cells in breast cancer.     

Azaphthalocyanines with fused triazolo rings: formation of sterically stressed constitutional isomers

The presented work deals with synthesis and isolation of constitutional isomers of triazolo-fused azaphthalocyanines. Distribution of the isomers did not follow the statistical calculations due to steric effects of the substituents preferring the least sterically stressed C(4h) isomer.     

Fluorogenic sensing of CH3CO2- and H2PO4- by ditopic receptor through conformational change

Cyclo-bis-(urea-3,6-dichlorocarbazole) (1) forms a 1 : 2 complex with CH(3)CO(2)(-) and H(2)PO(4)(-) through hydrogen bonding with the two urea moieties, resulting in fluorescence enhancement via a combined photoinduced electron transfer (PET) and energy transfer mechanism. The binding mechanism involves a conformational change of the two urea receptors to a trans orientation after binding of the first anion, which facilitates the second interaction.     

Nanosilver‐Decorated TiO2 Nanofibers Coated with a SiO2 Layer for Enhanced Light Scattering and Localized Surface Plasmons in Dye‐Sensitized Solar Cells

Enhanced harvesting of visible light is vital to the development of highly efficient dye‐sensitized solar cells (DSSCs). Nanosilver‐decorated TiO₂ nanofibers (Ag@TiO₂ NFs) were synthesized by depositing chemically reduced Ag ions onto the surface of electrospun TiO₂ nanofibers (TiO₂ NFs). The prepared Ag@TiO₂ NFs were coated with SiO₂ (SiO₂@Ag@TiO₂ NFs) by using PVP as coupling agent for protecting corrosion of Ag nanoparticle by I^?/${{\rm I}{{- \hfill \atop 3\hfill}}}$ solution. The fabricated SiO₂@Ag@TiO₂ NFs demonstrated a synergistic effect of light scattering and surface plasmons, leading to an enhanced light absorption. Moreover, an anode consisting of SiO₂@Ag@TiO₂ NFs incorporating TiO₂ nanoparticles (NPs) increased light harvesting without substantially sacrificing dye attachment. The power conversion efficiency increased from 6.8 to 8.7 % for a thick film (10 μm), that is, 28 %. These results suggest that SiO₂@Ag@TiO₂ NFs are promising materials for enhanced light absorption in dye‐sensitized solar cells.     

Chromium porphyrin arrays as spintronic devices

Spintronic devices are very important for futuristic information technology. Suitable materials for such devices should have half-metallic properties so that only one spin passes through the device. In particular, organic half metals have the advantage that they may be used for flexible devices and have a long spin-coherence length. We predict that the one-dimensional infinite chromium porphyrin array, which we call Cr-PA(∞), shows half-metallic behavior when the spins on the chromium atoms are in a parallel alignment. Since the chromium atoms are separated by a large distance (>8 ?), the coupling between spins is small and thus their directions can be readily controlled by an external magnetic field. In the ferromagnetic state, the band gap for major spin electrons is 0.30 eV, while there is no band gap for the minor spin electrons, thus reflecting the half-metallic property. This unique property originates from the high spin state of Cr which results in the spin asymmetry of the conduction band in Cr-PA(∞). Electron transport of Cr-PA(1,2,3) is calculated with the nonequilibrium Green function technique in the presence of Au electrodes. It turned out that the spin-filtering ability appears from the dimeric Cr-PA(2). Thus, a new organometallic framework for designing a spin filter is proposed. Though many others have designed novel spintronic devices, none of them are realized due to the lack of a practical fabrication method at present. However, the porphyrin-based spintronic device provides a synthesizable framework.     

Induction-driven stabilization of the anion-π interaction in electron-rich aromatics as the key to fluoride inclusion in imidazolium-cage receptors

Intermolecular interactions that involve aromatic rings are key processes in both chemical and biological recognition. It is common knowledge that the existence of anion-π interactions between anions and electron-deficient (π-acidic) aromatics indicates that electron-rich (π-basic) aromatics are expected to be repulsive to anions due to their electron-donating character. Here we report the first concrete theoretical and experimental evidence of the anion-π interaction between electron-rich alkylbenzene rings and a fluoride ion in CH(3)CN. The cyclophane cavity bridged with three naphthoimidazolium groups selectively complexes a fluoride ion by means of a combination of anion-π interactions and (C-H)(+)···F(-)-type ionic hydrogen bonds. (1)H NMR, (19)F NMR, and fluorescence spectra of 1 and 2 with fluoride ions are examined to show that only 2 can host a fluoride ion in the cavity between two alkylbenzene rings to form a sandwich complex. In addition, the cage compounds can serve as highly selective and ratiometric fluorescent sensors for a fluoride ion. With the addition of 1 equiv of F(-), a strongly increased fluorescence emission centered at 385 nm appears at the expense of the fluorescence emission of 2 centered at 474 nm. Finally, isothermal titration calorimetry (ITC) experiments were performed to obtain the binding constants of the compounds 1 and 2 with F(-) as well as Gibbs free energy. The 2-F(-) complex is more stable than the 1-F(-) complex by 1.87 kcal mol(-1), which is attributable to the stronger anion-π interaction between F(-) and triethylbenzene.     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.