Study of warpage due to P-V-T-C relation of EMC in IC packaging

There were many studies about the prediction of warpage due to thermal mismatch , . However, cure induced warpage is usually ignored and the results can be inaccurate. To minimize this problem, a thorough understanding of epoxy molding compound (EMC) with pressure-volume-temperature-cure (P-V-T-C) relation is necessary. This paper used the P-V-T-C relation of an encapsulation material to formulate the stress-strain relationship. With the help of finite element method (FEM) and mold flow analysis, warpage predictions combined with P-V-T-C relation were performed and the results show that this approach is practical. For a given P-V-T-C relation, the shrinkage direction is pointing toward the gate and maximum warpage usually occurs at the boundary of an integrated circuit (IC) package. Variation of specific volume difference along the flow direction is larger than that perpendicular to the flow direction. When temperature difference is small in thickness direction, specific volume difference in thickness direction varies only slightly.     

Trenched‐Sinker LDMOSFET (TS‐LDMOS) Structure for 2 GHz Power Amplifiers

This paper proposes a new LDMOSFET structure with a trenched sinker for high‐power RF amplifiers. Using a low‐temperature, deep‐trench technology, we succeeded in drastically shrinking the sinker area to one‐third the size of the conventional diffusion‐type structure. The RF performance of the proposed device with a channel width of 5 mm showed a small signal gain of 16.5 dB and a maximum peak power of 32 dBm with a power‐added efficiency of 25% at 2 GHz. Furthermore, the trench sinker, which was applied to the guard ring to suppress coupling between inductors, showed an excellent blocking performance below ?40 dB at a frequency of up to 20 GHz. These results confirm that the proposed trenched sinker should be an effective technology both as a compact sinker for RF power devices and as a guard ring against coupling.     

On Striping Traffic over Multiple IEEE 802.11(b) Wireless Channels

Due to interference, path loss, multipath fading, background noise, and many other factors, wireless communication normally cannot provide a wireless link with both a high data rate and a long transmission range. To address this problem, striping network traffic in parallel over multiple lower-data-rate but longer-transmission-range wireless channels may be used. In this paper, we propose a new striping method and evaluate its performances over multiple IEEE 802.11(b) channels under various conditions. Our extensive simulation results show that this method is quite effective for such an application. S.Y. Wang is an Associate Professor of the Department of Computer Science and Information Engineering at National Chiao Tung University, Taiwan. He received his Master and Ph.D. degree in computer science from Harvard University in 1997 and 1999, respectively. His research interests include wireless networks, Internet technologies, network simulations, and operating systems. He is the author of the NCTUns 2.0 network simulator and emulator, which is being widely used by network and communication researchers. More information about the tool is available at http://NSL.csie.nctu.edu.tw/nctuns.html. C.H. Hwang received his master degree in computer science from NCTU in 2002 and currently is working for a network company. C.L. Chou currently is a third-year Ph.D. student at the Department of Computer Science and Information Engineering, National Chiao TungUniversity (NCTU), Taiwan. He received his master degree in computer science from NCTU in 2002.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

High‐Performance,Monolithic Polyaniline Electrochemical Actuators

New polyaniline (PANI) asymmetric membranes were fabricated using a phase‐inversion technique with hexane as the coagulation bath. These membranes exhibit a dense structure with macrovoids distributed asymmetrically throughout the cross‐section. A stress–strain study demonstrated that the Young's modulus (1.421 GPa) and strain at break (7.6 %) of the new PANI asymmetric membranes prepared from hexane are approximately 12 and 4 times higher, respectively, than the values reported previously for the PANI integrally skinned asymmetric membranes (ISAMs) (123 MPa Young's modulus and 1.8 % strain at break). Furthermore, monolithic electrochemical actuators based on a single PANI asymmetric membrane were constructed, and a bending movement of up to 20 Hz was experimentally recorded in a hydrochloric acid aqueous solution. A lifetime of over 329 500 cycles was determined for these actuators at a ± 2° angular displacement (5 Hz). The lifetime is limited by a bending fatigue that creates a transversal crack on the PANI membrane at the air–water interface. Control over the actuator movement is also manifested by the linear dependences of the bending angle on the charge and of the angular velocity on the current. These relationships are independent of both the kind of applied electric signal and the frequency used.     

Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Dihalodimethyltin(IV) complexes of 2‐(pyrazol‐1‐ylmethyl)pyridine

Reaction of dichloro‐ and dibromodimethyltin(IV) with 2‐(pyrazol‐1‐ylmethyl)pyridine (PMP) afforded [SnMe₂Cl₂(PMP)] and [SnMe₂Br₂(PMP)] respectively. The new complexes were characterized by elemental analysis and mass spectrometry and by IR, Raman and NMR (¹H, ¹³C) spectroscopies. Structural studies by X‐ray diffraction techniques show that the compounds consist of discrete units with the tin atom octahedrally coordinated to the carbon atoms of the two methyl groups in a trans disposition (Sn? C = 2.097(5), 2.120(5) Å and 2.110(6), 2.121(6) Å in the chloro and in the bromo compounds respectively), two cis halogen atoms (Sn? Cl = 2.4908(16), 2.5447(17) Å; Sn? Br = 2.6875(11), 2.7464(9) Å) and the two donor atoms of the ligand (Sn? N = 2.407(4), 2.471(4) Å and 2.360(5), 2.455(5) Å). In both cases, the Sn? N(pyridine) bond length is markedly longer than the Sn? N(pyrazole) distance. Copyright © 2003 John Wiley & Sons, Ltd.     

Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Adaptive median filters: new algorithms and results

Based on two types of image models corrupted by impulse noise, we propose two new algorithms for adaptive median filters. They have variable window size for removal of impulses while preserving sharpness. The first one, called the ranked-order based adaptive median filter (RAMF), is based on a test for the presence of impulses in the center pixel itself followed by a test for the presence of residual impulses in the median filter output. The second one, called the impulse size based adaptive median filter (SAMF), is based on the detection of the size of the impulse noise. It is shown that the RAMF is superior to the nonlinear mean L(p) filter in removing positive and negative impulses while simultaneously preserving sharpness; the SAMF is superior to Lin's (1988) adaptive scheme because it is simpler with better performance in removing the high density impulsive noise as well as nonimpulsive noise and in preserving the fine details. Simulations on standard images confirm that these algorithms are superior to standard median filters.     

Crystallographic report: Bis(norfloxacin)dilead(II) tetranitrate, [Pb2(H‐Norf)2(ONO2)4]

The centrosymmetric binuclear structure of [Pb₂(H‐Norf)₂(ONO₂)₄]shows the geometry around each lead(II) atom to be distorted trigonal bipyramidal with Pb–O distances ranging from 2.357(3) to 2.769(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.