浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

含k-次增生算子的Ishikawa迭代的收敛性问题

主要研究了非线性方程x Tx=f的Ishikawa迭代解．其中T为k-次增生的或增生的，并在一致光滑和任意的实Banach空间分别研究了上述方程的带误差的Ishikawa迭代解，从而推广了已知的一些结果。     

Performance evaluation on a double‐layered satellite network

How to evaluate the performance of satellite networks is a prerequisite to the construction of satellite networks, and is also one of challenges in the researches on satellite networks. In this paper, generalized stochastic Petri net (GSPN) models are presented to carry out the performance analysis of a double‐layered satellite network. Firstly, the GSPN model of a double‐layered satellite network is simplified by proper analysis. Then, two sets of experiments are conducted to analyse the performance of the satellite networks, and show that the double‐layered satellite network outperforms single‐layered ones on the heavy traffic load. Finally, the feasibility and effectiveness of the proposed approach is verified by simulation experiments. Copyright © 2005 John Wiley & Sons, Ltd.     

Q-正则Loewner空间中的拟对称映射

本文在Q-正则Loewner空间中用环模不等式刻划了拟对称映射.另外,在 Q-维Ahlfors-David正则空间中建立了拟对称映射作用下的Grotzsch-Teichmuller型 模不等式,它是通过伸张系数的积分平均来表示.     

类锂铝复合机制产生X光激光的等离子体状态

本文从速率方程出发,讨论了类锂铝复合等离子体的激发态结构,衰减常数,反转率和小信号增益等表征介质增益特性的物理量以及它们随电子温度,电子密度和光子逃逸几率的变化。找到了进行类锂铝离子通过复合机制产生X光激光设计应创造的等离子体状态目标区域。还讨论了这些物理量随原子序数变化的定标律。     

Computation of 2D discrete Hartley transform

Based on a decimation-in-time decomposition, a fast split-radix algorithm for the 2D discrete Hartley transform is presented. Compared to other reported algorithms, the proposed algorithm achieves substantial savings on the number of operations and provides a wider choice of transform sizes     

变参数波振器中小信号增益公式

利用微扰展开技术推导出变参数波振器的小信号增益两个近似求积表达式并将其计算结果与数值模拟结果进行了比较,二者吻合很好。利用近似解析式对小信号增益进行了初步探讨,得到了电子入射能量可低于初始谐振能,能散度允许范围受波振器设计影响以及降低锥度改变率可提高小信号增益等新结论。     

Modeling lossy anisotropic dielectric waveguides with the method oflines

This paper presents a new formulation useful for modeling waveguides constructed from lossy inhomogeneous anisotropic media. Our approach is based on a pair of Sturm-Liouville type wave equations that have been derived to handle inhomogeneous, diagonalized complex permittivity and permeability tensors. The method of lines is then applied to these wave equations, and related field equations, creating an indirect eigenvalue problem that correctly models this class of structure. Some refinements to the method of lines are also proposed, particularly, regarding the construction of the modal matrices found in the eigenvalue problem. Using our approach, modal dispersion curves have been computed for millimeter-wave and optical structures. Comparisons made with results available from the literature validate our approach     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.