Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.     

Two-step parameter extraction procedure with formal optimization for physics-based circuit simulator IGBT and p-i-n diode models

A practical and accurate parameter extraction method is presented for the Fourier-based-solution physics-based insulated gate bipolar transistor (IGBT) and power diode models. The goal is to obtain a model accurate enough to allow switching loss prediction under a variety of operating conditions. In the first step of the extraction procedure, only one simple clamped inductive load test is needed for the extraction of the six parameters required for the diode model and of the 12 and 15 parameters required for the nonpunch-through (NPT) and punch-through (PT) IGBT models, respectively. The second part of the extraction procedure is an automated formal optimization step that refines the parameter estimation. Validation with experimental results from various structures of IGBT demonstrates the accuracy of the proposed IGBT and diode models and the robustness of the parameter extraction method.     

A new loss recovery architecture for wireless TCP

The loss recovery architecture of TCP under wireless environment is considered. We propose sent-time ordered two lists architecture as an alternative to sequence number ordered single list architecture. By keeping the sent-time order, the recovery mechanism can be more efficient and-simpler and transmission decision is decoupled from loss recovery using the second list. Simulation results show the superiority of our mechanism.     

Name‐Based Autoconfiguration for Mobile Ad hoc Networks

In a mobile ad hoc network, difficulties exist in supporting address autoconfiguration and naming resolution due to the lack of centralized servers. This letter presents a novel approach, called name‐based autoconfiguration (NBA), which uses host names to determine IP addresses and provides address autoconfiguration and name resolution as a single protocol.     

Statistical properties of out-of-frame detection schemes fordigital transmission systems

The importance of the misframe times for DS1 frame synchronization has often been addressed in designing and using network elements and mediation units. By extending the work of J. H. Eu and W. W. Rollins (1991), Markov chain first passage time analysis is used to derive higher moments of the misframe times in both random and burst error environments. This methodology is of great value in evaluating frame synchronization techniques for digital transmission systems. By experimenting with several out-of-frame detection schemes and reasonable values for bit error ratio (BER), it is shown that misframe times are always approximately exponentially distributed for all schemes     

Parasitic Bipolar Junction Transistors in a Floating-Gate MOSFET for Fluorescence Detection

In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector.     

A novel bidirectional CMOS transceiver for chip-to-chip optical interconnects

A novel bidirectional complementary metal-oxide-semiconductor (CMOS) transceiver for chip-to-chip optical interconnects operating at 2.5 Gb/s is proposed, which shares the common block of a receiver and a transmitter on a single chip. The share of the common block of two circuits makes it possible to save 55% or 20% of power dissipation, depending on the operating mode. The chip in 0.18-/spl mu/m CMOS technology occupies an area of 0.82/spl times/0.82 mm/sup 2/, 70% of the total area of a typical unshared transceiver chip. The transmitting and receiving modes of operation show -3-dB bandwidths of 2.2 and 2.4 GHz and electrical isolations of -28 and -40 dB, respectively.     

Growth of single-crystal magnetite nanowires from Fe3O4 nanoparticles in a surfactant-free hydrothermal process

Single-crystal magnetite nanowires with average diameter of ca. 20 nm and length of up to several micrometers were prepared by a simple alkaline surfactant-free hydrothermal process. The crystallinity, purity, morphology, and structural features of the as-prepared magnetite nanowires were investigated by powder X-ray diffraction, transmission electron microscopy (TEM) and selected area electron diffraction. The composition and length of nanowires depends on the pH, with higher pH favoring longer nanowires composed entirely of Fe₃O₄. A mechanism for nanowire growth is proposed.     

Destination-driven routing for low-cost multicast

We present a destination-driven algorithm that optimizes for applications, such as group video or teleconferencing, that require multicast trees with low total cost. The destination-driven algorithm uses a greedy strategy based on shortest-path trees and minimal spanning trees but biases routes through destinations. The performance of the algorithm is analyzed through extensive simulation and compared with several Steiner tree heuristics and the popular shortest-path tree (SPT) method. The algorithm is found to produce trees with significantly lower overall cost than the SPT while maintaining reasonable per-destination performance. Its performance also compares well with other known Steiner heuristics. Moreover, the algorithm does not suffer from high complexity common to most Steiner tree heuristics and builds a route by querying only incident links for cost information     

遗传程序设计中分布式染色体的一个应用

对一类遗传程序设计问题，提出了简单等长的分布式染色体，取代复杂变长的树结构染色体，使演化算子操作更方便，个体复杂度得到有效控制．用该染色体形式解决割草问题，分析了分布式染色体带来的一些性质，并给出了很好的计算结果．