Multi-objective routing algorithms for low-earth orbit satellite network

The low-earth orbit (LEO) satellite network, composed of a large number of satellite nodes, is a hot research topic at present. Due to the characteristics of the large-scale LEO satellite network, such as many satellite nodes, short orbit period, large dynamic change of topology, and unstable link-state, its communication quality of service (QoS) requirements are difficult to meet. Aiming at this problem, various factors that may affect data transmission are first analyzed. The network link selection problem is modeled as a multi-constraint optimization decision problem, a routing mathematical model based on linear programming (LP) is designed, and its solution is solved. Aiming at the problem of limited onboard computing resources, a multi-object optimization Dijkstra algorithm (MOODA) is designed. The MOODA finds the optimal path according to the comprehensive performance of the link. It solves the problems of poor comprehensive QoS performance and the low degree of load balancing of the paths found by the Dijkstra algorithm. The simulation results show that the paths found by the two algorithms have good QoS, robustness, and load balancing performance.     

Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Halogenated Ti3C2 MXenes Prepared by Microwave Molten Salt for Hg0 Photo-Oxidation

Ti₃C₂ MXenes with different halogen modifications are prepared rapidly and efficiently by microwave molten salt method, and the MXene surface functional group modification is successfully achieved to address the problems of low purity, complex functional groups, and uncontrollable energy band structure of MXenes obtained by traditional liquid phase etching. Among them, the modification of the iodine (I) functional group onto the surface of Ti₃C₂ changes the energy band structure and band gap, resulting in easier photoexcitation and more photogenerated carriers. The increased Fermi energy is closer to the conduction band, the decreased surface work function weakens the electron confinement ability. The photogenerated carriers can migrate to the surface of the material more easily with extended lifetime, so the activity of the catalyst is improved. Further, for gaseous monomeric mercury (Hg⁰) photo-oxidative removal, Ti₃C₂-I₂ exhibits 85.5% efficiency of Hg⁰ photo-oxidative removal under visible light. Based on the experimental characterization and density functional theory calculations, a mechanism for the photo-oxidative removal of Hg° from Ti₃C₂-I₂ MXene is proposed, which provides a valuable strategy for studying Ti₃C₂ MXenes in the field of photocatalysis.     

Breaking the Responsivity-Bandwidth Trade-Off Limit in GaN Photoelectrodes for High-Response and Fast-Speed Optical Communication Application

Underwater optical communication (UOC) has attracted considerable interest in the continuous expansion of human activities in marine/ocean environments. The water-durable and self-powered photoelectrodes that act as a battery-free light receiver in UOC are particularly crucial, as they may directly face complex underwater conditions. Emerging photoelectrochemical (PEC)-type photodetectors are appealing owing to their intrinsic aqueous operation characteristics with versatile tunability of photoresponses. Herein, a self-powered PEC photodetector employing n-type gallium nitride (GaN) nanowires as a photoelectrode, which is decorated with an iridium oxide (IrO_x) layer to optimize charge transfer dynamics at the GaN/electrolyte interface, is reported. Strikingly, the constructed n-GaN/IrO_x photoelectrode breaks the responsivity-bandwidth trade-off limit by simultaneously improving the response speed and responsivity, delivering an ultrafast response speed with response/recovery times of only 2 µs/4 µs while achieving a high responsivity of 110.1 mA W⁻¹. Importantly, the device exhibits a large bandwidth with 3 dB cutoff frequency exceeding 100 kHz in UOC tests, which is one of the highest values among self-powered photodetectors employed in optical communication system.     

Pre-Activation of CO2 at Cobalt Phthalocyanine-Mg(OH)2 Interface for Enhanced Turnover Rate

Cobalt phthalocyanine (CoPc) anchored on heterogeneous scaffold has drawn great attention as promising electrocatalyst for carbon dioxide reduction reaction (CO₂RR), but the molecule/substrate interaction is still pending for clarification and optimization to maximize the reaction kinetics. Herein, a CO₂RR catalyst is fabricated by affixing CoPc onto the Mg(OH)₂ substrate primed with conductive carbon, demonstrating an ultra-low overpotential of 0.31 ± 0.03 V at 100 mA cm⁻² and high faradaic efficiency of >95% at a wide current density range for CO production, as well as a heavy-duty operation at 100 mA cm⁻² for more than 50 h in a membrane electrode assembly. Mechanistic investigations employing in situ Raman and attenuated total reflection surface-enhanced infrared absorption spectroscopy unravel that Mg(OH)₂ plays a pivotal role to enhance the CO₂RR kinetics by facilitating the first-step electron transfer to form anionic *CO₂⁻ intermediates. DFT calculations further elucidate that introducing Lewis acid sites help to polarize CO₂ molecules absorbed at the metal centers of CoPc and consequently lower the activation barrier. This work signifies the tailoring of catalyst-support interface at molecular level for enhancing the turnover rate of CO₂RR.     

Pre-Buried ETL with Bottom-Up Strategy Toward Flexible Perovskite Solar Cells with Efficiency Over 23%

With rapid development of photovoltaic technology, flexible perovskite solar cells (f-PSCs) have attracted much attention for their light weight, high flexibility and portability. However, the power conversion efficiency (PCE) achieved so far is not yet comparable to that of rigid devices. This is mainly due to the great challenge of depositing homogeneous and high-quality perovskite films on flexible substrate. In this study, the pre-buried 3-aminopropionic acid hydroiodide (3AAH) additives into the electron transport layer (ETL) and modified the ETL/perovskite (PVK) interface by a bottom-up strategy. 3AAH treatment induced a templated perovskite grain growth and improved the quality of the ETL. By this, the residual stresses generated in PVK during the annealing-cooling process are released and converted into micro-compressive stresses. As a result, the defect density of f-PSCs with pre-buried 3AAH is reduced and the photovoltaic performance is greatly improved, reaching an exceptional PCE of 23.36%. This strategy provides a new idea to bridge the gap between flexible and rigid devices.     

Petromyzontidae-Biomimetic Multimodal Microneedles-Integrated Bioelectronic Catheters for Theranostic Endoscopic Surgery

Current catheter devices in minimally invasive surgery still possess limited functional options, lacking multimodal integration of both sensing and therapy. Catheter devices usually operate outside the tissue, incapable to detect intra-tissue biochemical information for accurate localization and assessment of lesions during surgery. Inspired by the feature and functions of Petromyzontidae, here a multimodal core-shell microneedles-integrated bioelectronic catheter (MNIBC) for tissue-penetrating theranostics in endoscopic surgery is developed. The microneedle (MN) device possesses individually addressable functionality at single-MN tip resolution, enabling multiplex functions (a total of 11 functions distributed in three types of catheters) including biochemical sensing, myoelectric modulation, electroporation, and drug delivery in a submucosal environment. The MNIBC is prepared through hybrid fabrication and dimensionality reduction strategies, where the MN electrodes are functionalized with an MXene-carbon nanotube (MXene-CNT)-based electron mediator, addressing the challenge of reduced electrode sensitivity on ultra-small MN tip. The functionalities of MNIBC are demonstrated both ex vivo and in vivo on anesthetized rabbits via laparoscopy, simulated cystoscopy, and laparotomy. The MNIBC can effectively detect intra-tissue biochemical signals in the bladder, and offers localized electroporation and intra-tissue drug delivery for precise treatments of lesions. The versatile features of the MNIBC present a highly advanced platform for precise surgeries.     

A Polymer Defect Passivator for Efficient Hole-Conductor-Free Printable Mesoscopic Perovskite Solar Cells

Due to the low cost and excellent potential for mass production, printable mesoscopic perovskite solar cells (p-MPSCs) have drawn a lot of attention among other device structures. However, the low open-circuit voltage (V_OC) of such devices restricts their power conversion efficiency (PCE). This limitation is brought by the high defect density at perovskite grain boundaries in the mesoporous scaffold, which results in severe nonradiative recombination and is detrimental to the V_OC. To improve the perovskite crystallization process, passivate the perovskite defects, and enhance the PCE, additive engineering is an effective way. Herein, a polymeric Lewis base polysuccinimide (PSI) is added to the perovskite precursor solution as an additive. It improves the perovskite crystallinity and its carbonyl groups strongly coordinate with Pb²⁺, which can effectively passivate defects. Additionally, compared with its monomer, succinimide (SI), PSI serves as a better defect passivator because the long-chained macromolecule can be firmly anchored on those defect sites and form a stronger interaction with perovskite grains. As a result, the champion device has a PCE of 18.84%, and the V_OC rises from 973 to 1030 mV. This study offers a new strategy for fabricating efficient p-MPSCs.     

Inorganic Filler Enhanced Formation of Stable Inorganic-Rich Solid Electrolyte Interphase for High Performance Lithium Metal Batteries

Lithium metal (LM) is a promising anode material for next generation lithium ion based electrochemical energy storage devices. Critical issues of unstable solid electrolyte interphases (SEIs) and dendrite growth however still impede its practical applications. Herein, a composite gel polymer electrolyte (GPE), formed through in situ polymerization of pentaerythritol tetraacrylate with fumed silica fillers, is developed to achieve high performance lithium metal batteries (LMBs). As evidenced theoretically and experimentally, the presence of SiO₂ not only accelerates Li⁺ transport but also regulates Li⁺ solvation sheath structures, thus facilitating fast kinetics and formation of stable LiF-rich interphase and achieving uniform Li depositions to suppress Li dendrite growth. The composite GPE-based Li||Cu half-cells and Li||Li symmetrical cells display high Coulombic efficiency (CE) of 90.3% after 450 cycles and maintain stability over 960 h at 3 mA cm⁻² and 3 mAh cm⁻², respectively. In addition, Li||LiFePO₄ full-cells with a LM anode of limited Li supply of 4 mAh cm⁻² achieve capacity retention of 68.5% after 700 cycles at 0.5 C (1 C = 170 mA g⁻¹). Especially, when further applied in anode-free LMBs, the carbon cloth||LiFePO₄ full-cell exhibits excellent cycling stability with an average CE of 99.94% and capacity retention of 90.3% at the 160th cycle at 0.5 C.     

Formation Theory and Printability of Photocurable Hydrogel for 3D Bioprinting

Bio-ink has gradually transited from ionic-crosslinking to photocrosslinking due to photocurable bio-hydrogel having good formability and biocompatibility. It is very important to understand and quantify the crosslinking process of photocurable hydrogels, otherwise, bioprinting cannot be standardized and scalable. However, there are few studies on hydrogel formation process and its photocrosslinking behavior which cannot be accurately predicted. Herein, the photoinitiated radical polymerized bio-hydrogels are taken as an example to establish the formation theory. Three typical crosslinking reactions are first distinguished. It is further proposed that not all double-bonds consumed during crosslinking contributeequally to polymerization. Then the concept of effective double-bond conversion (EDBC) is elicited. Deriving from EDBC, several important formation indices are defined. According to theory, it is predicted that slow crosslinking can improve the crosslinking degree. Furthermore, based on the slow crosslinking effect, a new strategy of projection-based 3D printing (PBP) is proposed, which significantly improved printing quality and efficiency. Overall, this work will fill the gap in hydrogel's formation theory, making it possible to accurately quantify the formation process.