On ratio-based RTS determination: An extension

This technical note extends the results of our recent paper [Korhonen, Soleimani-damaneh, Wallenius, EJOR 215 (2011) 431–438], for determining the RTS status of Decision Making Units in Weight-Restricted DEA models.     

Fabrication of optical inverted-rib waveguides using UV-imprinting

In this paper we introduce a fabrication process for polymer rib waveguides that uses UV-imprint lithography. In the structure of an inverted-rib waveguide, the lower cladding of the waveguide is patterned by UV-imprinting and the waveguiding layer is subsequently spin-coated. That makes the thickness of the formed slab layer on the rib waveguide controllable by tuning the spin-coating parameters. The fabrication process utilizes two steps of UV-imprinting. The first one is to form a rigid polymer mold from positive tone photoresist. The second one is to pattern the waveguide lower cladding with the formed polymer mold. Through the two steps of UV-imprinting, rib waveguides can be fabricated without an etching procedure. We demonstrated the proposed fabrication process by fabricating 2-μm-wide waveguides operating in single mode at 1310 nm. With TE-polarized light, the fabricated waveguides show an average transmission of 58.6% in a 30 mm long waveguide, corresponding to a loss of 2.3 dB.     

An interactive weight space reduction procedure for nonlinear multiple objective mathematical programming

To make a decision that is defined by multiple, conflicting objectives it is necessary to know the relative importance of the different objectives. In this paper we present an interactive method and the underlying theory for solving multiple objective mathematical programming problems defined by a convex feasible region and concave, continuously differentiable objective functions. The relative importance of the different objectives for a decision maker is elicited by using binary comparisons of objective function vectors. The method is cognitively easy to use and in test problems has rapidly converged to an optimal solution.     

Compressing spatio-temporal trajectories

A trajectory is a sequence of locations, each associated with a timestamp, describing the movement of a point. Trajectory data is becoming increasingly available and the size of recorded trajectories is getting larger. In this paper we study the problem of compressing planar trajectories such that the most common spatio-temporal queries can still be answered approximately after the compression has taken place. In the process, we develop an implementation of the Douglas–Peucker path-simplification algorithm which works efficiently even in the case where the polygonal path given as input is allowed to self-intersect. For a polygonal path of size n, the processing time is O(nlog^kn) for k=2 or k=3 depending on the type of simplification.     

3D printed plano-freeform optics for non-coherent discontinuous beam shaping

Optical Review - The design, fabrication, and characterization of freeform optics for LED-based complex target irradiance distribution are challenging. Here, we investigate a 3D printing technology...     

Nanoformulation and Evaluation of Oral Berberine-Loaded Liposomes

Berberine (BBR) is a poorly water-soluble quaternary isoquinoline alkaloid of plant origin with potential uses in the drug therapy of hypercholesterolemia. To tackle the limitations associated with the oral therapeutic use of BBR (such as a first-pass metabolism and poor absorption), BBR-loaded liposomes were fabricated by ethanol-injection and thin-film hydration methods. The size and size distribution, polydispersity index (PDI), solid-state properties, entrapment efficiency (EE) and in vitro drug release of liposomes were investigated. The BBR-loaded liposomes prepared by ethanol-injection and thin-film hydration methods presented an average liposome size ranging from 50 nm to 244 nm and from 111 nm to 449 nm, respectively. The PDI values for the liposomes were less than 0.3, suggesting a narrow size distribution. The EE of liposomes ranged from 56% to 92%. Poorly water-soluble BBR was found to accumulate in the bi-layered phospholipid membrane of the liposomes prepared by the thin-film hydration method. The BBR-loaded liposomes generated by both nanofabrication methods presented extended drug release behavior in vitro. In conclusion, both ethanol-injection and thin-film hydration nanofabrication methods are feasible for generating BBR-loaded oral liposomes with a uniform size, high EE and modified drug release behavior in vitro.     

Melt‐compounded nanocomposites of titanium dioxide atomic‐layer‐deposition‐coated polyamide and polystyrene powders

Polyamide and polystyrene particles were coated with titanium dioxide films by atomic layer deposition (ALD) and then melt‐compounded to form polymer nanocomposites. The rheological properties of the ALD‐created nanocomposite materials were characterized with a melt flow indexer, a melt flow spiral mould, and a rotational rheometer. The results suggest that the melt flow properties of polyamide nanocomposites were markedly better than those of pure polyamide and polystyrene nanocomposites. Such behavior was shown to originate in an uncontrollable decrease in the polyamide molecular weight, likely affected by a high thin‐film impurity content, as shown in gel permeation chromatography (GPC) and scanning electron microscope (SEM) equipped with an energy‐dispersive spectrometer. Transmission electron microscope image showed that a thin film grew on both studied polymer particles, and that subsequent melt‐compounding was successful, producing well dispersed ribbon‐like titanium dioxide with the titanium dioxide filler content ranging from 0.06 to 1.12 wt%. Even though we used nanofillers with a high aspect ratio, they had only a minor effect on the tensile and flexural properties of the polystyrene nanocomposites. The mechanical behavior of polyamide nanocomposites was more complex because of the molecular weight degradation. Our approach here to form polymeric nanocomposites is one way to tailor ceramic nanofillers and form homogenous polymer nanocomposites with minimal work‐related risks in handling powder form nanofillers. However, further research is needed to gauge the commercial potential of ALD‐created nanocomposite materials. Copyright © 2011 John Wiley & Sons, Ltd.     

Size-controlled aerosol synthesis of silver nanoparticles for plasmonic materials

Aerosol techniques were used to synthesize spherical and monodisperse silver nanoparticles for plasmonic materials. The particles were generated with an evaporation-condensation technique followed by size selection and sintering with a differential mobility analyzer and a tube furnace, respectively. Finally, the nanoparticles were collected on a glass substrate with an electrostatic precipitator. The particle size distributions were measured with a scanning mobility particle sizer and verified with a transmission electron microscope. A spectrophotometer was used to measure the optical extinction spectra of the prepared samples, which contained particles with diameters of approximately 50, 90 and 130?nm. By controlling the particle size, the dipolar peak of the localized surface plasmon resonance was tuned between wavelengths of 398 and 448?nm. In addition, quadrupolar resonances were observed at shorter wavelengths as predicted by the simplified theoretical model used to characterize the measured spectra.