Design of a Very Small Residual Dispersion Fiber System for DWDM Operation Over the Entire C - & L- Bands of EDFA

We have given design of a very small residual dispersion fiber system consisting of a small dispersion fiber(SDF) with flat modal field and a corresponding dual core coaxial dispersion compensating fiber (DCF).     

Differentiation between tracks and damages in SSNTD under the atomic force microscope

We have observed three-dimensional sponge-like structures as well as strips of connecting pits on the surface of the LR 115 detector after etching, which can be confused with the small tracks formed after short etching time. We have employed an atomic force microscope (AFM) to study these “damages” as well as genuine alpha tracks for short etching time. It was found that while the track and damage openings could be similar in size and shape, the depths for the damages were consistently smaller. Therefore, the depth of the pits will serve as a clear criterion to differentiate between tracks and other damages. The ability to discriminate between genuine tracks from other damages is most important for etching for short time intervals.     

Phase and amplitude comparison between experiment and calculation of ultrabroad-band pulses generated in a taper fiber

Using a cross-correlation frequency-resolved optical gating apparatus, the phases and amplitudes of ultrabroad-band optical pulses from a taper fiber have been measured for various input pulse peak powers. The measured waveforms have been compared with calculated waveforms using a finite-difference in the frequency domain method, in which no envelope approximations were used and the variation of the taper shape was taken into account. Excellent agreement between the measured and the calculated waveforms was obtained when the additional dispersion of a normal fiber and an objective was considered.     

Extracting electrical material parameters of electrically large dielectric objects from reverberation chamber measurements of absorption cross section

Reverberation chambers can be used to measure the absorption cross section of a dielectric object. The absorption cross section of a dielectric object depends on its size, shape, and electrical material parameters. By comparing with a theoretical model of the absorption cross section, material parameters can be extracted from measurements. A model based on a plane wave approach of incident fields is used here, valid for electrically large material samples in an isotropic environment such as that in a reverberation chamber. Which material parameter can be extracted depends on the properties of the material sample. The presented method combines the accuracy of cavity methods with the flexibility of being able to measure samples of arbitrary size and shape. Because both the reverberation chamber and the material sample are electrically large, the method is particularly useful at millimeter-wave frequencies.     

Measured equation of invariance with linear tensor relation for three-dimensional scattering problems

The postulate of a linear tensor relation in the measured equation of invariance (MEI) is proposed for three-dimensional (3D) problems. As a result, all three components of the field vector to be solved are coupled in the MEI. Combined with the finite difference method, the present method is applied to the analysis of scattering by 3D conducting objects and results in a significant improvement in the accuracy of numerical results as compared to those obtained with an uncoupled linear relation.     

A surface-mounted device assembly technique for small optics based on laser reflow soldering

The three-dimensional miniaturized optical surface-mounted device (TRIMO-SMD) is a new flexible and automated assembly technique for small optical components (maximum diameter for a lens is 2 mm) based on laser reflow soldering technique. This technology can be compared to the electronic SMD technique but applied to micro-optical devices. We present some recent developments of TRIMO-SMD in its application to industrial products.     

Solving matrix diophantine equations by inverting a square nonsingular system of equations

A method for solving the Diophantine equation using a nonsingular matrix equation system is proposed in this note. A scheme of setting up a system with the same number of variables as equations is described. An analytical approach to ensure the invertibility of the system formed is given. Examples presented show the simplicity of the method.     

RED gateway congestion control using median queue size estimates

This paper focuses on the queue size estimation problem in random early detection (RED) gateways. Queue size estimation plays a fundamental role in the congestion control dynamics of RED, as it determines gateways' awareness of network congestion, which in turn determines the packet dropping/marking decision. Conventional RED gateways use exponentially weighted moving averages (EWMA) to estimate the queue size. These infinite impulse response (IIR) filters require very small EWMA weights in order to effectively avoid nonlinear instabilities in RED and to filter out bursty increases in the queue size. While small EWMA weights enable gateways to accommodate transient congestion, they also lead to gateways' failure to closely track rapid queue size depletion and thus causes link under utilization. We investigate the use of simple nonlinear queue size estimators. In particular, we study the congestion control dynamics of a network where adaptive weighted median filters are used for queue size estimation by the gateways. Analytical results for the expected queue size in the steady state are derived. Under this new queue size estimation framework, design guidelines for the remaining RED parameters are provided. Simulation results show that the proposed algorithm provides greater network power, better prevention of global synchronization, and a fairer treatment to bursty traffic than the RED algorithm does.     

Interference characterization in the unlicensed band

We consider performance of a wireless communication receiver in the presence of a field of continuous wave (CW) interferers that are randomly distributed according to a Poisson process in space and frequency domain in the unlicensed band. From our theoretical model, we derive an accurate analytical expression for average bit error rate (BER). Judging from our results for a strong desired signal, when the user density grows up to ten times its value for a given signal to noise ratio (SNR), BER performance falls by 9.09% and 8.51 % for BPSK and DPSK respectively.     

A biomorphic digital image sensor

An arbitrated address-event imager has been designed and fabricated in a 0.6-/spl mu/m CMOS process. The imager is composed of 80 /spl times/ 60 pixels of 32 /spl times/ 30 /spl mu/m. The value of the light intensity collected by each photosensitive element is inversely proportional to the pixel's interspike time interval. The readout of each spike is initiated by the individual pixel; therefore, the available output bandwidth is allocated according to pixel output demand. This encoding of light intensities favors brighter pixels, equalizes the number of integrated photons across light intensity, and minimizes power consumption. Tests conducted on the imager showed a large output dynamic range of 180 dB (under bright local illumination) for an individual pixel. The array, on the other hand, produced a dynamic range of 120 dB (under uniform bright illumination and when no lower bound was placed on the update rate per pixel). The dynamic range is 48.9 dB value at 30-pixel updates/s. Power consumption is 3.4 mW in uniform indoor light and a mean event rate of 200 kHz, which updates each pixel 41.6 times per second. The imager is capable of updating each pixel 8.3K times per second (under bright local illumination).