C-t analysis of MOS capacitors under constant current stress

The effect of high oxide field stress is studied using capacitance-time (C-t) measurements of MOS capacitors. The stress results in parallel shifts of the C-t curve along the time axis. The flatband voltage shift ΔV_FB obtained from the initial deep depletion capacitance C(t=0⁺) follows the same trend as that from the high-frequency C-V characteristics. However, the discrepancy between the two flatband voltages becomes larger as the stress increases due to the effect of interface charges on C-t characteristics. The flatband voltage difference is converted to interface trap density, showing a steady increase of interface trap density with stress, similar to that from low-frequency C-V measurements     

A fully soft-switched extended-period quasi-resonantpower-factor-correction circuit

This paper presents the design criteria, procedure, and implementation of a soft-switched power-factor-correction (PFC) circuit based on the extended-period quasi-resonant (EPQR) principles. All power electronic devices including switches and diodes in the circuit are fully soft switched. The design method is demonstrated in a prototype circuit. The operating principles are confirmed with computer simulation and experimental results. A comparison of the EP-QR operation and zero-voltage-transition (ZVT) pulse-width modulation (PWM) method     

A new lateral MOS-gated thyristor with controlling base-current

A new lateral MOS-gated thyristor, called the Base-Current-Controlled Thyristor, is described. This device is designed so that most holes at the on-stage reach the P base through the floating P⁺ region adjacent to the P base and the on-state MOSFET. At the turn-off stage, the interruption of the hole current to the P base due to switching off the above MOSFET occurs simultaneously with the conventional turn-off operation. The concept of this device is verified experimentally by using the fabricated lateral device with the external MOSFET. This device exhibits a better trade-off relation between the on-state voltage and the turn-off time compared uith the conventional MOS-gated thyristor     

Series equivalence/operation of current-controlled boost-typesingle-phase voltage source converters for bidirectional power flow

Single-phase voltage source power converters (VSCs) under consideration are AC-DC current-controlled boost-type power converters with bidirectional power-handling capability. Equivalence between two series-connected two-level power converters and a single three-level power converter is considered here. Further considered is the series operation of three-level power converters. Simulation results and experimental verification for both are provided. Economical configurations of three-level power converters leading to multilevel waveforms are presented thereafter     

A wafer level monitoring method for plasma-charging damage usingantenna PMOSFET test structure

A novel monitoring method for plasma-charging damage is proposed. This method performs a quick and accurate evaluation using antenna PMOSFET. It was found that not only hot-carrier (HC) lifetime but transistor parameters such as initial gate current and substrate current were changed according to the degree of plasma-charging damage. However, the present work suggests that monitoring the shift of drain current after a few seconds of HC stress is a more accurate method to indicate plasma-charging damage. The monitoring method using the present test structure is demonstrated to be useful for realizing highly reliable devices     

Temperature and field dependences of photo-induced changes in the magnetization in yttrium iron garnet

The changes in the magnetization of yttrium iron garnet (YIG) when irradiated by a pulsed neodymium laser beam with wavelength λ=1.06 μm are investigated. Measurements are performed in the temperature range from 100 K to 600 K in various external magnetic fields. YIG single crystals grown along the crystallographic (100), (110), and (111) directions are chosen so that the external anisotropy of the indicated processes can be determined. Characteristic temperature intervals dominated by different mechanisms of variation of the magnetization under the influence of a laser pulse are discussed. Fiz. Tverd. Tela (St. Petersburg) 39, 1263–1266 (July 1997)     

Temperature and frequency dependence of the spin-lattice relaxation times of E′1 centers in neutron-irradiated quartz glass

Results are reported for measurements of the spin-lattice relaxation times of E′₁ centers in quartz glass, produced by neutron irradiation, with the measurements made at two frequencies 9.25 and 24.0 GHz over a wide temperature interval 1.5–300 K. The experimental data are interpreted on the basis of interaction mechanisms of the spins with two-level systems with excitation energies ∼6, ∼26, and ∼420 cm⁻¹. A small modification of the existing theory allows us to explain a number of features of the observed temperature and frequency dependence of the relaxation rate. The results are compared with the data available in the literature on spin-lattice relaxation of irradiation centers in crystalline quartz and quartz glass. Fiz. Tverd. Tela (St. Petersburg) 39, 1335–1337 (August 1997)     

Correlation of the leakage current and charge pumping in silicon oninsulator gate-controlled diodes

The leakage and charge pumping currents were measured in gate-controlled MOS p-i-n diodes fabricated on thin SIMOX substrates. The efficiencies of the techniques as well as their complementary features are analyzed for various experimental conditions. The interface properties of device-grade SIMOX wafers are characterized and shown to be compatible with VLSI requirements. Special interface coupling effects, which occur only in fully depleted SOI devices and modify the conventional signature of charge pumping and leakage current, are thoroughly investigated     

Highly reliable 200 mW AlGaAs laser diode with fundamental transverse mode

A highly reliable 200 mW AlGaAs laser diode with a fundamental transverse mode has been developed, by optimising its structure with a 0.8 mu m thick p-cladding layer, a 1200 mu m long cavity length, and a front facet coating with a low reflectivity of 2%. The maximum output power was 500 mW, and stable fundamental transverse mode operation was obtained up to 350 mW. Stable operation under 200 mW and 50 degrees C was confirmed for more than 1200 h. Optical feedback noise was below 3*10/sup -14/ Hz/sup -1/.<>