Predicting the Performance Deterioration of a Three-Shaft Industrial Gas Turbine

The gas turbine was one of the most important technological developments of the early 20th century, and it has had a significant impact on our lives. Although some researchers have worked on predicting the performance of three-shaft gas turbines, the effects of the deteriorated components on other primary components and of the physical faults on the component measurement parameters when considering the variable inlet guide valve scheduling and secondary air system for three-shaft gas turbine engines have remained unexplored. In this paper, design point and off-design performance models for a three-shaft gas turbine were developed and validated using the GasTurb 13 commercial software. Since the input data were limited, some engineering judgment and optimization processes were applied. Later, the developed models were validated using the engine manufacturer’s data. Right after the validation, using the component health parameters, the physical faults were implanted into the non-linear steady-state model to investigate the performance of the gas turbine during deterioration conditions. The effects of common faults, namely fouling and erosion in primary components of the case study engine, were simulated during full-load operation. The fault simulation results demonstrated that as the severity of the fault increases, the component performance parameters and measurement parameters deviated linearly from the clean state. Furthermore, the sensitivity of the measurement parameters to the fault location and type were discussed, and as a result they can be used to determine the location and kind of fault during the development of a diagnosis model.     

A proposal for a convertible stadium roof structure derived from Watt-I linkage

In this paper, a novel convertible stadium roof structure is introduced, which has been derived from a special geometric configuration of Watt-I linkage, a 1-DoF mechanism used in robot technologies as anthropomorphic fingers. The proposed structure can offer a wide range of different shape configurations according to the environmental conditions and spatial needs, thus offering several aesthetic and functional advantages over existing solutions. This paper serves as a feasibility investigation of this concept, mainly from geometric and structural point of view. To that affect, first kinematic analysis and geometric design of this linkage are introduced. Then, structural analyses of the proposed structure with realistic dimensions and loading conditions are performed in three different geometric configurations, in order to discuss strength and stiffness limitations. Finally, potential cover materials and actuators are briefly discussed.     

A structured methodology for assessing and improving e-services in digital cities

Many cities all over the world are making large investments for the construction of big network infrastructures, in order to offer to local public organizations, businesses and citizens high speed connectivity, and on top of them useful e-services, aiming to achieve various social and economic objectives. The value generated from these costly ‘digital city’ investments is actually the value provided to the citizens and businesses by the e-services that will be developed and run on these network infrastructures. This paper proposes and validates a structured methodology for assessing and improving e-services developed in digital cities. The proposed methodology assesses the various types of value generated by an e-service, and also the relations among them, allowing a more structured evaluation, a deeper understanding of the value generation process and also identification and prioritization of the improvements that should be made in the e-service with the usually scarce resources in municipalities. This methodology is applied for the evaluation of an e-learning service developed in the Greek city of Karlovassi for young citizens, and also for the prioritization of the necessary improvements in it. The above application provided positive and encouraging evidence concerning the validity, usefulness and applicability of the proposed method.     

Diblock copolymers of polystyrene‐b‐poly(1,3‐cyclohexadiene) exhibiting unique three‐phase microdomain morphologies

The synthesis and molecular characterization of a series of conformationally asymmetric polystyrene‐block‐poly(1,3‐cyclohexadiene) (PS‐b‐PCHD) diblock copolymers (PCHD: ～90% 1,4 and ～10% 1,2), by sequential anionic copolymerization high vacuum techniques, is reported. A wide range of volume fractions (0.27 ≤ ?_PS ≤ 0.91) was studied by transmission electron microscopy and small‐angle X‐ray scattering in order to explore in detail the microphase separation behavior of these flexible/semiflexible diblock copolymers. Unusual morphologies, consisting of PCHD core(PCHD‐1,4)–shell(PCHD‐1,2) cylinders in PS matrix and three‐phase (PS, PCHD‐1,4, PCHD‐1,2) four‐layer lamellae, were observed suggesting that the chain stiffness of the PCHD block and the strong dependence of the interaction parameter χ on the PCHD microstructures are important factors for the formation of this unusual microphase separation behavior in PS‐b‐PCHD diblock copolymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1564–1572     

全球移动运营商对LTE终端设备的测试方案

正1引言时至今日,移动用户对他们手中终端的性能要求越来越高,特别是那些目前已经广泛使用的智能终端。如果不能满足这些期望和要求,用户很可能感到失望并减少使用手中的终端进行通信业务,甚至考虑更换可以提供更优质终端的移动运营商。这就是移动运营商为何现在如此关注并且投入大量人力物力在终端的品质验证上。     

Production of antibodies from chicken egg yolk to phenyl- N -methylcarbamate insecticides for analytical purposes

With the aim of developing polyclonal antibodies binding as many phenyl-N-methylcarbamate insecticides (PNMCs) as possible, IgY antibodies were produced in laying hens. Two haptens (3-(2,6-dimethyl-4-(methylcarbamoyl)phenylaminocarbonyl)propanoic acid and 4-((2,6-dimethyl-4-(methylcarbamoyl)phenylaminocarbonyl)-3,3-dimethyl)butanoic acid) were synthesized preserving the major structural features of PNMCs, by a novel synthetic pathway. These haptens differed only in the spacer arm incorporated. Immunizing antigen and coating antigen were prepared by coupling the first hapten with bovine serum albumin and the second with thyroglobulin, from porcine thyroid glands, respectively. The titre and maturation increase in the developed antibodies, in the egg yolk, were assessed by non-competitive ELISA. Avidity and cross-reactivity of the antibodies with selected pesticides were estimated by means of competitive ELISA. The produced IgYs exhibited a high binding capacity to carbaryl, trimethacarb, metolcarb, aminocarb, and promecarb. These antibodies can be used for immunosorbent preparation for analytical purposes.     

Optimization of Vacuum-Microwave-Assisted Extraction of Natural Polyphenols and Flavonoids from Raw Solid Waste of the Orange Juice Producing Industry at Industrial Scale

Orange pomace (OP) is a solid waste produced in bulk as a byproduct of the orange juice industry and accounts for approximately 50% of the quantity of the fruits processed into juice. In numerous literature references there is information about diverse uses of orange pomace for the production of high-added-value products including production of natural antioxidant and antimicrobial extracts rich in polyphenols and flavonoids which can substitute the hazardous chemical antioxidants/antimicrobials used in agro-food and cosmetics sectors. In this work and for the first time, according to our knowledge, the eco-friendly aqueous vacuum microwave assisted extraction of orange pomace was investigated and optimized at real industrial scale in order to produce aqueous antioxidant/antimicrobial extracts. A Response Surface Optimization methodology with a multipoint historical data experimental design was employed to obtain the optimal values of the process parameters in order to achieve the maximum rates of extraction of OP total polyphenols and/or total flavonoids for economically optimum production at industrial scale. The three factors used for the optimization were: (a) microwave power (b) water to raw pomace ratio and (c) extraction time. Moreover, the effectiveness and statistical soundness of the derived cubic polynomial predictive models were verified by ANOVA.