Nonlinear self-guiding and switching in an all-fiber device

We study the nonlinear propagation of light in optical fibers in the strong nonlinearity limit. In this limit, the transverse guiding properties are altered and cannot be decoupled from the longitudinal part of the wave equation. We consider a refractive index profile with no bound modes at low intensities and show that stable self-guiding occurs at a critical intensity. This critical intensity is a property of the guide and can be made much lower than the threshold for unstable self-focusing. We consider a particular design for which self-guiding occurs at three orders of magnitude lower than the self-focusing threshold.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

Elastic-stress relaxation in heteroepitaxial structures investigated by computer simulation

Atomic mechanisms of elastic-stress relaxation in heteroepitaxial structures are investigated by computer simulation. A 2D model of a heteroepitaxial structure with an empirical interatomic potential is considered. Advanced methods of saddle-point search in a multidimensional space are used to identify main mechanisms of structural change involving the formation of a structural imperfection, and to estimate energy characteristics of the processes.     

Catalytic properties of composite amorphous carbon-platinum layers in fuel cells

Catalytic properties of composite amorphous carbon-platinum layers produced by magnetron cosputtering have been studied. The layers were characterized by electron microscopy, IR spectroscopy, ellipsometry, gravimetry, and spectrophotometric chemical analysis. The catalytic activity of the layers was studied in an air-hydrogen fuel cell by measuring its load and power characteristics.     

Ultrafast IR Laser Writing of Strong Bragg Gratings Through the Coating of High Ge-Doped Optical Fibers

Strong fiber Bragg gratings were written through the standard polymer coatings of "off-the-shelf" high numerical aperture single-mode optical fibers after a few seconds exposure with femtosecond pulse durations of infrared radiation through a phase mask. While writing through the acrylate coating, we obtained index modulations of up to 1.4 x 10^-3 and 7 x 10^-4 with and without H₂ -loading, respectively.     

DefibViz: A Visualization Tool for the Assessment of Electrode Parameters on Transthoracic Defibrillation Thresholds

DefibViz is a software application developed for defibrillation simulation and visualization. It exploits both surface techniques and methods for the interactive exploration of volumetric datasets for the analysis of transthoracic defibrillation simulation results. DefibViz has a graphical user interface for the specification of the shape, size, position, and applied voltage of a defibrillator's electrodes. An option is provided for using 3D slice plane widgets, which operate on the volumetric datasets, such that the distribution of the voltage gradient induced by an electric shock can be visually inspected in various tissues throughout the myocardium and torso. One goal of DefibViz is to enhance understanding of how electrode parameters relate to the change of the voltage gradient distribution throughout the heart, which may help lead to optimal defibrillator design. DefibViz is significant, in that, it is built by using an open-source graphics and visualization framework providing a platform for subsequent modifiability and extensibility. Moreover, it integrates simulation and visualization techniques, which previously required the running of several independent software executables, into an enhanced, seamless, and comprehensive software application.     

BioFET sensor for detection of albumin in urine

Characterisation of a BioFET for detection of albumin in a mixture of human urine is presented. To avoid electrolyte effect of the urine, it was measured in PBS (phosphate buffer saline) at a fixed pH after albumin binding. The drain current was modulated by the albumin bound to the anti-albumin immobilised on the gate surface of the BioFET. The current variation ratio was likely to be proportional to the concentration of the albumin in the range 50-250 mg/1. The results show the feasibility of the BioFET as a urinary albumin sensor.     

Studies on calcium‐containing poly(urethane ether)s

The calcium salt of mono(hydroxyethoxyethyl)phthalate [Ca(HEEP)₂] was synthesized by the reaction of diethylene glycol, phthalic anhydride, and calcium acetate. Calcium‐containing poly(urethane ether)s (PUEs) were synthesized by the reaction of hexamethylene diisocyanate (HMDI) or tolylene 2,4‐diisocyanate (TDI) with a mixture of Ca(HEEP)₂ and poly(ethylene glycol) (PEG₃₀₀ or PEG₄₀₀) with di‐n‐butyltin dilaurate as a catalyst. A series of calcium‐containing PUEs of different compositions were synthesized with Ca(HEEP)₂/PEG₃₀₀ (or PEG₄₀₀)/diisocyanate (HMDI or TDI) molar ratios of 2:2:4, 3:1:4, and 1:3:4 so that the coating properties of the PUEs could be studied. Blank PUEs without calcium‐containing ionic diols were also prepared by the reaction of PEG₃₀₀ or PEG₄₀₀ with HMDI or TDI. The PUEs were well characterized by Fourier transform infrared, ¹H and ¹³C NMR, solid‐state cross‐polarity/magic‐angle‐spinning ¹³C NMR, viscosity, solubility, and X‐ray diffraction studies. The thermal properties of the polymers were also studied with thermogravimetric analysis and differential scanning calorimetry. The PUEs were applied as top coats on acrylic‐coated leather, and their physicomechanical properties were also studied. The coating properties of PUEs, such as the tensile strength, elongation at break, tear strength, water vapor permeability, flexing endurance, cold crack resistance, abrasion resistance, color fastness, and adhesive strength, were better than the standard values. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2865–2878, 2003     

Inclusions of carbon in ingots of silicon carbide grown by the modified Lely method

The problem of the appearance of carbon inclusions in single-crystal silicon carbide ingots grown by the modified Lely method (the so-called graphitization of the ingot) is analyzed. It is shown that the process of graphitization of the ingot is not related to a deficit of silicon in the growth cell; in contrast, it is excess of silicon at the growth surface that inhibits the ingot growth rate and gives rise to intense corrosion of the graphite fittings.     

Audio Denoising by Time-Frequency Block Thresholding

Removing noise from audio signals requires a nondiagonal processing of time-frequency coefficients to avoid producing ldquomusical noise.rdquo State of the art algorithms perform a parameterized filtering of spectrogram coefficients with empirically fixed parameters. A block thresholding estimation procedure is introduced, which adjusts all parameters adaptively to signal property by minimizing a Stein estimation of the risk. Numerical experiments demonstrate the performance and robustness of this procedure through objective and subjective evaluations.