A generic method to detect electrophilic intermediates using isotopic pattern triggered data-dependent high-resolution accurate mass spectrometry

A need still exists for a liquid chromatography/tandem mass spectrometry (LC/MS/MS) method that can detect broad classes of glutathione (GSH) conjugates and provide characterization of their structures. We now describe the development of a method that multiplexes high-resolution accurate mass analysis with isotope pattern triggered data-dependent product ion scans, for simultaneous detection and structural elucidation of GSH conjugates within a single analysis using a LTQ/Orbitrap. This method was initially developed to detect GSH conjugates generated from incubating 10 microM test compound with pooled human liver microsomes fortified with NADPH-regenerating system and a 2:1 ratio of 5 mM glutathione and [(13)C(2) (15)N-Gly]glutathione. The GSH conjugates were detected by isotope search of mass defect filtered and control subtracted full scan accurate MS data using MetWorks software. This was followed by elucidation of reactive intermediate structures using chemical formulae for both protonated molecules and their product ions from accurate masses in a single analysis. The mass accuracies measured for the precursor and product ions by the Orbitrap were <2 ppm in external mass calibration mode. Successful detection and characterization of GSH conjugates of acetaminophen, tienilic acid, clozapine, ticlopidine and mifepristone validated this method. In each case, the detected GSH conjugates were within the top five hits by isotope search. This method also has a broader detection capability since it is independent of the collision-induced dissociation behavior of the GSH conjugates. Furthermore, this method is amenable to a broad class of reactive intermediate trapping agents as exemplified by the simultaneous detection and structural elucidation of the cyano-N-methylene iminium ion conjugates of verapamil and its O-desmethyl metabolites, which we report for the first time. In addition to the chemically tagged reactive intermediates, this method also provides information on stable metabolites from the full scan accurate MS data.     

Fractional mass filtering as a means to assess circulating metabolites in early human clinical studies

Recent changes in the regulatory environment have led to a need for new methods to assess circulating human drug metabolites in early clinical studies with respect to their potential toxicological impact. The specific goals of such studies are to determine if the metabolites present in human plasma following administration of a drug candidate also are observed in plasma from the animal studies employed for preclinical toxicological evaluation, and to estimate corresponding exposure margins (animal:human) for the major metabolites. Until recently, the accepted best practice for the characterization of circulating drug metabolites utilized liquid chromatography/tandem mass spectrometry (LC/MS/MS)-based methodologies, in conjunction with authentic chemical standards, for the detection and quantitative analyses of metabolites predicted from both animal studies and experiments with human liver preparations in vitro. While this approach is satisfactory for anticipated biotransformation products, metabolites that were not expected to circulate in human plasma frequently escape detection. Current accurate mass instruments enable the use of the technique of fractional mass filtering to detect both expected and unexpected metabolites in a rapid, less resource-intensive and more robust manner. Application of this technology to several clinical development programs at Merck Research Laboratories has demonstrated the value of fractional mass filtering in the assessment of circulating drug metabolites in early clinical trials.     

Ion mobility augments the utility of mass spectrometry in the identification of human hemoglobin variants

The global dispersion of hemoglobin variants through population migration has precipitated a need for their identification. A particularly effective mass spectrometry (MS)-based procedure involves analysis of the intact globin chains in diluted blood to detect the variant through mass anomalies, followed by location of the variant amino acid residue by direct analysis of the enzymatically digested globins. Here we demonstrate the use of ion mobility separation in combination with this MS procedure to reduce mass spectral complexity. In one example, the doubly charged tryptic peptide from a low abundance variant (4%) occurred at the same m/z value as a singly and a doubly charged interfering ion. In another example, the singly charged tryptic peptide from an alpha-chain variant (26%) occurred at the same m/z value as a doubly charged interfering ion. Ion mobility was used to separate the variant ions from the interfering ions, thus allowing the variant peptides to be observed and sequenced by tandem mass spectrometry.     

Laser desorption/ionization mass spectrometry fingerprinting of complex hydrocarbon mixtures: application to crude oils using data mining techniques

Crude oil fingerprints were obtained from four crude oils by laser desorption/ionization mass spectrometry (LDI-MS) using a silver nitrate cationization reagent. Replicate analyses produced spectral data with a large number of features for each sample (>11,000 m/z values) which were statistically analyzed to extract useful information for their differentiation. Individual characteristic features from the data set were identified by a false discovery rate based feature selection procedure based on the analysis of variance models. The selected features were, in turn, evaluated using classification models. A substantially reduced set of 23 features was obtained through this procedure. One oil sample containing a high ratio of saturated/aromatic hydrocarbon content was easily distinguished from the others using this reduced set. The other three samples were more difficult to distinguish by LDI-MS using a silver cationization reagent; however, a minimal number of significant features were still identified for this purpose. Focus is placed on presenting this multivariate statistical method as a rapid and simple analytical procedure for classifying and distinguishing complex mixtures.     

Optical properties of ultrashort semiconducting single-walled carbon nanotube capsules down to sub-10 nm

Single-walled carbon nanotubes (SWNTs) are typically long (greater than or approximately equal 100 nm) and have been well established as novel quasi one-dimensional systems with interesting electrical, mechanical, and optical properties. Here, quasi zero-dimensional SWNTs with finite lengths down to the molecular scale (7.5 nm in average) were obtained by length separation using a density gradient ultracentrifugation method. Different sedimentation rates of nanotubes with different lengths in a density gradient were taken advantage of to sort SWNTs according to length. Optical experiments on the SWNT fractions revealed that the UV-vis-NIR absorption and photoluminescence peaks of the ultrashort SWNTs blue-shift up to approximately 30 meV compared to long nanotubes, owing to quantum confinement effects along the length of ultrashort SWNTs. These nanotube capsules essentially correspond to SWNT quantum dots.     

Multi-electron reduction from alkyl/hydride ligand combinations in U4+ complexes

The U4+ mixed alkyl hydride complex (C5Me5)U[mu-C5Me3(CH2)2](mu-H)2U(C5Me5)2, 1, which contains a cyclopentadienyl ligand with two metalated methylene substituents, can effect four, six, and eight-electron reductions in which the combination of the two H1- ligands and the [C5Me3(CH2)2]3- moiety delivers four electrons and forms (C5Me5)1-. The reaction is formally equivalent to an alkyl hydride reductive elimination, a transformation common with transition metals not previously observed with f element compounds. This type of alkyl hydride reduction reactivity is also observed with a combination of U4+ alkyl and hydride complexes, (C5Me5)2UMe2/[(C5Me5)2UH2]2, which reduces benzene to make [(C5Me5)2U]2(C6H6), a U3+ complex formally containing a (C6H6)2- ligand.     

A combinatorial method for solution-phase synthesis of labeled bivalent beta-turn mimics

Piperidine-functionalized, 1,4-disubstituted-1,2,3-triazoles of generic structure 1 were conceived as "minimalist" mimics of peptidic beta-turn structures. Key features of these molecules include (i) the possibility of incorporating amino acid side chains corresponding to many of the protein amino acids; (ii) a close correspondence of separations of these side chains to i + 1 to i + 2 residues in turns; (iii) facile adjustment of the side-chain vectors on docking while only influencing two critical degrees of freedom; and (iv) some electrostatic polarity. Fifteen monomers of this type were made via copper-mediated cycloaddition reactions. Solution-phase methodologies were devised to assemble these monomers into bivalent compounds in high purity states (typically >85%) so that they could be used in first-pass biological assays without further purification. The skeleton for forming these bivalent compounds is triazine-based. There is a third site which allowed for introduction of a fluorescent label (library of compounds 2) or an alkyne-functionalized triethylene glycol chain (library of compounds 3) included to promote water-solubility and to allow incorporation of probes via copper-mediated cycloaddition reactions. In the event, two 135-membered libraries were prepared, one consisting of compounds 2 and the other of 3. No protecting groups or coupling agents were required; these attributes of the method were important to allow most of the products to be obtained in over 85% purities. The fluorescein-tagged library of compounds 2 was screened in a fluorescence-activated cell sorting (FACS) assay using cells transfected to overexpress one of the following neurotrophin receptors: TrkA, TrkC, and p75. Preliminary findings indicate four compounds 2gm, 2gn, 2gi, and 2gj bound the TrkA receptor selectively; all of these contain a threonine-lysine turn mimic. Thus, a pharmacological probe for the TrkA receptor has been developed.     

Syntheses of the Stemona alkaloids (+/-)-stenine, (+/-)-neostenine, and (+/-)-13-epineostenine using a stereodivergent Diels-Alder/azido-Schmidt reaction

A tandem Diels-Alder/azido-Schmidt reaction sequence provides rapid access to the core skeleton shared by several Stemona alkaloids including stenine, neostenine, tuberostemonine, and neotuberostemonine. The discovery and evolution of inter- and intramolecular variations of this process and their applications to total syntheses of (+/-)-stenine and (+/-)-neostenine are described. The stereochemical outcome of the reaction depends on both substrate type and reaction conditions, enabling the preparation of both (+/-)-stenine and (+/-)-neostenine from the same diene/dienophile combination.     

A supramolecularly-caged ionic iridium(III) complex yielding bright and very stable solid-state light-emitting electrochemical cells

A new iridium(III) complex showing intramolecular interligand pi-stacking has been synthesized and used to improve the stability of single-component, solid-state light-emitting electrochemical cell (LEC) devices. The pi-stacking results in the formation of a very stable supramolecularly caged complex. LECs using this complex show extraordinary stabilities (estimated lifetime of 600 h) and luminance values (average luminance of 230 cd m-2) indicating the path toward stable ionic complexes for use in LECs reaching stabilities required for practical applications.     

CW cavity ring-down spectroscopy (CRDS) with a semiconductor optical amplifier as intensity modulator

We summarized both advantages and disadvantages of different light modulators used in cw-CRDS experiments. For the first time, we introduce the use of a semiconductor optical amplifier (SOA) as light modulator in cw-CRDS. A direct comparison of the sensitivity realized on the same instrument using an SOA as modulator with use of an acousto-optic modulator (AOM) has been made. It is found that the SOA has larger extinction ratio (81 dB) than the AOM. For our instrument, with single-shot initial signal-to-noise ratio of 1400:1, these two modulators are found giving equivalent sensitivity.