Interfacial Engineering of CdO–CdSe 3D Microarchitectures with in situ Photopolymerized PEDOT for an Enhanced Photovoltaic Performance

In the present work, porous 3D CdO‐microstructured electrode obtained by pyrolysis of 3D CdCO₃ microstructures is self‐sensitized with CdSe using an ion exchange reaction. After sensitization, an interfacial treatment of the CdO–CdSe interface is performed by depositing a thin film of PEDOT using a photoinduce polymerization route. The microstructured electrode before and after interfacial treatment is characterized using field‐emission scanning microscope, energy dispersive X‐ray analyzer, contact angle measurement, UV–Visible absorption spectrophotometer and X‐ray photoelectron spectrometer. After constructing a liquid junction solar cell with a Pt counter electrode, the photovoltaic performance and interfacial charge transfer kinetics across the CdO–CdSe interface before and after PEDOT treatment are investigated. The results exhibit an improved interfacial charge‐transfer resistance after the PEDOT treatment, which leads to enhance the short‐circuit current by 15.81% and the power conversion efficiency by 19.82%.     

Proteome profile of salt gland‐rich epidermis extracted from a salt‐tolerant tree species

Preparation of proteins from salt‐gland‐rich tissues of mangrove plant is necessary for a systematic study of proteins involved in the plant's unique desalination mechanism. Extraction of high‐quality proteins from the leaves of mangrove tree species, however, is difficult due to the presence of high levels of endogenous phenolic compounds. In our study, preparation of proteins from only a part of the leaf tissues (i.e. salt gland‐rich epidermal layers) was required, rendering extraction even more challenging. By comparing several extraction methods, we developed a reliable procedure for obtaining proteins from salt gland‐rich tissues of the mangrove species Avicennia officinalis. Protein extraction was markedly improved using a phenol‐based extraction method. Greater resolution 1D protein gel profiles could be obtained. More promising proteome profiles could be obtained through 1D‐LC‐MS/MS. The number of proteins detected was twice as much as compared to TUTS extraction method. Focusing on proteins that were solely present in each extraction method, phenol‐based extracts contained nearly ten times more proteins than those in the extracts without using phenol. The approach could thus be applied for downstream high‐throughput proteomic analyses involving LC‐MS/MS or equivalent. The proteomics data presented herein are available via ProteomeXchange with identifier PXD001691.     

Elastic modulus and yield stress of suspensions

A recent technique, developed to measure yield stress has here also been used to determine the elastic modulus of a suspension. Temperature effects have been measured.     

Thermally Controlled,Patterned Graphene Transfer Printing for Transparent and Wearable Electronic/Optoelectronic System

Graphene has been highlighted as a platform material in transparent electronics and optoelectronics, including flexible and stretchable ones, due to its unique properties such as optical transparency, mechanical softness, ultrathin thickness, and high carrier mobility. Despite huge research efforts for graphene‐based electronic/optoelectronic devices, there are remaining challenges in terms of their seamless integration, such as the high‐quality contact formation, precise alignment of micrometer‐scale patterns, and control of interfacial‐adhesion/local‐resistance. Here, a thermally controlled transfer printing technique that allows multiple patterned‐graphene transfers at desired locations is presented. Using the thermal‐expansion mismatch between the viscoelastic sacrificial layer and the elastic stamp, a “heating and cooling” process precisely positions patterned graphene layers on various substrates, including graphene prepatterns, hydrophilic surfaces, and superhydrophobic surfaces, with high transfer yields. A detailed theoretical analysis of underlying physics/mechanics of this approach is also described. The proposed transfer printing successfully integrates graphene‐based stretchable sensors, actuators, light‐emitting diodes, and other electronics in one platform, paving the way toward transparent and wearable multifunctional electronic systems.     

Polyol-mediated solvothermal synthesis and luminescence properties of CeF3, and CeF3:Tb nanocrystals

CeF₃ and CeF₃:Tb³⁺ nanocrystals were successfully synthesized through a facile and effective polyol-mediated route with ethylene glycol (EG) as solvent. Various experimental techniques including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL) spectra as well as decay dynamics were used to characterize the samples. The results indicated that the content of NH₄F and reactant concentrations were key factors in the product shape and size. Excessive NH₄F was necessary for the formation of hexagonal nanoplates. The specific morphology of product can be controlled by changing the NH₄F content and reactant concentrations. In addition, Tb³⁺ doped-CeF₃ sample shows strong green emission centered at 544 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. Due to the decrease of nonradiative decay rate, the lifetime of ⁵D₄ level of Tb³⁺ become longer gradually upon increasing the size of product.     

Columnar/smectic metallomesogens derived from heterocyclic benzoxazoles

The synthesis, mesomorphic behavior, and optical properties of two new series of metal complexes 1a,b-M (M=Pd, Cu, Zn) derived from benzoxazoles 2a,b are reported. The crystal and molecular structures of mesogenic 5-decyloxy-2-(6-decyloxybenzooxazol-2-yl)phenol and nonmesogenic bis[5-octyloxy-2-(6-octyloxybenzooxazol-2-yl) phenol]Pd(II) were determined by means of X-ray structural analysis. Two benzoxazoles 2a exhibited monotropic SmA phases, and all benzoxazoles 2b were nonmesogenic. On the other hand, metal complexes 1a-M exhibited distinctly different mesomorphism from complexes 1b-M. Complexes 1a-Pd formed SmC phases; complexes 1a-Cu and 1a-Zn formed crystal phases. In contrast, complexes 1b-Zn exhibited columnar phases, and complexes 1b-Cu and 1b-Pd were nonmesogenic. The difference of the mesomorphism in 1a-M and 1b-M was probably attributed to the geometry and/or the overall molecular shape created by 2a and 2b. The electronic configuration of metal ion might play an important role in forming the mesophases. The fluorescent properties of these compounds were also examined.     

Influence of Methyl Substituent Position on Redox Properties of Nitroaromatics Related to 2,4,6‐Trinitrotoluene

The environmental remediation of military installation sites is very important due to frequently large presence of carcinogenic derivatives of explosives in the ground and in ground waters. These nitroaromatic explosives and their derivatives are assessed by sensing devices. It is highly important to have insight on the reasons affecting the reduction potentials of these compounds. The redox properties of mono‐, di‐ and tri‐nitroaromatic compounds are studied with cyclic voltammetry at a glassy carbon electrode for comparison. We show that the presence of a methyl group in the aromatic system leads into more negative reduction potentials. The ease of nitro group reduction vary from meta>para>ortho positions relative to a methyl group. The redox properties were also studied at various pH ranging from 2 to 10. Acidic environments facilitated the reduction processes at lower potentials. These findings will have a profound influence upon understanding the processes during reductive decontaminations of the polluted sites as well as for construction of highly sensitive sensors for their determination.     

Microbial electricity generation of diversified carbonaceous electrodes under variable mediators

To evaluate a suitable electrode material for the efficient green energy generation of a bio-fuel cell, carbonaceous based carbon cloth, carbon paper, and carbon felt electrodes were investigated under different mediators. The larger surface area, low resistance, and open network of interwoven fibers of the carbon felt electrode facilitated higher electron transfer from the microbial organisms to the electrode surface than that of other carbonaceous electrodes. Carbon paper electrode exhibited lower fuel cell performances due to its lower roughness and high tortuous nature. The green power generation experiments were also carried out under different mediators such as 2-hydroxy-l,4-naphthoquinone and thionin. The electrons mitigation and power generation was augmented by 2-hydroxy-l,4-naphthoquinone than thionin due to its high solubility, stability, and minimal adsorption characteristic to the electrodes. By the combined efforts of extended electrons generation and transportation, bio-fuel cell performances were extended and endorsed its doable applications in bio-fuel cells.     

Hydrazone-based ligands for micro-solid phase extraction-high performance liquid chromatographic determination of biogenic amines in orange juice

Eight hydrazone-based ligands were synthesized, trapped in a silica sol-gel matrix, and were subsequently used in the micro-solid phase extraction (μ-SPE) of biogenic amines (BAs). The BAs investigated were tryptamine, phenylethylamine, putrescine, histamine, tyramine and spermidine. Prior to the extraction, dansyl chloride was added to the samples which were heated to 70°C for 10 min. The samples were extracted with μ-SPE, after which analytes were desorbed using acetonitrile via ultrasonication. The extracts were analysed by high performance liquid chromatography (HPLC) with ultraviolet detection. Of the eight ligands investigated as sorbents, benzophenone 2,4-dinitrophenylhydrazone was found to be the most promising. The enhanced π-π interaction between the analytes and the ligand facilitated the adsorption process. Under the most suitable extraction conditions, the method demonstrated good linearity with correlation coefficient of more than 0.985 over a concentration range of 1-50 μg L(-1). Satisfactory repeatability with relative standard deviations of 7.43-11.30% (n=3) were obtained. Detection limits ranged from 3.8 to 31.3 ng L(-1). The μ-SPE method exhibited lower recoveries (71.5-87.4%) when compared to the solid phase extraction technique (79.7-95.0%), but enrichment factors of 94-460 were obtained. The proposed μ-SPE-HPLC method was applied to the determination of BAs in orange juice purchased from local supermarkets, with satisfactory results. The orange juices were characterized by the presence of relatively high levels of putrescine (range, 550-2210 μg L(-1)) but tryptamine and phenylethylamine were not detected in any of the tested samples.