Active control of the depletion boundary layers in microfluidic electrochemical reactors

In this paper, we describe three methods to improve the performance of pressure-driven laminar flow-based microreactors by manipulating reaction-depletion boundary layers to overcome mass transfer limitations at reactive surfaces on the walls, such as electrodes. The transport rate of the reactants to the reactive surfaces is enhanced by (i) removing the depleted zone through multiple periodically-placed outlets; (ii) adding fresh reactants through multiple periodically-placed inlets along the reactive surface; or (iii) producing a spiraling, transverse flow through the integration of herringbone ridges along the channel walls. For approaches (i) and (ii), the network of microfluidic channels needs to be designed such that under the operating conditions used the right amount of boundary layer at each outlet or inlet is removed or replenished, respectively. Here, we report a set of design rules, derived with the help of a fluidic resistance circuit model, to aid in the design of appropriate microfluidic networks. Also, the actual enhancement of the performance of the electrochemical microreactor, i.e. chemical conversion efficiency, using multiple inlets, multiple outlets, or herringbone ridges is reported.     

Studies on oxidopyrylium [5+2] cycloadditions: toward a general synthetic route to the C12-hydroxydaphnetoxins

[Structure: see text] 12-hydroxydaphnetoxins, members of the structurally fascinating daphnane diterpene family, exhibit a wide range of significant biological activities. A general route to the BC-ring system of 12-hydroxy daphnetoxins is reported based on D-ribose. Depending on the choice of protecting groups and solvent, the oxidopyrylium-alkene [5+2] cycloaddition originating from A provides cycloadduct diastereomer B or C with good to excellent selectivity.     

Computational study of pharmacophores: beta-lactams

The thermochemistry of bicyclic lactams (penams, penems, cephams, cephems), which are key pharmacophores in beta-lactam antibiotics, has been investigated by high-level ab initio methods. Particular attention has been paid to estimating magnitudes of amide resonance (ARE) and ring strain (RSE) in the four-member lactam ring because these quantities are difficult to measure and distinguish experimentally. The ring strain destabilization effect is greater than the stabilization arising from amide resonance. However, in cephemes the amide resonance stabilization slightly exceeds destabilization due to the beta-lactam ring strain.     

Resonant amplification of frustrated evanescent waves by single dielectric coating

Resonant amplification and enhancement of evanescent wave’s frustration across an optical barrier by using single dielectric coating is numerically demonstrated in this article. With further tuning of the thickness values of the second and the third medium (optical barrier) of the proposed stratified four-media configuration, it is shown that it may be possible to achieve unity transmittance at discrete, but closely spaced incident angles within the full range defined by the theoretical cut-off limit. The designed configuration may have other potential applications than lithography and waveguide design is one such example.     

Characterization of structural irregularities in highly birefringent photonic crystal fiber using torsional acoustic polarization coupling

We demonstrate a novel method to characterize structural irregularities in a highly birefringent photonic crystal fiber (HB PCF) with high accuracy based on polarization coupling by torsional acoustic wave. Birefringence variation induced by the irregularities of air-hole structure in the fiber cross-section is analyzed via the transmission spectra of the acousto-optic coupling between two orthogonal polarization modes propagating along the fiber. The estimated maximum birefringence variation of two sections in the same batch of the HB PCF is 3 × 10^− 6 and 10^− 5, respectively, from nominal birefringence value of 4.86 × 10^− 4. The comparison between the experimental results and the numerical simulation resulted in the estimation of few tens of nm variation in the air-hole structure in the PCF.     

Switched‐Capacitor Variable Gain Amplifier with Operational Amplifier Preset Technique

We present a novel operational amplifier preset technique for a switched‐capacitor circuit to reduce the acquisition time by improving the slewing. The acquisition time of a variable gain amplifier (VGA) using the proposed technique is reduced by 30% compared with a conventional one; therefore, the power consumption of the VGA is decreased. For additional power reduction, a programmable capacitor array scheme is used in the VGA. In the 0.13 μm CMOS process, the VGA, which consists of three‐stages, occupies 0.33 mm² and dissipates 19.2 mW at 60 MHz with a supply voltage of 1.2 V. The gain range is 36.03 dB, which is controlled by a 10‐bit control word with a gain error of ±0.68 LSB.     

Thin-film encapsulation of top-emission organic light-emitting devices with polyurea/Al2O3 hybrid multi-layers

We developed a room-temperature encapsulation process based on multi-stack of ultra thin Al₂O₃ and polyurea layers for top-emission organic light-emitting devices (TEOLEDs). Device structure, including a capping layer for refractive-index matching and a thick polyurea buffer layer, was optimized to enhance light extraction without distorting electroluminescence spectrum. The efficiency of a TEOLED encapsulated with 5 pairs of Al₂O₃(50 nm)/polyurea(20 nm) layers was better than that of a glass-encapsulated TEOLED, whereas their color coordinates were almost identical. Moreover, the half-decay lifetime of a TEOLED encapsulated with 5 pairs of Al₂O₃/polyurea layers was 86% of that of a glass-encapsulated TEOLED. Water vapor transition rate of 5 pairs of Al₂O₃(50 nm)/polyurea(20 nm) layers on PET film was measured as low as 5 × 10⁻⁴ g/m² day.     

Nanohybridization of Low-Dimensional Nanomaterials: Synthesis,Classification, and Application

Nanomaterials have attracted much attention from academic to industrial research. General methodologies are needed to impose architectural order in low-dimensional nanomaterials composed of nanoobjects of various shapes and sizes, such as spherical particles, rods, wires, combs, horns, and other non specified geometrical architectures. These nanomaterials are the building blocks for nanohybrid materials, whose applications have improved and will continuously enhance the quality of the daily life of mankind. In this article, we present a comprehensive review on the synthesis, dimension, properties, and present and potential future applications of nanomaterials and nanohybrids. Due to the large number of review articles on specific dimension, morphology, or application of nanomaterials, we will focus on different forms of nanomaterials, such as, linear, particulate, and miscellaneous forms. We believe that almost all the nanomaterials and nanohybrids will come under these three categories. Every form or dimension or morphology has its own significant properties and advantages. These low-dimensional nanomaterials can be integrated to create novel nano-composite material applications for next-generation devices needed to address the current energy crisis, environmental sustainability, and better performance requirements. We discuss the synthesis, properties, and morphology of different forms of nanomaterials (building blocks). Moreover, we elaborate on the synthesis, modification, and application of nanohybrids. The applications of these nanomaterials and nanohybrids in sensors, solar cells, lithium batteries, electronic, catalysis, photocatalysis, electrocatalysis, and bio-based applications will be detailed. The time is now ripe to explore new nanohybrids that use individual nanomaterial components as basic building blocks, potentially affording additionally novel behavior and leading to new, useful applications. In this regard, the combination or integration of linear nanorods/nanowires and spherical nanoparticles to produce mixed-dimensionality, higher-level nanocomposites of greater complexity is an interesting theme, which we explore in this review article.     

Evanescent-Coupled Ge p-i-n Photodetectors on Si-Waveguide With SEG-Ge and Comparative Study of Lateral and Vertical p-i-n Configurations

Si-waveguide-integrated lateral Ge p-i-n photodetectors using novel Si/SiGe buffer and two-step Ge-process are demonstrated for the first time. Comparative analysis between lateral Ge p-i-n and vertical p-Si/i-Ge/n-Ge p-i-n is made. Light is evanescently coupled from Si waveguide to the overlaying Ge- detector, achieving high responsivity of 1.16 A/W at 1550 nm with f_{3 dB} bandwidth of 3.4 GHz for lateral Ge p-i-n detector at 5 V reverse bias. In contrast, vertical p-Si/i-Ge/n-Ge p-i-n has lower responsivity of 0.29 A/W but higher bandwidth of 5.5 GHz at -5 V bias. The higher responsivity of lateral p-i-n detectors is attributed to smaller optical mode overlap with highly doped Ge region as in vertical p-i-n configuration.