Determination of phthalate esters in bottled water using dispersive liquid–liquid microextraction coupled with GC–MS

Dispersive liquid–liquid microextraction method was developed for the determination of the amount of phthalate esters in bottled drinking water samples and dispersive liquid–liquid microextraction samples were analyzed by GC–MS. Various experimental conditions influencing the extraction were optimized. Under the optimized conditions, very good linearity was observed for all analytes in a range between 0.05 and 150 μg/L with coefficient of determination (R²) between 0.995 and 0.999. The LODs based on S/N = 3 were 0.005–0.22 μg/L. The reproducibility of dispersive liquid–liquid microextraction was evaluated. The RSDs were 1.3–5.2% (n = 3). The concentrations of phthalates were determined in bottled samples available in half shell. To understand the leaching profile of these phthalates from bottled water, bottles were exposed to direct sunlight during summer (temperature from 34–57°C) and sampled at different intervals. Result showed that the proposed dispersive liquid–liquid microextraction is suitable for rapid determination of phthalates in bottled water and di‐n‐butyl, butyl benzyl, and bis‐2‐ethylhexyl phthalate compounds leaching from bottles up to 36 h. Thereafter, degradation of phthalates was observed.     

Evaluation of Antimicrobial Activity of Some Newly Synthesized 4‐Thiazolidinones

The antimicrobial activity of thirteen newly synthesized 4‐thiazolidinones (TZONs) and four dithiolane derivatives was assessed against susceptible and resistant bacteria, including MRSA, as well as Candida albicans. The structure‐activity relationships revealed that 4‐Thiazolidinone derivatives harboring p‐chlorophenyl and dicarboxyethyl at the 2‐ethenyl and 5‐arylidine positions of the thiazolidinone ring display considerable antibacterial properties. No antifungal activity was recorded by all tested compounds against Candida albicans. The possible potentiative (synergistic) effect of the most active compounds to a few commercial antibiotics was also investigated.     

Evaluation of Antifungal and Antioxidant Activity of Newly Synthesized 4‐Thiazolidinones

The antifungal and antioxidant activities of thirty newly synthesized 4‐thiazolidinone (TZON) derivatives were assessed against some fungal species including Candida albicans and Aspergillus niger. The introduction of different arylidene moieties at 5‐positions of the thiazolidinone ring successfully enhanced its biological activity. The structure–activity relationships revealed that 4‐thiazolidinone derivatives harboring dicarboxyethyl (at the 2‐ethenyl) and p‐nitrophenylhydrazyl arm (at the 5‐arylidine positions of the thiazolidinone ring) display considerable antifungal and antioxidant properties.     

Mutation scanning analysis of genetic variation within and among Echinococcus species: Implications and future prospects

Adult tapeworms of the genus Echinococcus (family Taeniidae) occur in the small intestines of carnivorous definitive hosts and are transmitted to particular intermediate mammalian hosts, in which they develop as fluid‐filled larvae (cysts) in internal organs (usually lung and liver), causing the disease echinococcosis. Echinococcus species are of major medical importance and also cause losses to the meat and livestock industries, mainly due to the condemnation of infected offal. Decisions regarding the treatment and control of echinococcosis rely on the accurate identification of species and population variants (strains). Conventional, phenetic methods for specific identification have some significant limitations. Despite advances in the development of molecular tools, there has been limited application of mutation scanning methods to species of Echinococcus. Here, we briefly review key genetic markers used for the identification of Echinococcus species and techniques for the analysis of genetic variation within and among populations, and the diagnosis of echinococcosis. We also discuss the benefits of utilizing mutation scanning approaches to elucidate the population genetics and epidemiology of Echinococcus species. These benefits are likely to become more evident following the complete characterization of the genomes of E. granulosus and E. multilocularis.     

Interaction of Metal–Dipeptide Complex with Ninhydrin in the Absence and Presence of Conventional CTAB Surfactant

The present work is aimed at studying the interaction between copper-glycyltyrosine [(Cu(II)-Gly-Tyr)]⁺ and ninhydrin in water and in micelles formed by cetyltrimethylammonium bromide (CTAB) using spectrophometric measurements at 80°C and pH 5.0. The order of reaction remains the same in the two systems, that is, first- and fractional-order kinetics with respect to [Cu(II)-Gly-Tyr]⁺ and [ninhydrin], respectively, in the excess of ninhydrin over [Cu(II)-Gly-Tyr]⁺. It was observed that the product formed is same in both the media. The reaction is catalyzed by CTAB, and the maximum rate enhancement is about three fold. Quantitative kinetic analysis of k_ψ–[CTAB] data was explained in terms of pseudo-phase of the micelles (assuming the association/incorporation of both the reactants at the micellar surface).     

Flow-injection determination of total iron in freshwater samples with neutralisation chemiluminescence

A flow-injection chemiluminescence method has been established for the determination of total iron in freshwater samples. The enhanced chemiluminescence emission was caused by the iron(II) from the neutralisation reaction of hydrochloric acid and sodium hydroxide without the use of any chemiluminescent reagent. The calibration graph was linear in the concentration range of 2.8–560 µg L^?1 (r ² = 0.9983, n = 8), with relative standard deviation (RSD; n = 4) in the range of 0.8–2.6%. The limit of detection (S/N = 3) was 0.56 µg L^?1 with injection throughput of 180 h^?1. The effect of common anions and cations were studied over their environmentally relevant concentrations in freshwaters. The method was successfully applied to determine total iron in freshwater samples. Iron(III) was reduced to iron(II) by using hydroxylammonium chloride. The proposed method was compared with spectrophotometric method and there was no significant difference between the two methods at the 95% confidence level (t-test). Analysis of river water (certified reference material SLRS-4) for iron(II), after reduction of iron(III) with hydroxylammonium chloride, gave good results (2.17 ± 0.22 µM compared with the certificate value of 1.85 ± 0.1 µM).     

Determination of phosphate in freshwater samples by flow-injection with lucigenin chemiluminescence

Lucigenin chemiluminescence (CL) in conjunction with flow-injection analysis (FIA) is used for the determination of phosphate in freshwater samples. The procedure is based on the formation of molybdophosphoric heteropoly acid (MoP–HPA) by the reaction of phosphate and ammonium molybdate under acidic conditions. CL emission was observed as a result of oxidation of lucigenin in aqueous sodium hydroxide solution in the presence of MoP–HPA. Calibration was linear up to 500?µg?L^?1 (r ^2?=?0.9998; n?=?8), with a detection limit (S/N?=?3) of 0.95?µg?L^?1. An injection throughput of 120 h^?1, and relative standard deviation (RSD; n?=?4) of 1.3–3.2% were achieved in the concentration range studied. An on-line chelating column was used to remove interfering cations. The method was applied to freshwater samples, and the results (51?±?1.0 – 107?±?2.0?µg?L^?1) did not differ significantly from results obtained using a spectrophotometric method (52.5?±?1.0 – 102?±?2.0?µg?L^?1) at 95% confidence level (t-test).     

Assessment of the polluting effects of the Iponri-Alaka Canal,Lagos State,Nigeria

ABSTRACT

The polluting effects of Iponri-Alaka Canal in Surulere area of Lagos State on the environment have been studied using six sampling points. The study aimed at assessing the effects of exposure to pollutants on humans and other life forms. The quality of air, wastewater and sediments was assessed between March and August 2017. The concentrations of SO₂ and H₂S were measured using MSA Altair 5X. Temperature, pH and DO were measured in-situ using Thermometer, pH meter and Winkler method, respectively. TSS, TDS, TS, TA, TH, BOD, chloride Cl^?, PO₄^3-, SO₄^2- and NO₃^? were determined using appropriate standard methods in the laboratory. EC and some heavy metals (Cr, Pb, Mn, Cd and Ni) concentrations were determined using conductivity meter and Atomic Absorption Spectroscopy, respectively. The results showed that pH, TS, DO and TH were well within the WHO and FEPA maximum limits. EC, SO₄^2- and TDS were observed to be higher than guideline values only at one sampling point. The TSS, BOD, TA, NO₃^? and PO₄^3- were higher than WHO and FEPA guideline limits at all sampling points. Cr was seen to be within, while Pb and Mn were higher than WHO and FEPA guideline values. Cd was higher than guideline values only at two sampling points. Ni was below detection concentration at all the sampling points.

The concentration of SO₂ was seen to be higher than WHO and NESREA guideline values at two sampling points, while H₂S concentration was higher than WHO limit at all the six sampling points.     

Solid‐State Structural Transformations and Photoreactivity of 1D‐Ladder Coordination Polymers of PbII

An attempt has been made to design double‐stranded ladder‐like coordination polymers (CPs) of hemidirected Pb^II. Four CPs, [Pb(μ‐bpe)(O₂C‐C₆H₅)₂] ? 2H₂O ( 1 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐C₆H₅)₂(O₂C‐C₆H₅)₂] ( 2 ), [Pb₂(μ‐bpe)₂(μ‐O₂C‐p‐Tol)₂(O₂C‐p‐Tol)₂] ? 1.5 H₂O ( 3 ) and [Pb₂(μ‐bpe)₂(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 4 ) (bpe=1,2‐bis(4′‐pyridyl)ethylene), have been synthesised and investigated for their solid‐state photoreactivity. CPs 2 – 4 , having a parallel orientation of bpe molecules in their ladder structures and being bridged by carboxylates, were found to be photoreactive, whereas CP 1 is a linear one‐dimensional (1D) CP with guest water molecules aggregating to form a hydrogen‐bonded 1D structure. The linear strands of 1 were found to pair up upon eliminating lattice water molecules by heating, which led to the solid‐state structural transformation of photostable linear 1D CP 1 into photoreactive ladder CP 2 . In the construction of the double‐stranded ladder‐like structures, the parallel alignment of C?C bonds in 2 – 4 is dictated by the chelating and μ₂‐η²:η¹ bridging modes of the benzoate and toluate ligands. The role of solvents in the formation of such double‐stranded ladder‐like structures has also been investigated. A single‐crystal‐to‐single‐crystal transformation occurred when 4 was irradiated under UV light to form [Pb₂(rctt‐tpcb)(μ‐O₂C‐m‐Tol)₂(O₂C‐m‐Tol)₂] ( 5 ).