综合性化学实验的线上线下混合式教学——以水泥分析为例

水泥熟料分析是一个经典的综合性实验,涉及重量分析和配位滴定分析的很多原理及操作。为了有效开展实验教学、缩短课堂讲解时间、客观评价学生实验数据及结果,我们开展了线上线下混合式教学,引导学生课前自主学习,训练学生综合和创新实验技能。这一改革提高了实验教学质量,取得了较好的教学效果。     

Fabrication and characterization of glutathione-responsive nanoparticles from the disulfide bond-bridged block copolymer

The purpose of this paper is to fabricate novel nanoparticles (NPs) from a single disulfide bond-bridged block copolymer poly(hydroxyethyl methacrylate)-S-S-polycaprolactone (PHEMA-S-S-PCL). The novel biomaterial was synthesized by ring-opening polymerization and reversible addition–fragmentation chain transfer polymerization. The cargo-free NPs were fabricated with the solvent evaporation method, and studies on NPs' characterizations were carried out. The hydrogen nuclear magnetic resonance (¹H NMR) and Fourier transform infrared spectroscopy spectra confirmed the synthesis of PHEMA-S-S-PCL copolymer. Thermo-gravimetric analysis curves indicated that the obtained PHEMA-S-S-PCL copolymer had good thermostability. Transmission electron microscopy and dynamic light scatter results suggested that the cargo-free NPs were in round shapes with an average diameter of 103.6 ± 0.12 nm. The low critical micelle concentration of cargo-free NPs (7.9 × 10^?4 mg/ml) indicated that these NPs would keep their spherical shapes after being attenuated by abundant liquid (e.g., blood or body fluid). Furthermore, these NPs showed high stability at the presence of bovine serum albumin. Therefore, it could be speculated that these NPs would not be absorbed by proteins in blood, and they could be used as a candidate carrier for drug delivery.     

微波萃取–高效液相色谱荧光检测法测定食品包装用纸中11种荧光增白剂

采用微波萃取高效液相色谱荧光检测法测定食品包装用纸中11种荧光增白剂含量.将样品剪成约0.5 cm×0.5 cm的碎片,用体积分数为40％的乙腈水溶液(含体积分数为0.6％的三乙胺),于80℃微波萃取15 min,用高效液相色谱仪进行定性定量分析.采用Kromasil 100–5型C18柱(250 mm×4.6 mm,5μm)作为分析柱,荧光激发波长为362 nm,发射波长为410 nm,11种荧光增白剂可以较好的分离.11种荧光增白剂质量浓度线性范围为2～150μg/L,相关系数均不小于0.9996,方法检出限为0.1～0.2 mg/kg,定量限为0.3～0.6 mg/kg.样品加标平均回收率为86.0％～108.4％,相对标准偏差为0.4％～4.9％(n=6).该方法前处理简便,检测高效,灵敏度高.     

Effect of Aluminum Alloy Surface Modification on Adhesion of the Modified Polyurethane Coating and Its Corrosion Protective Performance北大核心CSCD

The ordinary organic coatings on aluminum alloy usually encounter a problem of low adhesion to the substrate, which results in destruction and failure of the long-term protective performance of the anticorrosion systems. The surface modification of aluminum alloy is able to enhance the adhesion of organic coating on aluminum alloys, and to improve their protective performance. In this work, a combined surface modification of anodic oxidation and mussel adhesion protein/CeO2/3-aminopropyltriethoxysilane composite film (MCA) was developed on the aluminum alloy. The adhesion of modified polyurethane coated on the treated aluminum alloy and its corrosion protective performance were evaluated comprehensively by using contact angle, adhesion strength, electrochemical impedance spectroscopy (EIS), and scanning reference electrode technique (SRET). The measurements of EIS and SRET demonstrated that the MCA composite film on anodic oxidized Al possessed self-healing function and provided effective protection against early corrosion of aluminum alloy. The pull-off test showed that both anodic oxidation treatment and MCA composite film modification were able to increase the adhesion of modified polyurethane coating on aluminum alloy, and their combined action were supposed to remarkably enhance the adhesion strength up to 17.1 MPa. The reason for the improvement of adhesion was that the anodic oxidation treatment and MCA composite film modification could improve the surface roughness of aluminum alloy, and enhance the surface wettability and surface polarity, which is beneficent to enhance the bonding of the modified polyurethane coating to aluminum alloy surface. The EIS results showed that no any corrosion occurred for the modified polyurethane coating on the treated aluminum alloy during 65 d immersion in 3.5wt.% NaCl solution. The impedance value in low frequency range of the modified polyurethane coating always maintained at a high order of magnitude on the aluminum alloy treated by anodic oxidation and MCA composite film modification, showing an excellent protective performance of the coating system. The evaluation of Neutral Salt Spray (NSS) indicated that the modified polyurethane coating on the treated aluminum alloy owned superior corrosion protection performance, and the adhesion strength remained 13.1 MPa and no any corrosion was found at the scratch locations even after 1200 h of salt spray testing. It was concluded that combination of anodic oxidation and MCA composite film were capable of significantly improving the adhesion of modified polyurethane coating on aluminum alloy and providing long-term effective corrosion protection for aluminum alloy. © 2021 Authors. All rights reserved.     

Supramolecular Engineering Strategy to Construct BODIPY-Based White Light Emission Materials

Two kinds of 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) dyads BDP-OH containing 4-hydroxystyrene groups and BDP-PY bearing pyridinyl units were prepared. In addition, a naphthalene derivative NAP-PY modified by pyridinyl moieties substituent was made. The above three dyads could be used to construct white-light emission (WLE) material by a supramolecular engineering strategy due to their three primary colors of blue, green and red. The supramolecular correlations between the hydroxyl group of BDP-OH and the pyridinyl groups of NAP-PY and BDP-PY were confirmed by ¹H NMR titration, 2D NOESY and FTIR. A fluorescence monitor application was carried out based on the realization of WLE. This work might be useful for designing other WLE supramolecular systems and image display.     

溶胶-凝胶法制备Pb(Zr1?xTix)O3复合梯度薄摸以及介电与热释电特性

"在Pt/Ti/SiO2/Si基片上用溶胶-凝胶法生长制备了PZT(Pb(Zr1-xTix)O3)复合梯度铁电薄膜． 薄膜最终结构由6层组成,"向上"梯度薄膜在Pt底电极上的第一层从PbZrO3开始,顶层是PZT(50/50),即第一层是PbZrO3,第二层PZT90/10 (10%Ti),第三层是PZT80/20,第四层PZT70/30,第五层PZT60/40,第六层PZT50/50．每一层与此相反的是"向下"梯度PZT薄膜．用X射线衍射、俄歇电子能谱和阻抗分析来研究梯度薄膜的结构与介电特性．600     

Application of the Redox-Transmetalation Procedure to Access Divalent Lanthanide and Alkaline-Earth NHC Complexes**

Divalent lanthanide and alkaline-earth complexes supported by N-heterocyclic carbene (NHC) ligands have been accessed by redox-transmetalation between air-stable NHC-AgI complexes and the corresponding metals. By using the small ligand 1,3-dimethylimidazol-2-ylidene (IMe), two series of isostructural complexes were obtained: the tetra-NHC complexes [LnI₂(IMe)₄] (Ln=Eu and Sm) and the bis-NHC complexes [MI₂(IMe)₂(THF)₂] (M=Yb, Ca and Sr). In the former, distortions in the NHC coordination were found to originate from intermolecular repulsions in the solid state. Application of the redox-transmetalation strategy with the bulkier 1,3-dimesitylimidazol-2-ylidene (IMes) ligand yielded [SrI₂(IMes)(THF)₃], while using a similar procedure with Ca metal led to [CaI₂(THF)₄] and uncoordinated IMes. DFT calculations were performed to rationalise the selective formation of the bis-NHC adduct in [SrI₂(IMe)₂(THF)₂] and the tetra-NHC adduct in [SmI₂(IMe)₄]. Since the results in the gas phase point towards preferential formation of the tetra-NHC complexes for both metal centres, the differences between both arrangements are a result of solid-state effects such as slightly different packing forces.     

Pyrolysis and combustion model of oil sands from non-isothermal thermogravimetric analysis data

Thermogravimetric (TG) data of oil sand obtained at Engineering Research Center of Oil Shale Comprehensive Utilization were studied to evaluate the kinetic parameters for Indonesian oil sand samples. Experiments were carried out at heating rates of 5, 15, and 25 °C min^?1 in nitrogen, 10, 20, and 50 °C min^?1 in oxygen atmosphere, respectively. The extent of char combustion was found out by relating TG data for pyrolysis and combustion with the ultimate analysis. Due to distinct behavior of oil shale during pyrolysis, TG curves were divided into three separate events: moisture release, devolatilization, and evolution of fixed carbon/char, where for each event, kinetic parameters, based on Arrhenius theory, were calculated. Coats–Redfern method, Flynn–Wall–Ozawa method, and distributed activation energy model method have been used to determine the activation energies of degradation. The methods are compared with regard to their characteristics and the ease of interpretation of the thermal kinetics. Activation energies of the samples were determined by three different methods and the results are discussed.     

Single‐crystalline gold microplates grown on substrates by solution‐phase synthesis

Chemically synthesized single‐crystalline gold microplates have been attracting increasing interest because of their potential as high‐quality gold films for nanotechnology. We present the growth of tens of nanometers thick and tens of micrometers large single‐crystalline gold plates directly on solid substrates by solution‐phase synthesis. Compared to microplates deposited on substrates from dispersion phase, substrate‐grown plates exhibit significantly higher quality by avoiding severe small‐particle contamination and aggregation. Substrate‐grown gold plates also open new perspectives to study the growth mechanism via step‐growth and observation cycles of a large number of individual plates. Growth models are proposed to interpret the evolution of thickness, area and shape of the plates. It is found that the plate surface remains smooth after regrowth, implying the applicability of regrowth for producing giant plates as well as unique single‐crystalline nano‐structures.     

AgI Microplate Monocrystals with Polar {0001} Facets: Spontaneous Photocarrier Separation and Enhanced Photocatalytic Activity

Elucidating the facet‐dependent photocatalytic activity of semiconductor photocatalysts is important in improving the overall efficiency of photocatalysis. Furthermore, combining facet control with selective deposition of oxidation and/or reduction cocatalysts on specific faces of semiconductor photocatalysts is potentially an effective strategy to synergistically optimize the functionality of photocatalysts. In the present study, high‐purity wurtzite‐type β‐AgI platelet microcrystals with polar {0001} facets were prepared by a facile polyvinylpyrrolidone‐assisted precipitation reaction. The polar‐faceted AgI microplates were used as archetypes to demonstrate preferential diametric migration (i.e., effective separation) of photogenerated electrons and holes along the c axis. Such vectorial electron–hole separation stems from the asymmetric surface structures, which give rise to distinct photoexcited reaction behaviors on the ±(0001) polar facets of wurtzite‐type semiconductors. Furthermore, on selective deposition of Ag and MnO_x (1.5<x<2) cocatalysts on the reductive (0001) and oxidative (000$\bar 1$ ) facets, respectively, photocatalytic activity of the AgI microplates in degrading organic pollutants was dramatically enhanced thanks to the broad light‐absorption range, strong dye‐adsorption ability, and effective spatial separation of photocarriers.