Measurement of the K α to L α and K β to L β intensity ratios of seven elements in the atomic number range 52≤ Z ≤62 using photoionization at 59.5 keV1

The Kα to Lα and Kβ to Lβ intensity ratios of seven elements have been measured following photoionization at 59.5 keV by using a Si (Li) detector (FWHM=155 eV at 5.96 keV). The intensity ratios were determined by measuring K and L x-rays emitted from a standard target of a given element. The theoretical values of the Kα to Lα and Kβ to Lβ intensity ratios were calculated using theoretically tabulated values of shell/subshell photoionization cross sections, fluorescence yields, Coster-Kronig transition probabilities, and radiative decay rates for ηKLi≠ and ηKLi=0. The measured values are in good agreement with theoretical results. From Optika i Spektroskopiya, Vol. 97, No. 2, 2004, pp. 186–189. Original English Text Copyright ? 2004 by A. Kü?ük?nder, S?ğüt, E. Kü?ük?nder, Büyükkasap. This article was submitted by the authors in English.     

Optical amplification of photoinduced polarizability gratings in phosphate glasses

It is experimentally demonstrated that second-order polarizability gratings preliminarily recorded using bichromatic light in a phosphate glass can be amplified under the action of monochromatic radiation. The amplification effect takes place irrespective of the polarization and direction of propagation of the amplifying radiation and is achieved at various wavelengths. The phenomenon is related to the asymmetry of optical transitions between local centers in an isotropic medium in the presence of electric field. It is theoretically shown that this system may feature the formation of alternating electric field domains with dimensions depending on the grating amplitude.     

High accuracy description of radiative return production of low-mass muon and pion pairs at <Emphasis Type="Italic">e</Emphasis><Superscript>+</Superscript><Emphasis Type="Italic">e</Emphasis><Superscript>−</Superscript> colliders

The process of muon (pion) pair production with small invariant mass in electron-positron high-energy annihilation, accompanied by emission of a hard photon at large angles, is considered. We find that the Drell-Yan picture for the differential cross section is valid in the charge-even experimental setup. Radiative corrections both for the electron block and for the final-state block are taken into account.     

静压下ZnS：Te中Te等电子陷阱的发光

研究了4块ZnS：Te薄膜样品(Te组分从0．5％到3．1％)的光致发光谱在常压下的温度特性．对于Te组分较小的2块样品观察到2个发光峰，分别来自Te1和Te2等电子陷阱；而对Te组分较大的2块样品则只观察到1个来自Te2等电子陷阱的发光．我们还研究了这些发光峰在低温1．5K下的流体静压压力行为．观察到与Te1有关的发光峰压力系数比ZnS带边的要大很多，而与Te2有关的发光峰压力系数则比带边小．根据Koster-Slater模型，价带态密度半宽随压力的增加是Te1中心有较大压力系数的主要原因，而Te1和Te2中心的不同压力行为则是由于压力对两者缺陷势增强的不同效果引起的．     

Impacts of structural-acoustic coupling on the performance of energy density-based active sound transmission control

This paper investigates numerically the performance of the active sound transmission control into a rectangular cavity through a flexible panel under the energy density-based error-sensing algorithm. Full coupling between the sound transmitting panel and the enclosed space is considered. A pure vibration actuator, a pure acoustic source and a combined control source system are used as the secondary control source in the active control and their performances are studied. Formulae for the coupled eigenfrequencies of the cavity and the flexible panel are also derived. The strength of the structural-acoustic coupling, the ratio between the first eigenfrequencies of the cavity and the panel and the difference between the excitation frequency and the coupled eigenfrequencies, especially the latter, are found to have crucial impacts on the performance of the active control regardless the type of control source used.     

Intrinsic Fluorescence of Actin

In this work actin is used to illustrate connection of protein fluorescence characteristics with its structure. On one hand, it has been demonstrated what kind of information about the contribution of each tryptophan residues to the bulk fluorescence spectrum can be obtained from the special analysis of protein three-dimensional structure. On the other hand, potentials of intrinsic fluorescence for elucidation of proteins structure, dynamics and processes of folding-unfolding are shown. In particular, using this method a new essentially unfolded kinetic intermediate state of actin was detected and characterized, and the place of inactivated actin and its kinetic predecessor in the process of folding-unfolding was determined. It has been revealed that inactivated actin is not intermediate state between the native and completely unfolded states, as it has been accepted before, but a result of protein misfolding. On the basis of the obtained data a new model of actin folding-unfolding pathway has been proposed.     

Double adaptive notch filter for mechanical grain flow sensors

Nowadays, commercial combine harvesters are equipped with special sensors for the purposes of precision farming. Sensors are installed to measure the harvested surface and mass flow each second. Hence, grain yield maps are constructed, approximating the actual grain yield on the field before harvesting.Most grain flow sensors are installed on the paddle elevator before storage in the grain tank. At the elevator exit, paddles throw packs of grain against a curved plate on which a force transducer is attached. Therefore, the measured flow signal is heavily disturbed by the paddle rate and resonance frequency of the mechanical sensor.In this study, a computationally cheap method is presented to track both frequencies in the measured flow signal. Based on these frequency trackers, a double notch filter is tuned continuously to remove both disturbances. Moreover, the knowledge about the frequency content can be used to monitor the condition of the mechanical sensor and the paddle elevator.     

An EOQ model with process reliability considerations

The classical economic order quantity (EOQ) model assumes that items produced are of perfect quality and that the unit cost of production is independent of demand. However, in realistic situations, product quality is never perfect, but is directly affected by the reliability of the production process. In this paper, we consider an EOQ model with imperfect production process and the unit production cost is directly related to process reliability and inversely related to the demand rate. In addition, a numerical example is given to illustrate the developed model. Sensitivity analysis is also performed and discussed.