Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Angular ligand constraint yields an improved olefin aziridination catalyst

[reaction: see text] The use of a pyridinophane, a macrocycle composed of three pyridines linked, via all ortho positions through CH(2) or CH(2)CH(2) groups, bound to copper, gives good performance (rate and yield) catalyzing the conversion of substituted aliphatic olefins and PhINTs to aziridines. Advantages also derive from using CH(2)Cl(2) solvent and the weakly coordinating anions BAr(4)(-) (Ar = C(6)H(5) or 3,5-C(6)H(3)(CF(3))(2)). Reactions are complete in minutes at 20 degrees C, and yields are almost quantitative for olefins not bearing secondary allylic CH bonds; however, cis-cyclooctene gives only the aziridine despite the allylic hydrogens.     

Bromination of sydnones. III. Bromination of 3-(2-substituted-phenyl)sydnones and subsequent side chain modification

Bromination of the sydnone ring of several ortho-substituted N-arylsydnones is reported. Subsequent side-chain modification generally can be achieved without concomitant removal of the 4-bromo protective group.     

Fast atom bombardment mass spectrometry; a promising tool for structural studies

Fast atom bombardment mass spectrometry (FABMS) is a powerful new structural tool. Ionization is effected by bombarding a glycerol matrix with neon or argon atoms of 5–10 KeV energy. Positive and negative secondary ions are sputtered from the surface and can be detected for inorganic ion clusters to mass 25 800 and biologically important compounds to mass 5 700. FABMS is especially valuable in determining the sequence of amino acids in polypeptides.     

Evaluation of protocols for reproducible electrospray in-source collisionally induced dissociation on various liquid chromatography/mass spectrometry instruments and the development of spectral libraries

Mass spectral libraries provide a tool for identifying unknown compounds using both molecular weight and fragmentation information. Mass spectrometers with electrospray ionisation (ESI) and atmospheric chemical ionisation (ApCI) sources have the capability to produce data of this type using in-source collisionally induced dissociation (CID), and in-source CID libraries can be created. Due to the variation in electrospray source design from different instrument manufacturers, the production of reproducible in-source CID spectra that can be used in libraries for all instrument types is not a trivial task. To date, the evaluation of the production of in-source CID libraries has tended to focus on similar instruments from one manufacturer. The studies have also tended to focus on specific compound classes, with a limited molecular weight range.This report describes the findings from the investigation of protocols for the creation of mass spectral libraries using ESI in-source CID on six instruments from four different manufacturers. The overall goal was to create a spectral library for the identification of unknowns. The library could then be applied across all manufacturers' electrospray instruments.Two different experimental protocols were attempted. The first used a tuning compound to establish standard ESI source conditions, with fixed fragmentation potentials. The second involved the attenuation of the [M + H](+) ion to a known degree. A diverse range of compounds (pharmaceutical, photographic, pesticides) was tested to establish the reproducibility of the spectra on the six instruments. Both protocols produced spectra on the various instruments that in many cases were very similar. In other examples, the spectra differed not only in their relative ion abundances, but also in terms of the spectral content. Important observations regarding the effect of ion source design are also reported.The degree of spectral reproducibility was calculated off-line by comparing the five most abundant ions (20% for each ion that matches) from each spectrum on each instrument. This approach was adopted, as we do not possess a software package that met our requirements for spectral comparison. Match factors (% fit) were calculated by comparing each spectrum against the spectra recorded for the same compound and then for all other compounds, on each instrument. The % fit values derived by the off-line approach gave a clear view of the spectral reproducibility from instrument to instrument and also discriminated the spectra of the various compounds from each other. The applicability of this approach was tested using a blind trial in which several compounds were presented as unknowns, their in-source CID spectra recorded and the five-ion approach used for identification.     

Multi-residue method for rapid screening and confirmation of pesticides in crude extracts of fruits and vegetables using isocratic liquid chromatography with electrospray tandem mass spectrometry

A LC-MS-MS method capable of the quantitative determination of a range of pesticide residues present in crude extracts from a variety of fruit and vegetables has been developed. Isocratic LC conditions have been used in conjunction with electrospray ionisation tandem mass spectrometry to detect and identify up to 38 pesticides presented as various mixtures in different matrices. The utility of the method is demonstrated by the analysis of crude extracts, with no sample clean up, from grape, kiwi fruit, strawberry, spinach, lemon, peach and nectarine. Mean recoveries ranging from 63 to 96% with relative standard deviations < 20% were obtained for 30 of the 38 pesticides following analysis of organic produce fortified at concentrations between 0.01 and 0.8 mg/kg. Detected residues were quantified from interpolation against calibration data generated using matrix-matched standards that covered analyte concentration ranges between 0.005 and 0.8 microg/ml. Conditions suitable for the qualitative and quantitative confirmation of residues detected in samples are specified.     

beta-Phenylethylamines and the isoquinoline alkaloids

This review covers beta-phenylethylamines and isoquinoline alkaloids derived from them, including further products of oxidation, condensation with formaldehyde and rearrangement, some of which do not contain as isoquinoline system, together with napthylisoquinoline alkaloids, which have a different biogenetic origin. The occurrence of the alkaloids with the structures of new bases, together with their reactions and syntheses, are reported. The literature from July 2003 to June 2004 is reviewed, with 145 references cited.     

The reaction of 4-(p-nitrobenzyl)pyridine with some electrophiles

The nucleophile 4-(p-nitrobenzyl)pyridine was allowed to react with four carcinogenic alkylating agents, chloromethyl methyl ether, bis(chloromethyl) ether, glycol sulfate and propane sultone, one carcinogenic acylating agent, N,N-dimethylcarbamyl chloride, and one noncarcinogenic electrophile, perchlorocyclobutenone. The structures of the major products formed, which are substituted pyridinium salts or 1,4-dihydropyridines, were determined.     

Preparation,properties and crystal structure of 1,2,5,6-tetrathiacyclooctane : The elusive mesocyclic bis-disulfide

The synthesis of the eight-membered ring containing two disulfides, 1,2,5,6-tetrathiacyclooctane, is described. It is characterized by x-ray crystallography as well as by mass, IR, Raman, ¹H-NMR und UV spectroscopy     

Synthesis of the tetrahydroisoquinoline alkaloid (+/-)-renieramycin G and A (+/-)-lemonomycinone analogue from a common intermediate

The total synthesis of tetrahydroisoquinoline alkaloids (+/-)-renieramycin G (4) and a lemonomycinone analogue (7) is described. A general strategy to synthesize both the mono- and bistetrahydroisoquinoline alkaloids from a common advanced intermediate, 17, is presented.