Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Metal-catalyzed di-tert-butylsilylene transfer: synthesis and reactivity of silacyclopropanes

Metal-catalyzed di-tert-butylsilylene transfer was developed as a mild, operationally simple, functional-group-tolerant method for silacyclopropane formation. Di-tert-butylsilylene was transferred from cyclohexene silacyclopropane 1 to an alkene through the use of a metal salt. Silacyclopropanation occurred at temperatures as low as -27 degrees C when AgOTf or AgOC(O)CF(3) were used as catalysts. Complex silacyclopropanes were formed stereospecifically and diastereoselectively from functionalized alkenes. Silacyclopropanes reacted with various carbonyl compounds, including aldehydes, ketones, formate esters, and formamides, in an overall process that efficiently converts alkenes into oxasilacyclopentanes with defined stereochemistry.     

Catalytic enantioselective 1,3-dipolar cycloaddition reactions of cyclic nitrones: a simple approach for the formation of optically active isoquinoline derivatives

The first highly diastereo- and enantioselective catalytic 1, 3-dipolar cycloaddition reaction of cyclic nitrones activated by chiral Lewis acids with electron-rich alkenes has been developed. The nitrones, mainly 3,4-dihydroisoquinoline N-oxides, are activated by chiral 3,3'-aryl BINOL-AlMe complexes and undergo a regio-, diastereo-, and enantioselective 1,3-dipolar cycloaddition reaction with especially alkyl vinyl ethers, giving the exo diastereomer of the cycloaddition products in high yield, >90% de and up to 85% ee. The reaction has been investigated under various conditions, and it is demonstrated that the reaction is an attractive synthetic procedure for the introduction of a chiral center in the 1-position of the isoquinoline skeleton. The mechanism of the reaction is discussed on the basis of the assignment of the absolute configuration of the cycloaddition product and theoretical calculations.     

Direct observation of insertion events at rac-(C2H4(1-indenyl)2)Zr(MeB(C6F5)3)-polymeryl intermediates: distinction between continuous and intermittent propagation modes

The propagating species for 1-hexene, propene, and ethene polymerization as catalyzed by [rac-(C2H4(1-indenyl)2)Zr(CH3)][CH3B(C6F5)3] has been intercepted at T < -40 degrees C and characterized by NMR methods. Observation of the propagating species permits direct monitoring of initiation, propagation, and termination processes by NMR. Detailed examination of alkene incorporation into Zr-polymeryl species using 13C-labeled 1-alkenes supports a continuous insertion mechanism whereby the anion re-coordinates after each alkene insertion.     

Size-selected (2-10 nm) gold nanoparticles for matrix assisted laser desorption ionization of peptides

In this report, first use of size-selected gold nanoparticles (AuNPs) as matrixes for matrix assisted laser desorption/ionization (MALDI) is described for peptides and proteins. In comparison with conventional organic acid MALDI matrixes, the optimum matrix-to-analyte ratio with AuNP matrixes is reduced by 10-14 orders of magnitude. Significant differences in the relative abundances of the ions observed in positive and negative mode MALDI-time-of-flight mass spectrometry (TOFMS) are revealed as the AuNP size distribution is decreased from 10 to 2 nm, whereby 2-nm AuNPs exhibit quantum confinement effects prevalent in quantum dots. AuNP matrixes allow for selective analyte ionization, as demonstrated in the selective MALDI-TOFMS of phosphotyrosine in a background of phosphoserine and phosphothreonine peptides.     

Separation and determination of biphenyl nitrile compounds by microemulsion electrokinetic chromatography with mixed surfactants

A mixture of six biphenyl nitrile compounds and three related substances with high hydrophobicity and similar structures was successfully separated by microemulsion electrokinetic chromatography (MEEKC) within 30 min. The microemulsion system contained 100 mM sodium dodecyl sulfate (SDS), 80 mM sodium cholate (SC), 0.81% v/v heptane, 7.5% v/v n-butanol, 10% v/v acetonitrile, and 10 mM borate. The addition of SC, organic modifiers, sample preparation, and temperature all showed remarkable effects on the separation. The capacity factor (k) was calculated by using dodecyl benzene as the marker for microemulsion, and the calculated partition coefficient log P(o/w) of the solutes was in the range of 3.35-7.38. The log k values matched well with the log P(o/w) with a correlation coefficient of 0.96. In addition, the linear correlation coefficients of each compound between peak area and concentration were from 0.996 to 0.998 with the repeatability RSD value < 1.2% for migration time and < 4.8% for peak area, and the highest theoretic plate number was > 586000. MEEKC was compared with micellar electrokinetic chromatography (MEKC) indicating that the former method is more suitable for this separation and can be used for the quality control of biphenyl nitrile compounds in the synthesis of liquid crystals.     

Bis(m-phenylene)-32-crown-10-based cryptands, powerful hosts for paraquat derivatives

Four new bis(m-phenylene)-32-crown-10-based cryptands with different third bridges were prepared. Their complexes with paraquat derivatives were studied by proton NMR spectroscopy, mass spectrometry, and X-ray analysis. It was found that these cryptands bind paraquat derivatives very strongly. Specifically, a diester cryptand with a pyridyl nitrogen atom located at a site occupied by either water or a PF(6) anion in analogous complexes exhibited the highest association constant K(a) = 5.0 x 10(6) M(-1) in acetone with paraquat, 9000 times greater than the crown ether system. X-ray structures of this and analogous complexes demonstrate that improved complexation with this host is a consequence of preorganization, adequate ring size for occupation by the guest, and the proper location of the pyridyl N-atom for binding to the beta-pyridinium hydrogens of the paraquat guests. This readily accessible cryptand is one of the most powerful hosts reported for paraquats.     

Step-scan FTIR time-resolved spectroscopy study of excited-state dipole orientation in soluble metallopolymers

Step-scan FTIR time-resolved spectroscopy (S2FTIR TRS) in acetonitrile-d3 has been used to probe the acceptor ligand in metal-to-ligand charge transfer (MLCT) excited states of amide-substituted polypyridyl complexes of RuII and in analogues appended to polystyrene. On the basis of ground-to-excited state shifts in v(C = O) of -31 cm-1 for the amide group in [RuII(bpy)2(bpyCONHEt')]2+ (bpyCONHEt' = 4'-methyl-2,2'-bipyridine-4-carboxamide-Et'; Et' = -CH2CH2BzCH2CH3) (1) and in the derivatized polystyrene abbreviated [PS-[CH2-CH2NHCObpy-RuII(bpy)2]20]40+ (3), the excited-state dipole is directed toward the amide-containing pyridyl group in the polymer side chain. Smaller shifts in v(C = O) of -17 cm-1 in [RuII(4,4'-(CONEt2)2bpy)2-(bpyCONHEt')]2+ (2) and in the derivatized polystyrene abbreviated [PS-[CH2CH2NHCObpy-RuII(4,4'-(CONEt2)2bpy)2]20]40+ (4) indicate that the excited-state dipole is directed toward one of the diamide bpy ligands. The nearly identical results for 1 and 3 and for 2 and 4 show that the molecular and electronic structures of the monomer excited states are largely retained in the polymer samples. These conclusions about dipole orientation in the polymers are potentially of importance in understanding intrastrand energy transfer dynamics. The excited-state dipole in 3 is oriented in the direction of the covalent link to the polymer backbone, and toward nearest neighbors. In 4, it is oriented away from the backbone.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Fragmentation of N-linked glycans with a matrix-assisted laser desorption/ionization ion trap time-of-flight mass spectrometer

N-Linked glycans were ionized from several matrices with a Shimadzu-Biotech AXIMA-QIT matrix-assisted laser desorption/ionization quadrupole ion trap time-of-flight mass spectrometer. [M+Na]+ ions were produced from all matrices and were accompanied by varying amounts of in-source fragmentation products. The least fragmentation was produced by 2,5-dihydroxybenzoic acid and the most by alpha-cyano-4-hydroxycinnamic acid and 6-aza-2-thiothymine. Sialic acid loss was extensive but could be prevented by formation of methyl esters. Fragmentation produced typical low-energy-type spectra dominated by ions formed by glycosidic cleavages. MS(n) spectra (n = 3 and 4) were used to probe the pathways leading to the major diagnostic ions. Thus, for example, an ion that was formed by loss of the core GlcNAc residues and the 3-antenna was confirmed as being formed by a B/Y rather than a C/Z mechanism. The proposed structures of several cross-ring cleavage ions were confirmed and it was shown that MS3 spectra could be obtained from as little as 10 fmol of glycan.