Design and end chamfer simulation of PEFP beam line curved dipole magnets

The design, fabrication and field measurement of 11 DC curved dipole magnets for the PEFP Beam Line have been completed. In this paper, a design method for a complex end chamfer using OPERA-3D is proposed. The conventional method for estimating chamfer shape is extended and applied to a curved dipole magnet by a coordinate transformation. Using the interface with CAD software, the complex end chamfer is modeled and fully determined by 3D simulation to meet the field uniformity requirement. The magnetic field measurement results are in good agreement with the simulation. The design considerations, field simulation results, end chamfer development process and measurement results are presented in detail.     

红色荧光粉NazCa1-x-2y-zBiyMoO4∶Eu3+x+y发光研究

采用高温固相法制备系列红色荧光粉Naz Ca1-x-2y-zBiyMoO4 ∶ Eu3+x+y (y,z=0,x=0.24,0.26,0.30,0.34,0.38; x=0.30,y=0.01,0.02,0.03,0.04,0.05,0.06,0.07,z=0; x=0.30,y=0.04,z=0.38).用X射线粉末衍射(XRD)法测试了所制样品晶相结构.采用荧光光谱仪对样品的发光性能进行了表征,结果表明:当Eu3+单掺杂量浓度x=0.30时,荧光粉(Ca0.70 MoO4∶Eu3+0.30)的发光强度最强;当Eu3+-Bi3+共掺杂量浓度y=0.03时,电荷迁移带(CTB)强度达到最强,而对于Eu3+特征发射峰,当共掺杂浓度y＜0.03时,位于393 nm处的激发峰强度比464 nm强,共掺浓度y＞0.03时,464 nm峰比393 nm峰强,共掺浓度为y=0.04时,393和464 nm处两峰位置强度都达到最强.作为电荷补尝剂的Na2 CO3掺入上述荧光粉中后,荧光粉激发和发射强度明显地增强.结果表明,通过调节Bi3+ /Eu3+掺杂比例可以改变位于近紫外光393 nm和蓝光区464 nm处激发光相对强度.     

How Do Cultural Classes Emerge from Assimilation and Distinction? An Extension of the Cucker-Smale Flocking Model

When cultural tastes are not neutral but hierarchically matched to social status, people assimilate themselves to higher status by consuming cultural goods while distinguishing themselves from lower status by developing new tastes. Extending the Cucker-Smale model for mutual influence among agents, we examine when and how many cultural classes emerge from continuous distributions of tastes and what conditions those classes satisfy, through the assimilation-distinction mechanism. We simulate the models with different initial distributions of tastes (uniform, normal, and chi-square), given various ranges of 2 parameters: (a) the strength and (b) the range of distinction relative to assimilation. Tastes are flocking and cultural classes emerge when the range of assimilation is much larger than that of distinction. The number of classes increases with the strength of distinction, whereas the distance between classes equals the range of distinction. Some properties of emergent classes are mathematically proved. First, in a two-class system, the stronger distinction, the larger the upper class. Second, in a three-class system, the middle class is necessarily larger than the lower class and likely larger than the upper class. Third, a 3-class system cannot emerge if distinction is weaker than assimilation. These properties are universal and do not depend on the initial distribution of cultural tastes. This independence predicts homogeneous cultural classes emerging across different social conditions. Also, the cultural middle class as the largest group may explain why subjective class consciousness is often higher than objective position. Unless assimilating efforts can reach an infinite range, there emerges a cultural outcast at the lowest end of the cultural hierarchy.     

人工扰动电离层仿真系统的设计与实现

设计并开发了一种人工扰动电离层仿真系统．建立了数值模型，规划出系统总体构造，在实现过程中引入VC、VF混合编程的概念，以达到两种语言优势互补的目的．文中详细论述了VC、VF混合编程对于数据的处理，生成Fortran的动态链接库，以及在VC中调用生成库的技术．通过仿真模拟，得出了电离层加热过程中电子密度、电子温度等随时间演化的规律，及发射电波频率、功率对加热效果的影响．试用证明，该系统有效地模拟了电离层人工扰动的状态，为在我国实施加热工程提供了可靠的科学依据．     

EV-DO RevB的技术特点及组网建议

介绍了EV-DO RevB技术两个阶段的不同特点和优势,阐述了在EV-DO RevB网络升级的策略,并针对热点、室内、郊区等不同的场景提出了Ev-DO RevB进行网络部署的组网建议.     

中国西北地区沙尘暴的发生规律研究

借助MATLAB软件,根据中国西北地区六个省份1981～2005年沙尘暴发生天数、月平均风速、大风发生天数、月平均气温、月降水量、月平均相对湿度的统计数据,研究中国西北地区沙尘暴的区域分布和时间分布规律及其与气象因子的关系.方差分析结果表明:西北地区沙尘暴危害程度省份差异不显著,不同观测站所在地沙尘暴危害程度的差异显著,不同月份沙尘暴危害程度的差异也显著;聚类分析结果表明:拐子湖等站点所在地受沙尘暴危害最严重,各年4月份受沙尘暴危害最严重,北京地区8月份几乎不发生沙尘暴;相关分析结果表明:西北地区沙尘暴的气候影响因子为月平均风速、月大风发生天数和月相对湿度.由回归分析得到,沙尘暴每月发生天数y随月份t的变化规律为正态分布.研究结果可供有关部门参考.     

Ultrasonic guided wave inspection with array sensors

Ultrasonic guided wave becomes one of promising tool for monitoring various types of structures such as large steel plates, vessels, and pipes in oil, chemical or nuclear industry, because guided waves have ability to travel wide range of the target structure in a single position. However, analysis of guided wave signals acquired from structure is difficult on account of low S/N ratio and its dispersive nature. To improve S/N ratio and overcome dispersion effect, focusing techniques for guided waves are needed. Thus, in this study, focusing techniques for guided waves were developed in order to improve long range inspection ability, and performance of the developed techniques was verified by experiments.     

λKv的最大K2,3填充设计和最小K2,3覆盖设计

对于一个有限简单图G,λK_v的G-设计(G-填充,G-覆盖),记为(v,G,λ)-GD((v,G,λ)-PD,(v,G,λ)-CD),是一个(X,B),其中X是K_v的顶点集,B是K_v的子图族,每个子图(称为区组)均同构于G,且K_v中任一边都恰好(最多,至少)出现在B的λ个区组中.一个填充(覆盖)设计称为是最大(最小)的,如果没有其它的这种填充(覆盖)设计具有更多(更少)的区组.本文对于λ>1确定了(v,K_2,3,λ)-GD的存在谱,并对任意λ构造了λK_v的最大K_2,3-填充设计和最小K_2,3-覆盖设计.