Autoxidation of lipids in parchment

Historic parchment is a macromolecular material, which is complex due to its natural origin, inhomogeneity of the skin structure, unknown environmental history and potential localised degradation. Most research into its stability has so far focussed on thermal and structural methods of analyses.Using gas chromatographic analysis of the atmosphere surrounding parchment during oxidation, we provide the experimental evidence on the production of volatile aldehydes, which can be the products of lipid autoxidation. Oxidation of parchment with different aldehyde emissions was additionally followed in situ using chemiluminometry and the same techniques were used to evaluate the oxidation of differently delipidised parchment. It was shown that the production of peroxides and the emission of aldehydes from the material decrease with lower lipid content. Building on this evidence, we can conclude that the presence of lipids (either initially present in the skin or resulting from conservation intervention) leads to oxidative degradation of collagen and that the non-destructive analysis of the emission of volatiles could be used as a quick tool for evaluation of parchment stability.     

Novel concept for mains voltage proportional input current shaping of a VIENNA rectifier eliminating controller multipliers

This paper proposes a novel mains voltage proportional input current control concept eliminating the multiplication of the output voltage controller output and the mains ac phase voltages for the derivation of mains phase current reference values of a three-phase/level/switch pulsewidth-modulated (VIENNA) rectifier system. Furthermore, the concept features low input current ripple amplitude as, e.g., achieved for space-vector modulation, a low amplitude of the third harmonic of the current flowing into the output voltage center point, and a wide range of modulation. The practical realization of the analog control concept as well as experimental results for application with a 5-kW prototype of the pulsewidth-modulated rectifier are presented. Furthermore, a control scheme which relies only on the absolute values of the input phase currents and a modified control scheme which does not require information about the mains phase voltages are presented.     

Agent-Based Approach to Mass-Oriented Production Planning: Case Study

This paper discusses the potential of multiagent planning techniques in the production-planning domain, with special focus on mass-oriented production. The research presented in the paper has been centered around ExPlanTech-a specific implementation of a production-planning multiagent system. Suitability of ExPlanTech for mass-oriented and project-driven manufacturing is also discussed in the paper. Applicability of multiagent concepts is demonstrated on a multiagent planning architecture and production-planning case study at a Skoda Auto Engine Plant     

An adaptive stochastic sequential quadratic programming with differentiable exact augmented lagrangians

Mathematical Programming - We consider solving nonlinear optimization problems with a stochastic objective and deterministic equality constraints. We assume for the objective that its evaluation,...     

Emanations and “induced” radioactivity: From mystery to (mis)use

Radon, Rn; atomic number Z=85; is a (gaseous) chemical element of which no stable but only radioactive isotopes exist. Three of them, namely actinon (²¹⁹Rn), thoron (²²⁰Rn) and radon (²²²Rn) are the decay products of naturally occurring radioisotopes of radium:²²³Ra,²²⁴Ra and²²⁶Ra, respectively. The natural Rn isotopes were discovered within the period 1899–1902 and at that time referred to as emanations because they came out (emanated) of sources/materials containing actinium, thorium and radium, respectively. The (somewhat mysterious) emanations appeared to disintegrate into radioactive decay products which by depositing at solid surfaces gave rise to “induced” radioactivity i.e. radioactive substances with various half-lives. Following the discovery of the emanations the volume of the research involving them and their disintegration products grew steeply. The identity of a number of these radioactive products was soon established. Radium- emanation was soon used as a source of RaD (²¹⁰Pb) to be applied as an “indicator” (radiotracer) for lead in a study on the solubility of lead sulphide and lead chromate. Moreover, radium and its emanation were introduced into the medical practice. Inhaling radon and drinking radon-containing water became an accepted medicinal use (or misuse?) of that gas. Shortly after the turn of the century, the healing (?) action of natural springs (spas) was attributed to their radium emanation i.e. radon. Bathing in radioactive spring water and drinking it became very popular. Even today, bathing in radon-containing water is still a common medical treatment in Jáchymov, Czech Republic.     

Parallel Connection of Two Three-Phase Three-Switch Buck-Type Unity-Power-Factor Rectifier Systems With DC-Link Current Balancing

Connecting three-phase rectifier systems in parallel shows many advantages as compared to a single rectifier system with higher output power, such as higher reliability, smaller current and voltage ripple components, lower filtering effort, or higher system bandwidth. However, current unbalance or circulating currents can occur for modular design. In this paper, the parallel connection of two three-phase three-switch buck-type unity-power-factor pulsewidth-modulation rectifier systems is experimentally investigated for a 10-kW digital-signal-processor-controlled prototype. A space vector modulation scheme is employed showing all the advantages of an interleaved operation. Three control schemes for active dc-link current balancing are described employing an additional free-wheeling state that allows to influence the rate of change of the dc-link currents and can therefore be used for dc-link current balancing. The control schemes differ concerning control action and additional switching losses. Simulation and experimental results confirm the theoretical considerations: The dc-link current-balancing capability of the different control methods is compared, and the influence of the additional free-wheeling state on switching losses and operation behavior is investigated. The most advantageous control method, which employs a hysteresis controller and shows limited switching losses, is selected. The analysis of the mains behavior shows an improvement as compared to a single rectifier operation.     

Vermiculite clay mineral as an effective carbon paste electrode modifier for the preconcentration and voltammetric determination of Hg(II) and Ag(I) ions

A vermiculite modified carbon paste electrode (VMCPE) was employed for the in situ preconcentration of traces of Hg(II) and Ag(I) via an ion-exchange route. Heavy metal ions were accumulated in Britton-Robinson (BR) buffer pH 7 for Hg(II) and pH 6 for Ag(I), and afterwards reduced at –0.7 V vs. Ag/AgCl in the separate measurement solution (BR buffer pH 5 + 0.05 mol/L NaNO₃) prior to the anodic stripping square-wave voltammetric (ASSWV) detection. For Hg(II) ions, at 15 min accumulation, a linear range from 1.0 × 10^–7 to 8.0 × 10^–6 mol/L was obtained, with a 5.7 × 10^–8 mol/L limit of detection. The VMCPE response was linear for Ag(I) ions in the concentration range from 2.0 × 10^–7 to 8.0 × 10^–6 mol/L, at 10 min accumulation with a corresponding limit of detection of 6.3 × 10^–8 mol/L. The relative standard deviation of the analytical procedure including accumulation from a 5 × 10^–7 mol/L solution of Hg (15 min) or Ag(I) (10 min), electrolysis, ASSWV detection, regeneration and activation of the VMCPE, was 4% (n = 6). The optimisation of the parameters for the application of the VMCPE in combination with ASSWV detection is presented and discussed. Received: 10 July 1997 / Revised: 31 October 1997 / Accepted: 3 November 1997     

Semisynthetic 4-O-Methyl-ß-Rhodomycins: Synthesis and Structure-Activity Relationships

ABSTRACT

The synthesis of 7-O-α-L-daunosaminyl-4-O-methyl-β-rhodomycinone (3) and the determination of its cytotoxic potency compared to that of the natural 7-O-α-L-dau-nosaminyl-β-rhodomycinone (4) are described. Starting with natural β-rhodomycinone (7), trimethylsilyl protecting groups were attached to the hydroxy groups at position 7 and 10, and the 4-OH group was subsequently methylated (MeI/Cs₂CO₃), thus providing the 4-O-methyl-7, 10-bis-O-trimethylsilyl-β-rhodomycinone (10). The two TMS groups were then deblocked to give 4-O-methyl-β-rhodomycinone (12). In a 3-stage synthesis 12 was converted into 4-O-methyl-10-O-trifiuoroacetyl-ß-rhodomycinone (15) to which l, 4-bis-O-p-nitrobenzoyl-3-N-trifluoroacetyl-L-daunosamine 16 was selectively linked to afford the 7-O-α-glycoside 17. The acyl protective groups are removed by treatment with 1N NaOH to give 3.     

Vermiculite clay mineral as an effective carbon paste electrode modifier for the preconcentration and voltammetric determination of Hg(II) and Ag(I) ions

A vermiculite modified carbon paste electrode (VMCPE) was employed for the in situ preconcentration of traces of Hg(II) and Ag(I) via an ion-exchange route. Heavy metal ions were accumulated in Britton-Robinson (BR) buffer pH 7 for Hg(II) and pH 6 for Ag(I), and afterwards reduced at –0.7 V vs. Ag/AgCl in the separate measurement solution (BR buffer pH 5 + 0.05 mol/L NaNO₃) prior to the anodic stripping square-wave voltammetric (ASSWV) detection. For Hg(II) ions, at 15 min accumulation, a linear range from 1.0 × 10^–7 to 8.0 × 10^–6 mol/L was obtained, with a 5.7 × 10^–8 mol/L limit of detection. The VMCPE response was linear for Ag(I) ions in the concentration range from 2.0 × 10^–7 to 8.0 × 10^–6 mol/L, at 10 min accumulation with a corresponding limit of detection of 6.3 × 10^–8 mol/L. The relative standard deviation of the analytical procedure including accumulation from a 5 × 10^–7 mol/L solution of Hg (15 min) or Ag(I) (10 min), electrolysis, ASSWV detection, regeneration and activation of the VMCPE, was 4% (n = 6). The optimisation of the parameters for the application of the VMCPE in combination with ASSWV detection is presented and discussed.     

A thermodynamic approach, using speciation studies, towards the evaluation and design of bone-seeking radiopharmaceuticals as illustrated for 117mSn(II)-PEI-MP

Blood plasma modeling has proved effective in the evaluation of clinical observations recorded for baboon and rat tests with ¹⁵³Sm- ethylenediaminetetraphosphonic acid (EDTMP) as well as for ¹⁶⁶Ho-EDTMP. In the search for a cure for metastatic bone cancer, ^117mSn with its conversion electrons of discrete energies shows low bone marrow toxicity, providing the opportunity to increase the administered dose. Selective accumulation in lesions would capitalize on this advantage. The 10-30 kDa fraction of the water-soluble polymer polyethyleneimine, functionalized with methylene phosphonate groups (PEI-MP) and labeled with ^99mTc, has shown selective uptake into bone tumours. This paper relates the speciation of Sn(II)-PEI-MP and other known ^117mSn(II) containing bone-seeking radiopharmaceuticals in blood plasma. Apparent formation constants for the complexation of Sn^II with PEI-MP, DTPA, HEDP and other important blood plasma ligands were measured potentiometrically or estimated by linear free energy relationships (LFER). These data were added to the ECCLES database in order to construct a blood plasma model for Sn^II. From this model it is predicted that Sn^II will remain bound to the polymer (PEI-MP) in blood plasma and therefore, have only slight reticuloendothelial uptake. Preliminary primate studies indeed proved that the complex between Sn^II and PEI-MP remains intact in blood plasma, which is consistent with the observation for PEI-MP labeled with ^99mTc. From these data, it was also possible to explain in retrospect the lower bone uptake, the slow blood clearance and the liver uptake of the agents ^117mSn(II) DTPA and ^117mSn(II) HEDP agents as reported in the literature.