The unusual stability of H-bonded complexes in solvent caused by greater solvation energy of complex compared to those of isolated fragments

Here, the effect of solvent on the stability of non-covalent complexes, was studied. These complexes were from previously published S22, S66, and X40 datasets, which include hydrogen-, halogen- and dispersion-bonded complexes. It was shown that the charge transfer in the complex determines whether the complex is stabilized or destabilized in solvent.     

Some cyclization reactions of 1,3-diphenylbenzo[e][1,2,4]triazin-7(1H)-one: preparation and computational analysis of non symmetrical zwitterionic biscyanines

Regioselective nucleophilic addition of bisnucleophiles 1,2-benzenediamine, 2-amino-benzenethiol, and N-phenyl-1,2-benzenediamine to 1,3-diphenylbenzo[e][1,2,4]triazin-7(1H)-one (1) at C6 followed by intramolecular cyclocondensation at the C7 carbonyl afforded highly coloured tetracenes 1,3-diphenyl-1,6-dihydro-[1,2,4]triazino[5,6-b]phenazin-4-ium 4-methylbenzenesulfonate (12), 1,3-diphenyl-1H-[1,2,4]triazino[6,5-b]phenothiazine (14) and 1,3,11-triphenyl-1,6-dihydro-[1,2,4]triazino[5,6-b]phenazin-11-ium 4-methylbenzenesulfonate (15), respectively. Neutralization of the latter with alkali gave the free base 1,3,11-triphenyl-1H-[1,2,4]triazino[5,6-b]phenazin-11-ium-6-ide (16). Furthermore, the benzotriazinone 1 reacts with dimethyl malonate to give 6-(methoxycarbonyl)-7-oxo-1,3-diphenyl-7H-benzofuro[5,6-e][1,2,4]triazin-1-ium-4-ide (17) in 74% yield, while with S(4)N(4) [5,6-c]-thiadiazolo-7-oxo-1,3-diphenyl-1,2,4-benzotriazine (22) was formed in 15% yield. The free bases 16 and 17 display negative solvatochromism, which supports charge separated ground states similar to those of zwitterionic biscyanines, and DFT calculations at the UB3LYP/6-31G(d) level afford ΔE(ST) values of -13.6 and -18.7 kcal mol(-1), respectively that strongly favour the singlet ground state. All ring systems described are new and fully characterized.     

The design and synthesis of novel IBiox N-heterocyclic carbene ligands derived from substituted amino-indanols

A synthetic route towards a number of novel IBiox N-heterocyclic carbene (NHC) ligands has been developed. The resulting ligands have restricted flexibility and high steric demand. Preliminary studies have shown these ligands to give high levels of asymmetric induction in the copper-free allylic alkylation of cinnamyl bromide.     

Toxicity study of allelochemical-like pesticides by a combination of 3D-QSAR, docking, Local Binding Energy (LBE) and GRID approaches

3D-QSAR, Docking, Local Binding Energy (LBE) and GRID methods were integrated as a tool for predicting toxicity and studying mechanisms of action. The method was tested on a set of 73 allelochemical-like pesticides, for which acute toxicity (LD(50)) for the rat was available. 3D-QSAR gave a model with high predictive ability and the regression maps indicated the important toxic chemical substituents. Significant ligand-protein residue interactions and oxidation positions in the binding site were found by docking analysis using CYP1A2 homology modelling. The binding energies of the compounds and the important substituents (Local Binding Energy, LBE) were calculated in order to demonstrate quantitatively the substituent contributions in the metabolism and toxicity. The GRID examination identified the CYP1A2 binding pocket feature. Finally, a 3D-QSAR map was compared to the GRID map, showing good overlaps and confirming the important role of CYP1A2 in allelochemical-like compounds toxicity.     

Direct determination of kallikrein by high-performance liquid chromatography.

A direct and specific identification of porcine pancreatic kallikrein by high-performance hydrophobic chromatography is proposed; the minimum amount which can be injected is 2.5 U. An application to the quantitative determination of the enzyme by high-performance size-exclusion chromatography is reported; the method is precise with a mean coefficient of variation of 2.8% and the minimum amount which can be injected is 0.02 U of kallikrein. The results obtained with determinations in real biological samples (porcine pancreatic powder and human urine) are reported. The method is based on direct and specific chromatographic signals and does not destroy the biological activity of this enzyme.     

Removal and recovery of copper (II) ions by bacterial biosorption

Studies were conducted toinvestigate the removal and recovery of copper (II) ions from aqueous solutions by Micrococcus sp., which was isolated from a local activated sludge process. The equilibrium of copper biosorption followed the Langmuir isotherm model very well with a maximum biosorption capacity (q_max) of 36.5 mg of Cu²⁺/gofdry cell at pH 5.0 and 52.1 mg of Cu²⁺/g of dry cell at pH 6.0. Cells harvested at exponential growth phase and stationary phase showed similar biosorption characteristics for copper, Copper uptake by cells was negligible at pH 2.0 and then increased rapidly with increasing pH un til 6.0. In multim etal systems, Micrococcus sp. exhibited a preferential biosorption order: Cu−Pb>Ni−Zn. There is virtually no interference with copper uptake by Micrococcus sp. from solutions bearing high concentrations of Cl⁻, SO ₄ ²⁻ , and NO3/− (0–500 mg/L). Sulfuric acid (0.05 M) was the most efficient desorption medium, recovering >90% of the initial copper sorbed. The copper capacity of Micrococcus sp. remained unchanged after five successive sorption and desorption cycles. Immobilization of Micrococcus sp. in 2% calcium alginate and 10% polyacrylamide gel beads increased copper uptake by 61%. Biomass of Micrococcus sp. may be applicable to the development of potentially cost-effective biosorbent for removing and recovering copper from effluents.     

A Lead Iodide Perovskite Based on a Large Organic Cation for Solar Cell Applications

Methylammonium (CH₃NH₃⁺) and formamidinium ((NH₂)₂CH⁺) based lead iodide perovskites are currently the two commonly used organic–inorganic lead iodide perovskites. There are still no alternative organic cations that can produce perovskites with band gaps spanning the visible spectrum (that is, <1.7 eV) for solar cell applications. Now, a new perovskite using large propane‐1,3‐diammonium cation (1,3‐Pr(NH₃)₂²⁺) with a chemical structure of (1,3‐Pr(NH₃)₂)_0.5PbI₃ is demonstrated. X‐ray diffraction (XRD) shows that the new perovskite exhibits a three‐dimensional tetragonal phase. The band gap of the new perovskite is about 1.6 eV, which is desirable for photovoltaic applications. A (1,3‐Pr(NH₃)₂)_0.5PbI₃ perovskite solar cell (PSC) yields a power conversion efficiency (PCE) of 5.1 %. More importantly, this perovskite is composed of a large hydrophobic cation that provides better moisture resistance compared to CH₃NH₃PbI₃ perovskite.     

Intramolecular [2 + 2]-photocycloaddition/thermal fragmentation approach toward 5-8-5 ring systems

[reaction: see text]. An intramolecular [2 + 2]-photocycloaddition is used to provide a photoadduct, which upon fragmentation, lactone cleavage, and subsequent Cope rearrangement provides a dicyclopenta[a,d]cyclooctene ring system with substituents in place (e.g., C3 and C11) to access several 5-8-5 diterpene and sesterterpene natural products.     

Synthesis of 2-quinolinecarboxamide derivatives as potential HDAC inhibitors

Inhibition of histone deacetylase activity appears as an original and effective approach for the treatment of cancer. A series of novel quinoline-containing derivatives has been synthesized and found that some of these compounds possess nanomolar histone deacetylase inhibitory activity.     

Ruthenium-catalyzed oxidation of a carbon-carbon triple bond: facile syntheses of alkenyl 1,2-diketones from alkynes

A new oxidation procedure of alkynes catalyzed by Tp(PPh(3))(CH(3)CN)Ru-Cl is presented, which provides an efficient way to obtain alkenyl 1,2-diketones via ruthenium alkenyl 1,2-diketone intermediates. In contrast, the analogous reactions with Tp(PPh(3))(PhCN)Ru-Cl gave rise to the ruthenium metallacycle complexes.