Failure analysis of Cu(In,Ga)Se2 photovoltaic modules: degradation mechanism of Cu(In,Ga)Se2 solar cells under harsh environmental conditions

High‐temperature‐induced and humidity‐induced degradation behaviors were investigated through the failure analysis of encapsulated Cu(In,Ga)Se₂ (CIGS) modules and non‐encapsulated CIGS cells. After being exposed to high temperature (85 °C) for 1000 h, the efficiency loss of CIGS modules and the resistivities of the aluminum‐doped zinc oxide (AZO) layer, CIGS layer, and Mo layer were slightly increased. After damp heat (DH) testing (85 °C/85% RH), the efficiency of some modules decreased significantly accompanied by discoloration, and in these areas, the resistivity of the AZO layers increased markedly. The causes of degradation of CIGS cells after high temperature and DH tests were suggested through X‐ray photoelectron spectroscopy analysis. The high‐temperature‐induced degradation behaviors were revealed to be increases in series resistance of the CIGS cells, due to the adsorption of oxygen on the AZO, CIGS, and Mo layers. The degradation behavior after DH (85 °C/85% RH) exposure was caused by the adsorption of oxygen, as well as the generation of Zn(OH)₂ due to water molecules. In particular, the humidity‐induced degradation behavior in discolored CIGS modules was ascribed to the generation of Zn(OH)₂ and carboxylic acids in the AZO layer, due to a chemical reaction between the AZO, ethylene‐vinyl acetate copolymer, and water. Copyright © 2014 John Wiley & Sons, Ltd.     

Polymerization of 2,4-hexadiyn-1,6-diol by chemical vapor deposition

2,4-Hexadiyn-1,6-diol (HDO) was polymerized on glass and silicon plates by chemical vapor deposition without transition metal catalysis to form homogeneous thin films. Structural properties of the films were investigated by FT-IR, UV-visible, Raman, x-ray diffraction, and XPS spectroscopic analyses. The structure of CVD-polymerized HDO (CVD-PHDO) films was different from that of metathesis polymerized HDO (metathesis-PHDO), showing a polyacene-based structure but no polyene structure with acetylenic side groups. © 1996 John Wiley & Sons, Inc.     

A shock-tube measurement of the SiO(E1Σ+ − X1Σ+) transition moment

The sum of the squares of the electronic transition moments, Σ|R_e|², for the E¹Σ⁺ ?X¹Σ⁺ band system of SiO has been determined from absorption measurements conducted in the reflected-shock region of a shock tube. The test gas was produced by shock-heating a mixture of SiCl₄, N₂O and Ar, and the spectra were recorded photographically in the 150–230 nm wavelength range. The values of the Σ|R_e|² were determined by comparing the measured absorption spectra with those produced by a line-be-line synthetic spectrum calculation. The value of the Σ|R_e|² so deduced at an r-centroid value of 3.0 Bohr was 0.86±0.10 atomic units.     

Inhibitory Effects of Coumarin Derivatives on Tyrosinase

In this study, a series of coumarin derivatives were synthesized and their inhibitory effects on the activity of mushroom tyrosinase were evaluated. As a result of measuring the inhibition of tyrosinase activity of these derivatives, the compounds 3e (1.05 μM), 3f (0.83 μM), 3h (0.85 μM), 3i (1.05 μM), and 3k (0.67 μM) of the geranyloxycoumarin derivatives were highly active at a concentration of 0.8%. The geranyloxycoumarin derivatives exhibited better activity than the hydroxycoumarin derivatives. Among the geranyloxycoumarin derivatives, compound 3k was two times more active than arbutin, a positive control, at a concentration of 0.4%. The above results suggest that geranyloxycoumarin derivatives have great potential for application as functional cosmetic ingredients with tyrosinase-inhibiting activity.     

Tunneling in the loss of hydrogen chloride from isopropyl chloride cation

The unimolecular dissociation of isopropyl chloride cation has been investigated using mass-analyzed ion kinetic energy spectrometry. The C3H6*+ ion was the only product ion in the metastable dissociation. The kinetic energy release distribution for the HCl loss was determined. Ab initio molecular orbital calculations were performed at the MP2/6-311++G(d,p) level together with single point energy calculations at the QCSID(T)/6-311++G(2d,2p) level. The calculations show that the molecular ion rearranges to an ion-dipole complex prior to loss of HCl via a transition state containing a four-membered ring. The rearrangement involves H atom transfer. On the basis of the potential energy surface obtained for the loss of HCl and Cl*, the rate constants were calculated by transition-state statistical theories with considering tunneling effect. From the calculated result, it is proposed that the observed HCl loss would occur via tunneling through the barrier for isomerization to the ion-dipole complex, CH3CHCH2*+...HCl.     

Examining the robustness of first-principles calculations for metal hydride reaction thermodynamics by detection of metastable reaction pathways

First principles calculations have played a useful role in screening mixtures of complex metal hydrides to find systems suitable for H(2) storage applications. Standard methods for this task efficiently identify the lowest energy reaction mechanisms among all possible reactions involving collections of materials for which DFT calculations have been performed. The resulting mechanism can potentially differ from physical reality due to inaccuracies in the DFT functionals used, or due to other approximations made in estimating reaction free energies. We introduce an efficient method to probe the robustness of DFT-based predictions that relies on identifying reactions that are metastable relative to the lowest energy reaction path predicted with DFT. An important conclusion of our calculations is that in many examples DFT cannot unambiguously predict a single reaction mechanism for a well defined metal hydride mixture because two or more mechanisms have reaction energies that differ by a small amount. Our approach is illustrated by analyzing a series of single step reactions identified in our recent work that examined reactions with a large database of solids [Kim et al., Phys. Chem. Chem. Phys. 2011, 13, 7218].     

Isolation of an Organic Solvent-Tolerant Lipolytic Enzyme from Uncultivated Microorganism

Although the use of lipases as biocatalysts has frequently been proposed, it is yet scarcely being implemented in industrial processes. This is mainly due to the difficulties associated with the discovery and engineering of new enzymes and the lack of versatile screening methods. In this study, we screened the available strategy from a metagenomic pool for the organic solvent-tolerant lipase with enhanced performance for industrial processes. A novel lipase was identified through functional screening from a metagenomic library of activated sludge in an Escherichia coli system. The gene encoding the lipase from the metagenomic pool, metalip1, was sequenced and cloned by PCR. Metalip1 encoding a polypeptide of 316 amino acids had typical residues essential for lipase such as pentapeptide (GXSXGG) and catalytic triad sequences (Ser160, Asp260, and His291). The deduced amino acid sequence of metalip1 showed high similarity to a putative lipase from Pseudomonas sp. CL-61 (80 %, ABC25547). Metalip1 was expressed in E. coli BL21 (DE3) with a his-tag and purified using a Ni-NTA chelating column and characterized. This enzyme showed high expression level and solubility in the heterologous E. coli host. This enzyme was active over broad organic solvents. Among organic solvents examined, dimethyl formamide was the best organic solvent for metalip1. We showed that function-based strategy is an effective method for fishing out an organic solvent-tolerant lipase from the metagenomic library. Also, it revealed high catalytic turnover rates, which make them a very interesting candidate for industrial application.