How molecular oxygen binds to bis[trifluoroacetylacetonato(-1)]cobalt(II)--ab initio and density functional theory studies

Cobalt(II) diketonate complexes, such as bis[trifluoroacetylacetonato(-1)]cobalt(II) [Co(tfa)(2)], catalyze the aerobic oxidation of alkenols into functionalized tetrahydrofurans. To gain insight into activation of triplet dioxygen by Co(tfa)(2) in a protic solvent, as used in oxidation catalysis, the electronic structure of aquabis[trifluoroacetylacetonato(-1)]cobalt(II)--Co(tfa)(2)(H(2)O)--and the derived dioxygen adduct were characterized using ab initio (CASSCF, NEVPT2) and density functional theory (BP86, TPSSh, B3LYP) methods. The ground state of Co(tfa)(2)(H(2)O) is a high-spin, quartet state. As dioxygen approaches the cobalt atom, the quartet state couples with a triplet dioxygen molecule and forms a sextet, a quartet, and a doublet spin state with the high-spin state being the lowest in energy. At the equilibrium Co-O(2) distance of 1.9 ?, Co(tfa)(2)(H(2)O)(O(2)) has a doublet superoxo Co(III) ground state with the unpaired electron residing on the oxygen moiety, in a nearly unchanged O(2)π* orbital.     

Wettability and surface composition of partly and fully regenerated cellulose thin films from trimethylsilyl cellulose

The wettability and surface free energy (SFE) of partly and fully regenerated cellulose model surfaces from spin coated trimethylsilyl cellulose were determined by static contact angle (SCA) measurements. In order to gain detailed insight into the desilylation reaction of the surfaces the results from SCA measurements were compared with data from other surface analytical methods, namely thickness measurements, X-ray photoelectron spectroscopy (XPS) and attenuated total reflectance infrared spectroscopy (ATR-IR). Additionally, the influence of ultra high vacuum treatment (UHV) during XPS measurements on the water wettability and surface morphology of regenerated cellulose thin films was investigated. The wetting of polar and non-polar liquids increased with prolonged regeneration time, which is reflected in the higher SFE values and polarities of the films. After UHV treatment the water SCA of partly regenerated films decreases, whereas fully regenerated cellulose shows a higher water SCA. Therefore it is assumed that volatile desilylation products tend to adsorb on partly regenerated films, which strongly influences their wettability.     

ThX – a next-generation probe for the early detection of amyloid aggregates

Neurodegenerative diseases such as Alzheimer''s and Parkinson''s are associated with protein misfolding and aggregation. Recent studies suggest that the small, rare and heterogeneous oligomeric species, formed early on in the aggregation process, may be a source of cytotoxicity. Thioflavin T (ThT) is currently the gold-standard fluorescent probe for the study of amyloid proteins and aggregation processes. However, the poor photophysical and binding properties of ThT impairs the study of oligomers. To overcome this challenge, we have designed Thioflavin X, (ThX), a next-generation fluorescent probe which displays superior properties; including a 5-fold increase in brightness and 7-fold increase in binding affinity to amyloidogenic proteins. As an extrinsic dye, this can be used to study unique structural amyloid features both in bulk and on a single-aggregate level. Furthermore, ThX can be used as a super-resolution imaging probe in single-molecule localisation microscopy. Finally, the improved optical properties (extinction coefficient, quantum yield and brightness) of ThX can be used to monitor structural differences in oligomeric species, not observed via traditional ThT imaging.

Introducing ThX, a next-generation ThT derivative that allows for the early detection of amyloid aggregates at the bulk and single-aggregate levels.     

Shifts in polystyrene particle surface charge upon adsorption of the Pluronic F108 surfactant

Electrical field-flow fractionation (ElFFF) and sedimentation field-flow fractionation (SdFFF) were used in combination to study the adsorption of the triblock polymeric surfactant, Pluronic F108 [(EO)129-(PO)56-(EO)129] to 200 nm polystyrene (PS) latex spheres. The SdFFF technique allowed an accurate determination of the mass of surfactant adsorbed on each particle from a solution of given concentration. To complement this isotherm study, we show that ElFFF can be used to measure fractional coverages of the formed electrically neutral surfactant layers on the charged PS particles. Through a combination of the two techniques it is possible to gain information about the structure of the adsorbate layer. Thus, when Pluronic F108 is taken up by the PS surface from solutions of low concentration, all three blocks appear to adhere to the surface as long as there is free space available. As the solution concentration increases and the fractional coverage reaches approximately 20%, the surface turns crowded enough to let the strongly adsorbing PPO blocks competitively displace the weakly adherent PEO blocks, which gradually rise to extend into the aqueous phase until the surface is fully saturated.     

Effect of ionic strength on the rheological behavior of aqueous cetyltrimethylammonium p-toluene sulfonate solutions

The influence of ionic environment on the rheological properties of aqueous cetyltrimethylammonium p-toluene sulfonate (CTAT) solutions has been studied under three different flow fields: simple shear, opposed-jets flow and porous media flow. Emphasis was placed in the experiments on a range of CTAT concentration in which wormlike micelles were formed. It is known that these solutions exhibit shear thickening in the semi-dilute regime, which has been explained in terms of the formation of shear-induced, cooperative structures involving wormlike micelles. In simple shear flow, the zero shear viscosity exhibits first an increase with salt addition followed by a decrease, while the critical shear rate for shear thickening increases sharply at low salt contents and tends to saturate at relatively high ionic strengths. The results are explained in terms of a competition between micellar growth induced by salt addition and changes in micellar flexibility caused by ionic screening effects. Dynamic light scattering results indicate that micelles grow rapidly upon salt addition but eventually achieve a constant size under static conditions. These observations suggest that the wormlike micelles continuously grow with salt addition, but, as they become more flexible due to electrostatic screening, the wormlike coils tend to adopt a more compact conformation. The trends observed in the apparent viscosities measured in porous media flows seem to confirm these hypotheses-but viscosity increases in the shear thickening region-and are magnified by micelle deformation induced by the elongational nature of the local flow in the pores. In opposed-jets flow, the solutions have a behavior that is close to Newtonian, which suggests that the range of strain rates employed makes the flow strong enough to destroy or prevent the formation of cooperative micellar structures.     

Discovery of novel catalytic materials for emissions control using high throughput scanning mass spectrometry

High-throughput approaches were applied to the discovery of more efficient catalysts for various applications in emissions control. The screening approach was based on a hierarchy of qualitative or semi-quantitative primary screens for discovery of hits and quantitative secondary screens for confirmation and scale-up of leads. In this work, primary screening was carried out by fast scanning mass spectrometry (SMS) for NO(x) abatement, low temperature CO oxidation, VOC removal, CO(x) methanation and the water gas shift (WGS) reaction.     

A calorimetry and light scattering study of the formation and shape transition of mixed micelles of EO20PO68EO20 triblock copolymer (P123) and nonionic surfactant (C12EO6)

The interaction between the nonionic surfactant C12EO6 and the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer EO20PO68EO20 (P123) has been investigated by means of isothermal titration and differential scanning calorimetry (DSC) as well as static and dynamic light scattering (SLS and DLS). P123 self-assembles in water into spherical micelles at ambient temperatures. At raised temperatures, the DSC data revealed a sphere-to-rod transition of the P123 micelles around 60 degrees C. C12EO6 interacts strongly with P123 micelles in aqueous solution to give mixed micelles with a critical micelle concentration (cmc) well below the cmc for pure C12EO6. The presence of C12EO6 also lowers the critical micelle temperature of P123 so aggregation starts at significantly lower temperatures. A new phenomenon was observed in the P123-C12EO6 system, namely, a well-defined sphere-to-rod transition of the mixed micelles. A visual phase study of mixtures containing 1.00 wt % P123 showed that in a narrow concentration range of C12EO6 both the sphere-to-rod transition and the liquid-liquid phase separation temperature are strongly depressed compared to the pure P123-water system. The hydrodynamic radius of spherical mixed micelles at a C12EO6/P123 molar ratio of 2.2 was estimated from DLS to be 9.1 nm, whereas it is 24.1 nm for the rodlike micelles. Furthermore, the hydrodynamic length of the rods at a molar ratio of 2.2 is in the range of 100 nm. The retarded kinetics of the shape transition was detected in titration calorimetric experiments at 40 degrees C and further studied by using time-resolved DLS and SLS. The rate of growth, which was slow (>2000 s), was found to increase with the total concentration.     

Intersystem crossing processes in nonplanar aromatic heterocyclic molecules

A comprehensive study of the photophysical properties of a series of monoaza[5]helicenes is presented on the basis of joint optical spectroscopy and quantum chemistry investigations. The molecules have been characterized by absorption and CW/time-resolved luminescence measurements. All quantities related to spin-orbit-coupling processes, such as intersystem crossing rates and radiative phosphorescence lifetimes, were found to depend strongly on the nitrogen position within the carbon backbone. Density functional theory and semiempirical quantum-chemical methods were used to evaluate the molecular geometries, the characteristics of the excited singlet and triplet states, and the spin-orbit coupling matrix elements. We demonstrate that the magnitude of spin-orbit coupling is directly correlated with the degree of deviation from planarity. The trends from the calculated photophysical quantities, namely, radiative fluorescence and phosphorescence decay rates and intersystem crossing rates, of the mono-aza-helicenes are fully consistent with experiment.     

Novel photoswitchable rotaxanes

A photoresponsive rotaxane based on the photoheterolysis of an acridane unit which is at the same time a bulky end group has been developed.     

Modification and re-validation of the ethyl acetate-based multi-residue method for pesticides in produce

The ethyl acetate-based multi-residue method for determination of pesticide residues in produce has been modified for gas chromatographic (GC) analysis by implementation of dispersive solid-phase extraction (using primary–secondary amine and graphitized carbon black) and large-volume (20 μL) injection. The same extract, before clean-up and after a change of solvent, was also analyzed by liquid chromatography with tandem mass spectrometry (LC–MS–MS). All aspects related to sample preparation were re-assessed with regard to ease and speed of the analysis. The principle of the extraction procedure (solvent, salt) was not changed, to avoid the possibility invalidating data acquired over past decades. The modifications were made with techniques currently commonly applied in routine laboratories, GC–MS and LC–MS–MS, in mind. The modified method enables processing (from homogenization until final extracts for both GC and LC) of 30 samples per eight hours per person. Limits of quantification (LOQs) of 0.01 mg kg⁻¹ were achieved with both GC–MS (full-scan acquisition, 10 mg matrix equivalent injected) and LC–MS–MS (2 mg injected) for most of the pesticides. Validation data for 341 pesticides and degradation products are presented. A compilation of analytical quality-control data for pesticides routinely analyzed by GC–MS (135 compounds) and LC–MS–MS (136 compounds) in over 100 different matrices, obtained over a period of 15 months, are also presented and discussed. At the 0.05 mg kg⁻¹ level acceptable recoveries were obtained for 93% (GC–MS) and 92% (LC–MS–MS) of pesticide–matrix combinations.