A study of fluorescence properties of citrinin in β-cyclodextrin aqueous solution and different solvents

Citrinin (CIT) is a nephrotoxic mycotoxin initially isolated from filamentous fungus Penicilliu citrinum. It was later isolated from several other species, such as Aspergillus and Monascus. It has a conjugated, planar structure that gives it a natural fluorescence ability, which can be used to develop sensitive methods for detecting CIT in food. In this paper, we used the spectro?uorescence technique to study the effects of pH value, β-cyclodextrin (β-CD) and organic solvents on the CIT fluorescence intensity. The results show that lower pH value, aceitc acid, β-CD and acetonitrile can induce a higher fluorescence intensity of CIT, but methanol or H₂O has a decreasing effect on the fluorescence intensity of CIT. Findings in this study provide a theoretical basis for development of a high sensitivity fluorescence-based trace analysis for CIT detection.     

The Effect of Auxiliary Nitrogenated Linkers on the Design of New Cadmium-Based Coordination Polymers as Sensors for the Detection of Explosive Materials

Three new cadmium-based coordination polymers, denoted [Cd(hfipbb)(4,4’-bipy)] ( CdPF-1 ), [Cd(hfipbb)(2,2’-bipy)] ( CdPF-2 ), and [Cd(hfipbb)(1,10-phen)] ( CdPF-3 ), have been hydrothermally synthesized by using the well-known V-shaped organic linker 4,4’-(hexafluoroisopropylidene)bis(benzoic acid) (H₂hfipbb), together with different nitrogenated auxiliary linkers. Considering the d¹⁰ configuration of the transition metal selected, the luminescent properties for these CdPF-n materials were explored, finding that materials CdPF-2 and CdPF-3 act as excellent sensors in the detection of explosive nitro aromatic compounds. The photoluminescence properties of CdPF-2 and CdPF-3 revealed that significant and sensitive fluorescence quenching was observed toward NP (nitrophenol) for CdPF-2 and PA (picric acid) for CdPF-3 in MeOH suspensions.     

Optimization of Pretreatment Method for Alkylmercuries Speciation in Coal by High‐Performance Liquid Chromatography Coupled with UV‐Digestion Cold Vapor Atomic Fluorescence Spectrometry

Abstract

Exhaustive extraction of analytes in their original chemical forms from samples with complex matrices is a pivotal step for speciation analysis. Herein we propose a pretreatment method for extracting and preconcentrating methylmercury and ethylmercury from coal samples by using KBr–H₂SO₄/CuSO₄–C₆H₅CH₃–Na₂S₂O₃ system. The extraction conditions, including the volume of the organic phase and the extraction time, were optimized in detail. Speciation analysis of alkylmercuries was carried out by high‐performance liquid chromatography online coupled with UV‐digestion and cold vapor atomic fluorescence spectrometry. The detection limits were 0.6 ng mL^?1 for methylmercury and 1 ng mL^?1 for ethylmercury, respectively. The recoveries of methylmercury and ethylmercury spiked in a sample were 84% and 82%, respectively. The method was applied successfully to analysis of alkylmercuries in four coal samples collected from northeast China.     

Design,synthesis and biological evaluation of pyridyl substituted benzoxazepinones as potent and selective inhibitors of aldosterone synthase

Exorbitant aldosterone is closely associated with various severe diseases, including congestive heart failure and chronic kidney disease. As aldosterone synthase is the pivotal enzyme in aldosterone biosynthesis, its inhibition constitutes a promising treatment for these diseases. Via a structure-based approach, a series of pyridyl substituted 3,4-dihydrobenzo[f][1,4]oxazepin-5(2H)-ones were designed as inhibitors of aldosterone synthase. Six compounds (5j, 5l, 5m 5w, 5x and 5y) distinguished themselves with potent inhibition (IC₅₀ <100 nmol/L) and high selectivity over homogenous 11β-hydroxylase. As the most promising compound, 5x exhibited an IC₅₀ of 12 nmol/L and an excellent selectivity factor (SF) of 157, which are both superior to those of the reference fadrazole (IC₅₀ = 21 nmol/L, SF = 7). Importantly, 5x showed no inhibition against steroidogenic CYP17, CYP19 and a panel of hepatic CYP enzymes indicating an outstanding safety profile. As it manifested satisfactory pharmacokinetic properties in rats, compound 5x was considered as a drug candidate for further development.     

Synchronizing Substrate Activation Rates in Multicomponent Reactions with Metal–Organic Framework Catalysts

A study on the influence of the cation coordination number, number of Lewis acid centers, concurrent existence of Lewis base sites, and structure topology on the catalytic activity of six new indium MOFs, has been carried out for multicomponent reactions (MCRs). The new indium polymeric frameworks, namely [In₈(OH)₆(popha)₆(H₂O)₄]?3 H₂O ( InPF‐16 ), [In(popha)(2,2′‐bipy)]?3 H₂O ( InPF‐17 ), [In₃(OH)₃(popha)₂(4,4′‐bipy)]?4 H₂O ( InPF‐18 ), [In₂(popha)₂(4,4′‐bipy)₂]?3 H₂O ( InPF‐19 ), [In(OH)(Hpopha)]?0.5 (1,7‐phen) ( InPF‐20 ), and [In(popha)(1,10‐phen)]?4 H₂O ( InPF‐21 ) (InPF=indium polymeric framework, H₃popha=5‐(4‐carboxy‐2‐nitrophenoxy)isophthalic acid, phen=phenanthroline, bipy=bipyridine), have been hydrothermally obtained by using both conventional heating (CH) and microwave (MW) procedures. These indium frameworks show efficient Lewis acid behavior for the solvent‐free cyanosilylation of carbonyl compounds, the one pot Passerini 3‐component (P‐3CR) and the Ugi 4‐component (U‐4CR) reactions. In addition, InPF‐17 was found to be a highly reactive, recyclable, and environmentally benign catalyst, which allows the efficient synthesis of α‐aminoacyl amides. The relationship between the Lewis base/acid active site and the catalytic performance is explained by the 2D seven‐coordinated indium framework of the catalyst InPF‐17 . This study is an attempt to highlight the main structural and synthetic factors that have to be taken into account when planning a new, effective MOF‐based heterogeneous catalyst for multicomponent reactions.     

A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis

A novel molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization with baicalein (BAI) as the template and used as solid‐phase extraction (SPE) adsorbent, aiming at the affinity isolation and selective knockout of BAI from Scutellaria baicalensis Georgi (SB). We used computational simulation to predict the optimal functional monomer, polymerization solvent and molar ratio of template to functional monomer. Characterization and performance tests revealed that MIP exhibited uniform spherical morphology, rapid binding kinetics, and higher adsorption capacity for BAI compared with nonimprinted polymer (NIP). The application of MIP in SPE coupled with high‐performance liquid chromatography to extract BAI from SB showed excellent recovery (94.3%) and purity (97.0%). Not only the single BAI compound, but also the BAI‐removed SB extract was obtained by one‐step process. This new method is useful for isolation and knockout of key bioactive compounds from herbal medicines. Copyright © 2015 John Wiley & Sons, Ltd.     

Ultra-lightweight cellulose foam material: preparation and properties

Ultra-lightweight cellulose foams were prepared by regeneration of sodium dodecyl sulfate (SDS)/cellulose/NaOH/urea blend solution via mechanical agitation and then freeze-drying. The morphology and properties of the blend solutions and foams were investigated via optical microscope, rheometer, BET and SEM. As a result, it was found that the inclusion complex structure between cellulose macromolecules and the solvent molecules was not destroyed. Moreover, the bubbles were about 20–50 μm in the solutions and larger (>100 μm) in the foams. Not only the micropores (bubbles) but also the nanopores could be observed in the wet and dried foams. The cellulose foams possessed ultra-low density of about 30 mg/cm³ and high specific surface area. The result of X-ray diffraction and Fourier transform infrared spectroscopy indicated that the cellulose foams were transited from cellulose I to cellulose II after dissolution and gelation. Bubbles inside the wet foams weakened the mechanical properties, but inversely increased the mechanical properties in the dried foams. Typical “J”-shaped curves were observed during the mechanical test, which revealed good compressive strength of dried foams. In this work, cellulose foams with ultra-lightweight and good mechanical properties were obtained, which exhibited great potentials for further development and comprehensive utilization of cellulose.