Performance Parameters of ATM Networks with Bursts of Errors

In this paper we present the calculation of the error performance of a point-to-point ATM connection transported on an STS-3c SONET (SDH STM-1) interface. The ATM layer performance parameters calculated are Cell Loss Ratio (CLR), Cell Error Ratio (CER), and Severely Errored Cell Block Ratio (SECBR). Statistics of consecutive errored and lost cells are also calculated for each run of the simulation. The physical layer performance parameters such as Bit Error Ratio (BER), Errored Second Ratio (ESR), and Severely Errored Second Ratio (SESR) are compared with corresponding objective values in G.826. The bursty nature of errors in physical communication channels is described by the Hidden Markov Model (HMM) which is obtained from the experimental data. The importance of using this model is demonstrated by the simulation results. The ATM performance for channels with independent errors differs significantly from the ATM performance for channels with bursts of errors and equal bit error ratios.     

A study on melt grafting of maleic anhydride onto low‐density polyethylene and its blend with polyamide 6

Graft copolymerization of low‐density polyethylene (LDPE) with a maleic anhydride (MAH) was performed using intermeshing corotating twin‐screw extruder in the presence of benzoyl peroxide (BPO). The LDPE/polyamide 6 (PA6) and LDPE‐g‐MAH/PA6 blends were prepared in a corotating twin‐screw extruder. The melt viscosity of the grafted LDPE was measured by a capillary rheometer. The grafted copolymer was characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microcopy (SEM). The influence of the variation in temperature, BPO and MAH concentration, and temperature on the grafting degree and on the melt viscosity was studied. The grafting degree increased appreciably up to about 0.45 phr and then decreased continuously with an increasing BPO concentration. According to the FTIR analysis, it was found that the amount of grafted MAH on the LDPE chains was ～5.1%. Thermal analysis showed that melting temperature of the graft copolymers decreases with increasing grafting degree. In addition to this, loss modulus (E″) of the copolymers first increased little with increasing grafting and then obviously decreased with increasing grafting degree. Furthermore, the results revealed that the tensile strength of the blends increased linearly with increasing PA6 content. The results of SEM and mechanical test showed that the blends have good interfacial adhesion and good stability of the phase structure, which is reflected in the mechanical properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 267–275, 2010     

Asymptotic Bound on the Characteristic Function of Signed Linear Serial Rank Statistics

This work establishes an asymptotic bound on the characteristic function of signed linear serial rank statistics. The result is obtained under rather general conditions including the important case of van der Waerden scores. It generalizes the result of Seoh (1983, Ph.D. Thesis, Department of Mathematics, Indiana University) and constitutes an essential step to the elaboration of Berry-Esséen's bounds and the establishment of Edgeworth expansions. These statistics constitute a natural tool for testing the hypothesis of white noise with a symmetrical (unspecified) distribution in comparison to other alternative hypothesis of serial dependence.     

Ultrafast experiments on intermolecular electron transfer in the benzene - bromine atom charge transfer complex

Ultrafast pump - probe measurements have been made on the benzene - bromine atom charge transfer (CT) complex in CCl₄ and cyclohexane solutions. Ultrafast optical excitation of the CT band of the complex yields an ion pair, which is comprised of a benzene cation and a bromide anion. The rate of charge recombination between the bromide and the benzene cation in the ion pair has been observed to be much faster than the rate of diffusion apart. The charge recombination rate is accelerated at high benzene concentrations as a result of the formation of a benzene dimer cation - bromide ion pair which undergoes much faster charge recombination than the benzene cation - bromide ion pair.     

Analytic method for solving coupled nonlinear Schroedinger equations with oscillating terms describing polarized soliton oscillations

Using a variational method, a new model of the nonlinear propagation of optical solitons generated from semiconductor lasers through lossy elliptically low birefringent fiber, is presented within the framework of a system of coupled nonlinear Schroedinger (CNLS) equations with oscillating terms. This analytic model demonstrates polarized soliton oscillations in a lossy elliptically low birefringent optical fiber.     

On the structure ofn-point sets

Letn be an integer greater than one. Our main result, called the “Structure Theorem” is that a set that containsn−1 disjoint continua that are cut by a single line cannot be ann-point set, that is, a set that meets every line in preciselyn points. This theorem unifies and significantly improves upon a number of known theorems. The second part of the paper is devoted to several theorems that address the question when a set that meets every line in at mostn points can be extended to ann-point set. These theorems also highlight the sharpness of the Structure Theorem.     

Landau damping of ion-acoustic waves with simultaneous effects of non-extensivity and non-thermality in the presence of hybrid Cairns-Tsallis distributed electrons

The dispersion properties and Landau damping rate of ion-acoustic waves (IAWs) with the hybrid Cairns-Tsallis distributed (CTD) electrons and Maxwellian ions are investigated using the plasma kinetic model based on Vlasov-Poisson's equations. For both super-extensive (q < 1) and sub-extensive (q > 1) plasmas, the dielectric response function, real frequency, and Landau damping rate of IAWs are derived. By taking the effect of θ_{i, e} (ion-to-electron temperature ratio) into account, it is found that with the increase of ion temperature, the real frequency and wave dispersion effects increase as well (for both super-extensive and sub-extensive cases). Exploring the properties of the Landau damping rate of IAWs with the simultaneous presence of non-thermal parameter α and non-extensive parameter q, a comparison of numerical and analytical results is presented. It is found that in different ranges of θ_{e, i} (electron-to-ion temperature ratio), on decreasing the values of the non-extensive parameter and increasing values of the non-thermal parameter, the weak damping rate is observed (vice versa) in super-extensive or super-thermal plasma, although the trend of the damping rate in sub-thermal plasma is similar (as in the case of super-thermal plasma) but is less weak. It is further revealed that the damping rate of IAWs in thermal plasmas (Maxwellian) is stronger than the damping rate of IAWs in the case of non-thermal plasmas (CTD). The current study is applicable to provide deep insight and further allow the exploration of electrostatic plasma modes in different space and laboratory plasma environments where the hybrid CTD plasma exists.     

A real-time monitoring approach for bivariate event data

Early detection of changes in the frequency of events is an important task in many fields, such as disease surveillance, monitoring of high-quality processes, reliability monitoring, and public health. This article focuses on detecting changes in multivariate event data by monitoring the time-between-events (TBE). Existing multivariate TBE charts are limited because they only signal after an event occurred for each of the individual processes. This results in delays (i.e., long time-to-signal), especially when we are interested in detecting a change in one or a few processes with different rates. We propose a bivariate TBE chart, which can signal in real-time. We derive analytical expressions for the control limits and average time-to-signal performance, conduct a performance evaluation and compare our chart to an existing method. Our findings showed that our method is an effective approach for monitoring bivariate TBE data and has better detection ability than the existing method under transient shifts and is more generally applicable. A significant benefit of our method is that it signals in real-time and that the control limits are based on analytical expressions. The proposed method is implemented on two real-life datasets from reliability and health surveillance.