Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

Investigations of backscattering peaks and of the nature of the confining potential in open quantum dots

The properties of open quantum dots are examined in magneto-transport. The quantum dots are prepared from a two-dimensional electron system (2DES) in AlGaAs/GaAs by lateral gate structures. These quantum dots are open, i.e. they are still connected to the surrounding 2DES regions. The low magnetic field magnetoresistance shows peak structures. These structures can be related to semi-classical ballistic trajectories in the confining potential of a dot. The calculations of different confining potentials (abrupt “hard-wall” and parabolic “soft-wall”) are compared with the experimental results. The experiments are better described by a soft-wall potential.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

There does not exist an enumerable family of context-free grammars that generates the class of single-valued languages

Translated from Matematicheskie Zametki, Vol. 50, No. 1, pp. 34–40, July, 1991.     

Availability of systems with partially observable failures

The availability is determined for the following kind of system. When the system is operational (up), it can fail in either one of two modes. However, the system operator does not always diagnose the failure mode correctly. Given that one failure mode has occurred, the authors correctly diagnose the failure mode with a given probability η and misdiagnose it with probability 1-η, where η may vary with failure mode. The problem is modeled by a partially observable Markov process. Numerical results indicate that a high probability of misdiagnosis produces appreciably high system-downtime     

A Finite Element Galerkin Method for a Unidimensional Single-Phase Nonlinear Stefan Problem with Dirichlet Boundary Conditions

Based on straightening the free boundary, an H¹-Galerkin methodis proposed and analysed for a single-phase nonlinear Stefanproblem with Dirichlet boundary conditions. Optimal H¹ estimatesfor continuous-time Galerkin approximations are derived.     

Dynamic bandwidth control of the virtual path in an asynchronoustransfer mode network

The virtual path concept has several valuable features to construct an economical and efficient asynchronous transfer mode (ATM) network. One of them is bandwidth control which affords transmission efficiency improvement through statistical sharing of capacity. An effective bandwidth control algorithm and its calculated performance are described. Network performance with the algorithm is evaluated, and the bandwidth control is shown to successfully improve network transmission efficiency with only a slight increase in processing load compared to the fixed bandwidth scheme. A method is also proposed to equalize call loss probability for each virtual path. The effectiveness of the method is demonstrated by analysis     

The effect of the external lateral electric field on the luminescence intensity of InAs/GaAs quantum dots

We report on low-temperature microphotoluminescence (μ-PL) measurements of InAs/GaAs quantum dots (QDs) exposed to a lateral external electric field. It is demonstrated that the QDs’ PL signal could be increased severalfold by altering the external and/or the internal electric field, which could be changed by an additional infrared laser. A model which accounts for a substantially faster lateral transport of the photoexcited carriers achieved in an external electric field is employed to explain the observed effects. The results obtained suggest that the lateral electric fields play a major role for the dot luminescence intensity measured in our experiment—a finding which could be used to tailor the properties of QD-based optoelectronic applications. The text was submitted by the authors in English.     

Interference inspection of the aspherical components of an objective for nanolithography

Methods and schemes to inspect the EUV mirror shape are developed on the basis of a point diffraction interferometer with computer processing of interferograms. A measurement accuracy to within 0.001 of a wavelength in the visual range is achieved.