Characteristics of sulfur response in a micro-flame photometric detector

A recently reported micro-flame photometric detector (microFPD) has been examined in greater detail for its sulfur response characteristics. While supporting an "upside down" flame on a stainless steel capillary burner (delivering oxygen) in a counter flowing stream of premixed hydrogen and oxygen, the extremely small flame of the muFPD (30 nL) was observed to produce linear sulfur emission as HSO(*). In this mode, linear sulfur response was obtained over four orders of magnitude with a minimum detectable flow of 2 x 10(-10) g S/s. Additionally, a broad series of sulfur compounds ranging in chemical structure were examined in the microFPD in order to determine the extent of equimolarity and reproducibility of response toward this element. Results of exploring both the linear (HSO(*)) and quadratic (S(2)(*)) modes indicate that the %RSD and equimolarity of sulfur response are comparable between that of the microFPD and a conventional flame photometric detector (FPD).     

Improved method for the determination of zinc pyrithione in environmental water samples incorporating on-line extraction and preconcentration coupled with liquid chromatography atmospheric pressure chemical ionisation mass spectrometry

A method has been developed for the determination of zinc pyrithione (ZnPT) in environmental water samples using monolithic reversed-phase silica columns for rapid on-line large volume solid phase extraction in tandem with on-line matrix removal using sacrificial strong anion exchange (SAX) columns. This is coupled with reversed-phase liquid chromatography with atmospheric pressure chemical ionisation mass spectrometric detection. Limits of detection in spiked river water samples, using a 200 mL preconcentration volume, were determined as 18 ng L(-1), with a limit of quantitation of 62 ng L(-1). The percentage recovery from spiked river water was found to be 72+/-9 (n=3 extractions), whilst overall method precision, following 10 repeat complete analyses was found to be 27% RSD at 1 microg L(-1). Linearity was determined over the concentration range of 0.25-10 microg L(-1) and the calculated regression coefficient was R(2)=0.9802. The method was used to investigate the environmental fate of zinc pyrithione in waters and its partition coefficient between sediment and water phases.     

Elastic light scattering from nanoparticles by monochromatic vacuum-ultraviolet radiation

Elastic light scattering is reported using monochromatic vacuum-ultraviolet radiation to study free, spherical silica nanoparticles prepared by approaches from colloidal chemistry, with diameters between 100 and 240 nm. The colloidal nanoparticles of defined size are transferred from an aqueous solution into the gas phase using a particle beam experiment. After focusing of the particle beam by an aerodynamic lens, the scattered light from monochromatic synchrotron radiation is measured. Angle-resolved elastically scattered light is detected, showing a strong forward-scattering component. Additional evidence for the detection of elastically scattered light comes from plotting the scattered light intensity as a function of the dimensionless parameter qR, where q is the magnitude of the scattering wave vector and R is the particle radius. This yields different power-law regimes that are assigned to scattering from the surface and the bulk of the nanoparticles. Furthermore, there is evidence for modulations in the scattered light intensity as a function of scattering angle, which is clearly distinguished from the forward-scattering component. The experimental results are compared to Mie scattering simulations for isolated particles, yielding general agreement with the experimental results. Deviations from Mie simulations are observed for samples consisting of significant amounts of aggregates. The present results indicate that the optical properties of free nanoparticles are sensitively probed by vacuum-ultraviolet radiation.     

Photochemical functionalization of gallium nitride thin films with molecular and biomolecular layers

We demonstrate that photochemical functionalization can be used to functionalize and photopattern the surface of gallium nitride crystalline thin films with well-defined molecular and biomolecular layers. GaN(0001) surfaces exposed to a hydrogen plasma will react with organic molecules bearing an alkene (C=C) group when illuminated with 254 nm light. Using a bifunctional molecule with an alkene group at one end and a protected amine group at the other, this process can be used to link the alkene group to the surface, leaving the protected amine exposed. Using a simple contact mask, we demonstrate the ability to directly pattern the spatial distribution of these protected amine groups on the surface with a lateral resolution of <12 mum. After deprotection of the amines, single-stranded DNA oligonucleotides were linked to the surface using a bifunctional cross-linker. Measurements using fluorescently labeled complementary and noncomplementary sequences show that the DNA-modified GaN surfaces exhibit excellent selectivity, while repeated cycles of hybridization and denaturation in urea show good stability. These results demonstrate that photochemical functionalization can be used as an attractive starting point for interfacing molecular and biomolecular systems with GaN and other compound semiconductors.     

Condensation on ultrahydrophobic surfaces and its effect on droplet mobility: ultrahydrophobic surfaces are not always water repellant

The condensation of water was studied on topography-based ultrahydrophobic surfaces containing hydrophobized silicon pillars. Optical microscopy showed that water nucleated and grew both on top of and between the pillars. As condensation progressed, water between the pillars became unstable and was forced upward to the surface. Macroscopic water droplets on top of the pillars coalesced with condensed water that remained between the pillars, pinning the droplets at their three-phase contact line. Dynamic contact angle measurements on ultrahydrophobic surfaces wet with condensation revealed a dramatic increase in hysteresis compared to that on dry surfaces, leading to a corresponding decrease in water drop mobility.     

Comparison of the signaling and stability of electrochemical DNA sensors fabricated from 6- or 11-carbon self-assembled monolayers

We have characterized the solution-phase and dry storage stability of electrochemical E-DNA sensors fabricated using mixed self-assembled monolayers (SAMs) composed of 6- or 11-carbon (C6 and C11, respectively) alpha,omega-thiol alcohols and the analogous C6- or C11-thiol-terminated stem-loop DNA probe. We find that the solution-phase and dry storage stability of C6-based E-DNA sensors are limited and poorly reproducible. The use of stabilizing agents bovine serum albumin plus either glucose or trehalose significantly improves the dry storage shelf life of such sensors: when using these preservatives, we observe only 7-9% sensor degradation after 1 month of storage in air at room temperature. In comparison, the stability of C11-based E-DNA sensors is significantly greater than that of the C6-based sensors; we observe only minor (5-8%) loss of signal upon storing these sensors for a week under ambient solution conditions or for more than a month in air in the presence of preservatives. Moreover, whereas the electron-transfer rate through C11 SAMs is slower than that observed for C6 SAMs, it is rapid enough to support good sensor performance. It thus appears that C11 SAMs provide a reasonable compromise between electron-transfer efficiency and sensor stability and are well suited for use in electronic DNA-sensing applications.     

Heterovalent selectivity and the combinatorial advantage

Libraries of monovalent compounds can be reacted with each other to give libraries of bivalent ones. If those reactions are efficient, and if the products do not need to be purified, large numbers of bivalent compounds can be produced rapidly, and one might say there is a "combinatorial advantage" to doing so. However, selective formation of heterobivalent products must be possible otherwise statistical mixtures will form. This tutorial review describes methods that will give heterobivalent compounds almost exclusively. Although there are relatively few methods that will give that desired selectivity, such methods are becoming increasingly important as the potential applications of bi- and multivalent compounds emerge.     

Stable photogenerated carriers in magnetic semiconductor nanocrystals

We report the preparation and investigation of charged colloidal Co2+:ZnO and Mn2+:ZnO nanocrystals. Although both charged and magnetically doped colloidal semiconductor nanocrystals have been reported previously, colloidal charged and magnetically doped semiconductor nanocrystals as described herein have not. Conduction band electrons were introduced into colloidal ZnO diluted magnetic semiconductor (DMS) nanocrystals photochemically, and the resulting TM2+-e-CB interactions were observed by electron paramagnetic resonance spectroscopy (TM2+ = Co2+ or Mn2+). This new motif of colloidal charged magnetic semiconductor nanocrystals reveals attractive new opportunities for studying spin effects in DMS nanostructures relevant to proposed spintronics technologies.     

The impact of the pi-electron conjugation length on the three-photon absorption cross section of fluorene derivatives

The three-photon absorption cross sections of three different fluorene derivatives, with extended pi-electron conjugation lengths was experimentally measured and compared with shorter pi-electron conjugation length analogs. The effect of the conjugation length on the three-photon absorption cross section sigma(3) (') of this family of molecules has been elucidated. It is demonstrated that sigma(3) (') of the asymmetric compound D-pi-pi-pi-A is 6.6 times larger than its shorter configuration D-pi-A, while for the symmetric compounds D-pi-pi-pi-D and A-pi-pi-pi-A a two-fold enhancement was found relative to their shorter conjugation length analogs. Measurements of the three-photon excitation of these compounds in THF solution (10(-3)M) were accomplished with a tunable optical pulse generation pumped by a 25 ps Nd-YAG laser.     

Targeting glycosylation pathways and the cell cycle: sugar-dependent activity of butyrate-carbohydrate cancer prodrugs

Short-chain fatty acid (SCFA)-carbohydrate hybrid molecules that target both histone deacetylation and glycosylation pathways to achieve sugar-dependent activity against cancer cells are described in this article. Specifically, n-butyrate esters of N-acetyl-D-mannosamine (But4ManNAc, 1) induced apoptosis, whereas corresponding N-acetyl-D-glucosamine (But4GlcNAc, 2), D-mannose (But5Man, 3), or glycerol (tributryin, 4) derivatives only provided transient cell cycle arrest. Western blots, reporter gene assays, and cell cycle analysis established that n-butyrate, when delivered to cells via any carbohydrate scaffold, functioned as a histone deacetylase inhibitor (HDACi), upregulated p21WAF1/Cip1 expression, and inhibited proliferation. However, only 1, a compound that primed sialic acid biosynthesis and modulated the expression of a different set of genes compared to 3, ultimately killed the cells. These results demonstrate that the biological activity of butyrate can be tuned by sugars to improve its anticancer properties.