Trichothiazole A,a dichlorinated polyketide containing an embedded thiazole isolated from Trichodesmium blooms

Mass spectrometry-guided isolation of the lipophilic extract of Trichodesmium bloom material led to the isolation and structure characterization of a new thiazole-containing di-chlorinated polyketide (1). The structure of 1 was deduced using 1D and 2D NMR analysis, high-resolution mass spectrometry analysis and complementary spectroscopic procedures. Trichothiazole A possesses interesting structural features, such as a terminal alkyne, two vinyl chlorides and a 2,4-disubstituted thiazole. Trichothiazole A showed moderate cytotoxicity to Neuro-2 A cells (EC₅₀: 13.3 ± 1.1 μM).     

Characterization of high‐aspect‐ratio periodic structures by X‐ray photoelectron spectroscopy

X‐ray photoelectron spectroscopy (XPS) is a powerful surface characterization technique often relied on for quantification of surface species and coverages. Investigation of silicon microrods, considered a model for high‐aspect‐ratio structures, at different angles with respect to substrate normal was determined to have a significant impact on the relative sensitivity of surface‐bound species on rods relative to the base substrate. Comparison between planar silicon and microrod arrays demonstrates that the angular dependence is complicated and that careful studies must optimize conditions to differentiate between surfaces. In addition, the use of reverse angle resolved XPS, where the substrate is turned away from the X‐ray source, is shown to assist in simplifying the spectrum by removing underlying signal from the substrate near the base. Copyright © 2016 John Wiley & Sons, Ltd.     

Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis

This article examines the substrate/coating interface of a coating deposited onto mild steel and stainless steel substrates using an ambient temperature blast coating technique known as CoBlast. The process uses a coincident stream of an abrasive blast medium and coating medium particles to modify the substrate surface. The hypothesis for the high bond strength is that the abrasive medium roughens the surface while simultaneously disrupting the passivating oxide layer of the substrate, thereby exposing the reactive metal that then reacts with the coating medium. The aim of this study is to provide greater insight into the coating/substrate bonding mechanism by analysing the interface between a hydroxyapatite coating on both mild and stainless steel substrates. The coating adhesion was measured via a tensile test, and bond strengths of approximately 45 MPa were measured. The substrate/coating interface was examined using transmission electron microscopy and selected area diffraction. The analysis of the substrate/coating interface revealed the presence of ultrafine grains in both the coating and substrate at interface associated with deformation at the interface caused by particle impaction during deposition. The chemical reactivity resulting from the creation of these ultrafine grains is proposed to explain the high adhesive strength of CoBlast coatings.     

Validation of a Monte Carlo HPGe detector model against irradiated foil gamma-ray spectroscopy measurements

In order to separate and pre-concentrate uranium from aqueous phase, a novel silica-based adsorbent was prepared by impregnating nalidixic acid (HNA) into a macroreticular silica/polymer composite support (SiO₂-P) with a mean diameter of 60 μm. Adsorption behavior of uranium from aqueous solution onto the adsorbent was studied. Experimental results indicated that HNA/SiO₂-P showed strong adsorption for uranium in a wide range of pH from 3.5 to 10.0, and the maximum adsorption capacity was 35.4 mg g⁻¹. In addition, HNA/SiO₂-P exhibited good selectivity for U(VI) and showed weak or bare adsorption affinity to foreign ions. Kinetic and isotherm of uranium adsorption were in accordance with the pseudo-second-order kinetic model and Langmuir isotherm adsorption model, respectively. Moreover, U(VI) sorption was found to be an endothermic reaction and spontaneous under experimental state. The synthesized adsorbent showed an admirable stability at lower pH values in aqueous solution.

     

Effective elasticity tensor of a periodic composite

The effective elasticity tensor of a composite is defined to be the four-tensor C which relates the average stress to the average strain. We determine it for an array of rigid spheres centered on the points of a periodic lattice in a homogeneous isotropic elastic medium. We first express C in terms of the traction exerted on a single sphere by the medium, and then derive an integral equation for this traction. We solve this equation numerically for simple, body-centered and face-centered cubic lattices with inclusion concentrations up to 90% of the close-packing concentration. For lattices with cubic symmetry the effective elasticity tensor involves just three parameters, which we compute from the solution for the traction. We obtain approximate asymptotic formulas for low concentrations which agree well with the numerical results. We also derive asymptotic results for C at high inclusion concentrations for arbitrary lattice geometries. We find them to be in good agreement with the numerical results for cubic lattices. For low and moderate concentrations the approximate results of Nemat-Nasseret al., also agree well with the numerical results for cubic lattices.     

A 93Nb Solid‐State NMR and Density Functional Theory Study of Four‐ and Six‐Coordinate Niobate Systems

A variable B₀ field static (broadline) NMR study of a large suite of niobate materials has enabled the elucidation of high‐precision measurement of ⁹³Nb NMR interaction parameters such as the isotropic chemical shift (δ_iso), quadrupole coupling constant and asymmetry parameter (C_Q and η_Q), chemical shift span/anisotropy and skew/asymmetry (Ω/Δδ and κ/η_δ) and Euler angles (α, β, γ) describing the relative orientation of the quadrupolar and chemical shift tensorial frames. These measurements have been augmented with ab initio DFT calculations by using WIEN2k and NMR‐CASTEP codes, which corroborate these reported values. Unlike previous assertions made about the inability to detect CSA (chemical shift anisotropy) contributions from Nb^V in most oxo environments, this study emphasises that a thorough variable B₀ approach coupled with the VOCS (variable offset cumulative spectroscopy) technique for the acquisition of undistorted broad (?1/2?+1/2) central transition resonances facilitates the unambiguous observation of both quadrupolar and CSA contributions within these ⁹³Nb broadline data. These measurements reveal that the ⁹³Nb electric field gradient tensor is a particularly sensitive measure of the immediate and extended environments of the Nb^V positions, with C_Q values in the 0 to >80 MHz range being measured; similarly, the δ_iso (covering an approximately 250 ppm range) and Ω values (covering a 0 to approximately 800 ppm range) characteristic of these niobate systems are also sensitive to structural disposition. However, their systematic rationalisation in terms of the Nb? O bond angles and distances defining the immediate Nb^V oxo environment is complicated by longer‐range influences that usually involve other heavy elements comprising the structure. It has also been established in this study that the best computational method(s) of analysis for the ⁹³Nb NMR interaction parameters generated here are the all‐electron WIEN2k and the gauge included projector augmented wave (GIPAW) NMR‐CASTEP DFT approaches, which account for the short‐ and long‐range symmetries, periodicities and interaction‐potential characteristics for all elements (and particularly the heavy elements) in comparison with Gaussian 03 methods, which focus on terminated portions of the total structure.     

Dynamic Supramolecular Polymers Based on Benzene‐1,3,5‐tricarboxamides: The Influence of Amide Connectivity on Aggregate Stability and Amplification of Chirality

N‐Centred benzene‐1,3,5‐tricarboxamides (N‐BTAs) composed of chiral and achiral alkyl substituents were synthesised and their solid‐state behaviour and self‐assembly in dilute alkane solutions were investigated. A combination of differential scanning calorimetry (DSC), polarisation optical microscopy (POM) and X‐ray diffraction revealed that the chiral N‐BTA derivatives with branched 3,7‐dimethyloctanoyl chains were liquid crystalline and the mesophase was assigned as Col_ho. In contrast, N‐BTA derivatives with linear tetradecanoyl or octanoyl chains lacked a mesophase and were obtained as crystalline compounds. Variable‐temperature infrared spectroscopy showed the presence of threefold, intermolecular hydrogen bonding between neighbouring molecules in the mesophase of the chiral N‐BTAs. In the crystalline state at room temperature a more complicated packing between the molecules was observed. Ultraviolet and circular dichroism spectroscopy on dilute solutions of N‐BTAs revealed a cooperative self‐assembly behaviour of the N‐BTA molecules into supramolecular polymers with preferred helicity when chiral alkyl chains were present. Both the sergeants‐and‐soldiers as well as the majority‐rules principles were operative in stacks of N‐BTAs. In fact, the self‐assembly of N‐BTAs resembles closely that of their carbonyl (C?O)‐centred counterparts, with the exception that aggregation is weaker and amplification of chirality is less pronounced. The differences in the self‐assembly of N‐ and C?O‐BTAs were analysed by density functional theory (DFT) calculations. These reveal a substantially lower interaction energy between the monomeric units in the supramolecular polymers of N‐BTAs. The lower interaction energy is due to the higher energy penalty for rotation around the Ph? NH bond compared to the Ph? CO bond and the diminished magnitude of dipole–dipole interactions. Finally, we observed that mixed stacks are formed in dilute solution when mixing N‐BTAs and C?O BTAs.     

A Time‐Resolved Spectroscopic Study of the Bichromophoric Phototrigger 3′,5′‐Dimethoxybenzoin Diethyl Phosphate: Interaction Between the Two Chromophores Determines the Reaction Pathway

3′,5′‐Dimethoxybenzoin (DMB) is a bichromophoric system that has widespread application as a highly efficient photoremovable protecting group (PRPG) for the release of diverse functional groups. The photodeprotection of DMB phototriggers is remarkably clean, and is accompanied by the formation of a biologically benign cyclization product, 3′,5′‐dimethoxybenzofuran (DMBF). The underlying mechanism of the DMB deprotection and cyclization has, however, until now remained unclear. Femtosecond transient absorption (fs‐TA) spectroscopy and nanosecond time‐resolved resonance Raman (ns‐TR³) spectroscopy were employed to detect the transient species directly, and examine the dynamic transformations involved in the primary photoreactions for DMB diethyl phosphate (DMBDP) in acetonitrile (CH₃CN). To assess the electronic character and the role played by the individual sub‐chromophore, that is, the benzoyl, and the di‐meta‐methoxybenzylic moieties, for the DMBDP deprotection, comparative fs‐TA measurements were also carried out for the reference compounds diethyl phosphate acetophenone (DPAP), and 3′,5′‐dimethoxybenzylic diethyl phosphate (DMBnDP) in the same solvent. Comparison of the fs‐TA spectra reveals that the photoexcited DMBDP exhibits distinctly different spectral character and dynamic evolution from those of the reference compounds. This fact, combined with the related steady‐state spectral and density functional theoretical results, strongly suggests the presence in DMBDP of a significant interaction between the two sub‐chromophores, and that this interaction plays a governing role in determining the nature of the photoexcitation and the reaction channel of the subsequent photophysical and photochemical transformations. The ns‐TR³ results and their correlation with the fs‐TA spectra and dynamics provide evidence for a novel concerted deprotection–cyclization mechanism for DMBDP in CH₃CN. By monitoring the direct generation of the transient DMBF product, the cyclization time constant was determined unequivocally to be ≈1 ns. This indicates that there is little relevance for the long‐lived intermediates (>10 ns) in giving the DMBF product, and excludes the stepwise mechanism proposed in the literature as the major pathway for the DMB cyclization reaction. This work provides important new insights into the origin of the 3′,5′‐dimethoxy substitution effect for the DMB photodeprotection. It also helps to clarify the many different views presented in previous mechanistic studies of the DMB PRPGs. In addition to this, our fs‐TA results on the reference compound DMBnDP in CH₃CN provide the first direct observation (to the best of our knowledge) showing the predominance of a prompt (≈2 ps) heterolytic bond cleavage after photoexcitation of meta‐methoxybenzylic compounds. This provides insight into the long‐term controversies about the photoinitiated dissociation mode of related substituted benzylic compounds.     

Regio- and enantioselective intermolecular hydroacylation: substrate-directed addition of salicylaldehydes to homoallylic sulfides

We report a Rh-catalyzed, regio- and enantioselective intermolecular olefin hydroacylation under mild conditions. Hydroacylations between homoallylic sulfides, containing a substrate-bound directing group, and salicylaldehyde derivatives occur in the presence of a spiro-phosphoramidite ligand, (R)-SIPHOS-PE, to give α-branched ketones in >20:1 selectivity and up to 97% ee. Our conditions are also applicable to the asymmetric intermolecular hydroacylation of 1,2-disubstituted olefins.