Measurement of PLL phase error caused by power supply noise

The measurement of the accumulated phase error of phase-locked loops (PLLs) in microprocessor systems is discussed. A system which creates controlled power supply noise and measures the PLL response is described. Examples of the use of this technique are shown for a PLL used in a 400 MHz microprocessor     

Optical detection of NO3 and NO2 in “pure” HNO3 vapor,the liquid-phase decomposition of HNO3

Flowing and static gas-phase samples of HNO₃ in O₂ and N₂ were analyzed by long-path ultraviolet/visible (UV/VIS) spectroscopy to reveal the presence of both NO₂ and NO₃, the concentrations of which were calculated using differential absorption cross sections. NO₂ is produced predominantly by the heterogeneous decomposition of HNO₃, whereas NO₃ is generated in the gas phase by the thermal decomposition of N₂O₅, a product of the self-disproportionation of liquid HNO₃. © 1993 John Wiley & Sons, Inc.     

Enhanced electron emission from phosphorus-doped diamond-cladsilicon field emitter arrays

Undoped and phosphorus (P)-doped diamond-clad Si field emitter arrays have been successfully fabricated using microwave plasma chemical vapor deposition (MPCVD) technology. The electron emission from the blunt diamond-clad microtips are much higher than those for the pure Si tips with sharp curvature due to a lower work function. Furthermore, the characteristics of emission current against applied voltage for the P-doped diamond-clad tips show superior emission at lower field to the undoped ones. After the examination of Auger electron spectroscopy (AES) and electrical characteristics of as-grown diamond, such a significant enhancement of the electron emission from the P-doped diamond-clad tips is attributed to a higher electron conductivity and defect densities     

Sensorless speed measurement using current harmonic spectralestimation in induction machine drives

This paper proposes a sensorless speed measurement scheme that improves the performance of transducerless induction machine drives, especially for low-frequency operation. Speed-related harmonics that arise from rotor slotting and eccentricity are analyzed using digital signal processing. These current harmonics exist at any nonzero speed and are independent of time-varying parameters, such as stator winding resistance. A spectral estimation technique combines multiple current harmonics to determine the rotor speed with more accuracy and less sensitivity to noise than analog filtering methods or the fast Fourier transform. An on-line initialization routine determines machine-specific parameters required for slot harmonic calculations. This speed detector, which has been verified at frequencies as low as 1 Hz, can provide robust, parameter-independent information for parameter tuning or as an input to a sensorless flux observer for a field-oriented drive. The performance of the algorithm is demonstrated over a wide range of inverter frequencies and load conditions     

Performance model of interactive video-on-demand systems

An interactive video-on-demand (VoD) system allows users to access video services, such as movies, electronic encyclopedia, interactive games, and educational videos from video servers on a broadband network. This paper develops a performance evaluation tool for the system design. In particular, a user activity model is developed to describe the usage of system resources, i.e., network bandwidth and video server usage, by a user as it interacts with the service. In addition, we allow batching of user requests, and the effect of such batching is captured in a batching model. Our proposed queueing model integrates both the user activity and the batching model. This model can be used to determine the requirements of network bandwidth and video server and, hence, the trade-off in communication and storage costs for different system resource configurations     

Performance of asynchronous DS-CDMA system with long and shortspreading codes

The effect of spreading code length on the BER performance of an asynchronous DS-CDMA system is studied by means of Monte Carlo simulation. The probability of the crosscorrelation value between segments of long sequences is also discussed. Results indicate that the system performance with very long codes is ~1 dB worse compared to that of short CDMA codes     

Potential difference and photovoltaic effect arising from distortion of the electron wave function in a GaAs quantum well with a thin AlGaAs barrier

This paper discusses changes in the spectrum and distortion of the electron wave function of a GaAs quantum well when a thin AlGaAs barrier is introduced into it. The potential difference generated across the quantum well by distortion of the electron wave function is calculated, along with its dependence on the position of the barrier in the quantum well. The photovoltaic response of the structure to optical intersubband excitations is also calculated, along with the role of wave function and electronic spectrum distortion as well as intersubband nonradiative transitions in generating this response. The suitability of a GaAs quantum well with a thin barrier for use as an infrared detector is considered. Fiz. Tekh. Poluprovodn. 32, 1246–1250 (October 1998)     

Successive interference cancellation for multiuser asynchronousDS/CDMA detectors in multipath fading links

There has been an increasing interest in the use of code-division multiple access (CDMA) in cellular mobile and wireless personal communications. The choice of such multiaccess technique is attractive because of its potential capacity increases and other technical factors such as privacy and multipath rejection capabilities. However, it is well known that the performance of CDMA can be significantly degraded due to cochannel interference (CI) and the near-far effects. We consider the performance of direct-sequence (DS)-based CDMA over fading channels that are modeled as slowly varying Rayleigh-fading discrete multipath channels. Specifically, we propose and analyze an adaptive multistage interference cancellation strategy for the demodulation of asynchronous DS spread-spectrum multiple-access signals. Numerical results show that the proposed multistage detector, which alleviates the detrimental effects of the near-far problem, can significantly improve the system performance     

Anatomically constrained electrical impedance tomography forthree-dimensional anisotropic bodies

As shown previously for two-dimensional geometries, anisotropy effects should not be ignored in electrical impedance tomography (EIT) and structural information is important for the reconstruction of anisotropic conductivities. Here, we describe the static reconstruction of an anisotropic conductivity distribution for the more realistic three-dimensional (3-D) case. Boundaries between different conductivity regions are anatomically constrained using magnetic resonance imaging (MRI) data. The values of the conductivities are then determined using gradient-type-algorithms in a nonlinear-indirect approach. At each iteration, the forward problem is solved by the finite element method. The approach is used to reconstruct the 3-D conductivity profile of a canine torso. Both computational performance and simulated reconstruction results are presented together with a detailed study on the sensitivity of the prediction error with respect to different parameters. In particular, the use of an intracavity catheter to better extract interior conductivities is demonstrated     

Disaster recovery planning in an automated manufacturingenvironment

Disasters may strike at any moment in any location. When they do, no distinction is made about the type of firm that is being affected, whether it is a bank or a manufacturing plant. Most firms do not plan for possible disasters, and those that do have typically focused on computer and data contingency planning. In this paper, the focus is shifted to incorporate disaster recovery planning for manufacturing enterprises, especially those that are automated. Automated manufacturing enterprises have characteristics that put them at an increased risk to disasters. The methodological framework proposed in this paper will aid manufacturing organizations and their managers in reducing the risks associated with unanticipated disasters. The framework is termed the “Manufacturing Operations Recovery and Resumption” model. Recommended activities and tools for effective management of this methodology are identified