Optimal solutions for a dynamic bandwidth allocation scheme in high-speed networks

In this paper, we investigate the problem of determining the optimal bandwidth allocation for a Dynamic Bandwidth Allocation Scheme (DBAS). The objective is to minimize the total amount of bandwidth required to satisfy the Quality of Service (QoS) requirements of all traffic streams. It is shown that when the performance functions satisfy a certain number of conditions, there exists a unique optimal bandwidth allocation such that, for each traffic stream, either its QoS is just satisfied or its QoS is over-satisfied and it is allocated zero bandwidth. Such an allocation is said to be efficient. It is also shown that there exists a unique efficient allocation in the entire feasible region. An iterative algorithm is developed to compute the efficient allocation employing its special properties. Numerical examples are presented to demonstrate how the algorithm works. Future extensions of this work are also discussed.Partially supported by NSERC of Canada through grants OGP14020 and STRIN-200.     

双模含失谐均匀加宽激光的不稳定性与混沌

研究了双模含失谐均匀加宽激光的不稳定与混沌行为，在不同失谐情况下给出了激光经Ｈｏｐｆ分岔而出现洛仑茨不稳定的判据，它与模式跳变不稳定共同构成了激光的不稳定边界，并且模拟发现洛仑茨不稳定在一定条件下将触发激光模式的跳变，从而表现出双模所特有的非稳定现象。     

System reliability estimation using simulation combined with network reductions

This paper proposes a dynamic Monte Carlo sampling method, called the conditional minimal cut set (COMICS) algorithm, where all arcs are not simulated at each trial and all minimal cut sets need not be given in advance. The proposed algorithm repeats simulating a minimal cut set composed of the arcs which originate from the (new) source node and reducing the network on the basis of the states of simulated arcs until the s-t connectedness is confirmed. We develop the importance sampling estimator, the total hazard estimator and the hazard importance sampling estimator which are all based on the proposed algorithm, and compare the performance of these simulation estimators. It is found that these estimators can significantly reduce the variance of the raw simulation estimator and the usual importance sampling estimator.     

乙醇-水混合溶液中1-苯基-3-甲基-4-苯甲酰基吡唑酮-5对Nd(Ⅲ), Eu(Ⅲ),Ho(Ⅲ)的萃取及其机理

在乙醇－水混合溶液中，1－苯基－3－甲基－4－苯甲酰基吡唑酮－5与Nd(Ⅲ）,Eu(Ⅲ）,Ho(Ⅲ）等及乙醇形成了萃合物，使萃取分配比明显提高。利用斜率法研究了萃取机理。借助红外（IR）、元素分析、热分析（TG－DTA）等手段对萃合物进行了表征。     

激光除锈过程的实时监测技术研究

对激光除锈过程中的实时监测技术进行了实验研究,结果表明:除锈过程中产生的声波强度会随着表面清洁度的变化而发生明显的变化,声波信号包含了除锈过程中的大量信息,可作为激光除锈实时监测的基本信号.     

特征提取在硅内部微/纳米级体缺陷检测中的应用

提出了一种利用特征提取来对硅中微/纳米级体缺陷的激光散射图样进行分析,以获得缺陷大小信息的分析方法.给出了该方法中第一特征值和第二特征值的定义,指出通过所提出的第一特征值及第二特征值即可迅速地判断出缺陷的大小量级所在.这种分析方法具有分析速度快,在体缺陷小于1μm时分辨率高,且可使系统实现自动化等优点.     

X波段及DBS接收用PHEMT单片低噪声放大器

报道了X波段及DBS接收用单片低噪声放大器的研制结果。利用CAD软件对单片电路进行优化设计，设计工作包括MBE材料、PHEMT器件和单片电路三部分。在研制过程中，开展了关键工艺的专题研究。研究结果为：单级单片放大器在10：5－11．6GHz范围内，NF≤1．82dB，G≥7.72dB；在11．7－12．2GHz范围内，NF≤1．80dB，G≥6．8dB；双级放大器在10．4－11．1GHz范围内，NF≤1．96dB，G≥15．3dB，最低噪声系数为1．63dB，最高增益为16．07dB。     

Structured genetic algorithm for robust H∞ controlsystems design

A structured genetic algorithm (SGA) approach is developed for robust controller design based on the concept of an H^∞ loop-shaping technique and the method of inequalities. Such an SGA is capable of simultaneously searching the orders and coefficients of the precompensator and postcompensator for the weighted plant. It is, therefore, not necessary to predefine the order of compensators as in usual practice. A multiple objective ranking approach is also incorporated so that the design criteria of extreme plants can be easily achieved. The effectiveness of such a technique is illustrated by a high-purity distillation column design example     

Self-aligned offset gated poly-Si TFTs with a floating sub-gate

We have fabricated a self-aligned offset-gated poly-Si thin film transistor (TFT) by employing a novel photoresist reflow process. The gate structure of the new device is consisted of two unique patterns: A main-gate and a sub-gate. The new fabrication method extends the gate-oxide over the offset region. With the assistance of the sub-gate and reflowed photoresist a self-aligned offset region is successfully obtained due to the offset oxide acting as an implantation mask. The poly-Si TFT with symmetrical offsets is easily fabricated and the new method does not require any additional offset mask step. Compared with the misaligned offset gated poly-Si TFTs, excellent symmetric electrical characteristics are obtained     

双波长医用Nd:YAG固体激光器自动控制系统的设计

本文阐述了双波长医用Ｎｄ：ＹＡＧ固体激光器的自动计时，自动恒温控制系统。