压力传感器封装中的波纹膜片结构研究

针对压力传感器隔离式封装中的波纹膜片这一关键部件,采用有限元分析的方法研究了波纹膜片的厚度、波纹深度和波纹数目分别对最大压力约0.1 MPa下的压力传感器输出信号的影响,优化了波纹膜片结构的参数选择。通过对封装了不同波纹膜片的样品的测试与比较表明,较小的膜厚与波纹深度、较多的波纹数目有助于提高压力传感器的性能,从而验证了波纹膜片结构优化的正确性。     

光伏电站设计智能优化

由于目前光伏电站设计目前没有相应的标准,因此以个人经验为指导的情况,无法保证电站建设的成本最优,鉴于此问题,本文提出了一种光伏电站优化设计方法,基于模拟退火算法,通过对光伏区域中的组件进行最优分组来实现两级电缆成本的最优。并通过实际项目对该算法进行检验,达到比较理想效果。     

基于DSP+FPGA的飞机防滑刹车控制器系统设计

刹车控制器是飞机刹车系统的核心部件,其功能是控制液压电磁阀和压力伺服阀输出刹车压力,为飞机着陆滑跑提供刹车制动和防滑控制,实现各种不同模式的刹车功能.刹车控制器的性能优劣将会直接影响到飞机的刹车性能乃至飞机的安全.文章介绍了一种刹车控制器的设计与实现.此刹车控制器选用DSP作为主控处理器,用来控制刹车控制器离散量和模拟量接口电路,选用FPGA作为总线和轮速采集控制.此产品已成功在飞机上应用,工作稳定可靠,因此具有较高的参考性.     

单型掺杂柱电极的3D硅像素探测器的器件与制造工艺研究

设计了一种新的3D硅像素探测器的器件结构以简化制造工艺.该结构仅包含一种掺杂类型的柱状电极.通过工业级TCAD仿真对这种结构的电学特性进行了深入研究,阐述了它的技术优势及潜在缺陷.同时研究了制造这种3D硅像素探测器的特殊工艺流程和相关关键工艺,并给出了主要工艺结果.     

用于光子计数的InGaAs/InP SPAD设计

重点研究了InGaAs/InP SPAD的隧道贯穿电场、雪崩击穿电场、雪崩宽度与过偏电压的关系,提出了过偏电压的计算方法.分析了InGaAs/InP SPAD的基本特性即探测效率、暗计数率与其过偏电压、工作温度、量子效率、电场分布的依赖关系,提出了一种单光子InGaAs雪崩二极管的设计方法.设计制作了InGaAs/InP SPAD,并在门控淬灭模式下进行了单光子探测实验.结果表明:对于200m的SPAD,在过偏2 V、温度-40 ℃条件下,探测效率(PDE) 20%(1 550 nm)、暗计数率(DCR)20 kHz;对于50m的SPAD,在过偏2.5 V、温度-40 ℃条件下,探测效率(PDE) 23%(1 550 nm)、暗计数率(DCR)2 kHz.最后对实验结果进行了分析和讨论.     

A Novel Fission Process in Mini-emulsion RAFT Polymerization: Shell Crosslinked Nanoparticles as a Model

Shell crosslinked nanoparticles, prepared from copolymerization of styrene and disulfide crosslinker, using poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) as stabilizer and macroinitiator, exhibited a special fission behavior during the mini-emulsion RAFT polymerization process.     

Thermal Properties of Copoly(L‐lactic acid/glycolic acid) by Direct Melt Polycondensation

Poly(L‐lactic acid‐co‐glycolic acid) (PLGA) was prepared from hydroxy‐acids with melt polymerization. In this way, the copoly(L‐LA/GA) (PLGA) was synthesized directly using a binary catalyst (tin chloride dihydrate/p‐toluenesulfonic acid). The thermal properties of PLGA were studied by differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR). The results show that the melting point of PLGA decreases with increasing mole fraction of GA units in the copolymer. In addition, the melting point of polymer also decreases with increasing degree of racemization of the polymer.     

A UFLC‐MS/MS method with a switching ionization mode for simultaneous quantitation of polygalaxanthone III,four ginsenosides and tumulosic acid in rat plasma: application to a comparative pharmacokinetic study in normal and Alzheimer's disease rats

A fast, sensitive and reliable ultra fast liquid chromatography‐tandem mass spectrometry (UFLC‐MS/MS) method has been developed and validated for simultaneous quantitation of polygalaxanthone III (POL), ginsenoside Rb1 (GRb1), ginsenoside Rd (GRd), ginsenoside Re (GRe), ginsenoside Rg1 (GRg1) and tumulosic acid (TUM) in rat plasma after oral administration of Kai‐Xin‐San, which plays an important role for the treatment of Alzheimer's disease (AD). The plasma samples were extracted by liquid–liquid extraction using ethyl acetate–isopropanol (1:1, v/v) with salidrdoside as internal standard (IS). Good chromatographic separation was achieved using gradient elution with the mobile phase consisting of methanol and 0.01% acetic acid in water. The tandem mass spectrometric detection was performed in multiple reaction monitoring mode on 4000Q UFLC‐MS/MS system with turbo ion spray source in a negative and positive switching ionization mode. The lower limits of quantification were 0.2–1.5 ng/ml for all the analytes. Both intra‐day and inter‐day precision and accuracy of analytes were well within acceptance criteria (±15%). The mean absolute extraction recoveries of analytes and IS from rat plasma were all more than 60.0%. The validated method has been successfully applied to comparing pharmacokinetic profiles of analytes in normal and AD rat plasma. The results indicated that no significant differences in pharmacokinetic parameters of GRe, GRg1 and TUM were observed between the two groups, while the absorption of POL and GRd in AD group were significantly higher than those in normal group; moreover, the GRb1 absorbed more rapidly in model group. The different characters of pharmacokinetics might be caused by pharmacological effects of the analytes. Copyright © 2013 John Wiley & Sons, Ltd.     

Direct electrochemistry of hemoglobin on graphene/Fe3O4 nanocomposite-modified glass carbon electrode and its sensitive detection for hydrogen peroxide

Graphene/Fe₃O₄ nanocomposite was prepared for the immobilization of hemoglobin (Hb) to improve the electron transfer between Hb and glass carbon electrode (GCE). The characterization of nanocomposites was described by transmission electron microscopy, Fourier transform infrared, Raman spectroscopy, and X-ray photoelectron spectroscopy, respectively. The electrochemistry of Hb on the graphene/Fe₃O₄-based GCE was investigated by cyclic voltammetry and amperometric measurement. The modified electrode showed a wide linear range from 0.25 μmol/L to 1.7 mmol/L with a correlation coefficient of 0.9967. The detection limit of the H₂O₂ biosensor was estimated at 6.0?×?10^?6?mol/L at a signal-to-noise ratio of 3.