A minimal amount of acrylonitrile turns the nitroxide‐mediated polymerization of methyl methacrylate into an almost ideal controlled/living system

Nitroxide‐mediated controlled/living free‐radical polymerization of methyl methacrylate initiated by the SG1‐based alkoxyamine BlocBuilder was successfully performed in bulk at 80–99 °C with the help of a very small amount of acrylonitrile (AN, 2.2–8.8 mol %) as a comonomer. Well‐defined PMMA‐rich P(MMA‐co‐AN) copolymers were prepared with the number‐average molar mass, M_n, in the 6.1–32 kg mol^?1 range and polydispersity indexes as low as 1.24. Incorporation of AN in the copolymers was demonstrated by ¹H and ¹³C NMR spectroscopy, and its effect on the chain thermal properties was evaluated by DSC and TGA analyses. Investigation of chain‐end functionalization by an alkoxyamine group was performed by means of ³¹P NMR spectroscopy and chain extensions from a P(MMA‐co‐AN)‐SG1 macroinitiator. It demonstrated the very high proportion of SG1‐terminated polymer chains, which opened the door to block copolymer synthesis with a high quality of control. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 34–47, 2010     

Stimulus‐responsive polymers based on 2‐hydroxypropyl acrylate prepared by RAFT polymerization

Homopolymerization and diblock copolymerization of 2‐hydroxypropyl acrylate (HPA) has been conducted using reversible addition fragmentation chain transfer (RAFT) chemistry in tert‐butanol at 80 °C. PHPA homopolymers were obtained with high conversions and narrow molecular weight distributions over a wide range of target degrees of polymerization. Like its poly(2‐hydroxyethyl methacrylate) isomer, PHPA homopolymer exhibits inverse temperature solubility in dilute aqueous solution, with cloud points increasing systematically on lowering the mean chain length. The nature of the end groups is shown to significantly affect the cloud point, whereas no effect of concentration was observed over the PHPA concentration range investigated. Various thermoresponsive PHPA‐based diblock copolymers were prepared via one‐pot syntheses in which the second block was either permanently hydrophilic or pH‐responsive. Preliminary studies confirmed that poly(ethylene oxide)‐poly(2‐hydroxypropyl acrylate) (PEO₄₅‐PHPA₄₈) and poly(2‐hydroxypropyl acrylate)‐ poly(2‐hydroxyethyl acrylate) (PHPA₄₉‐PHEA₆₈)diblock copolymers formed well‐defined PHPA‐core micelles in 10 mM sodium nitrate solution at 40 °C and 70 °C with mean hydrodynamic diameters of 20 nm and 35 nm, respectively. In contrast, most other PHPA‐based diblock copolymers investigated formed larger colloidal aggregates in 10 mM NaNO₃ solution at elevated temperatures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2032–2043, 2010     

Probing the Hydrogen Bonding Structure in the Rieske Protein

The use of the far‐infrared spectral range presents a novel approach for analysis of the hydrogen bonding in proteins. Here it is presented for the analysis of Fe? S vibrations (500–200 cm^?1) and of the intra‐ and intermolecular hydrogen bonding signature (300–50 cm^?1) in the Rieske protein from Thermus thermophilus as a function of temperature and pH. Three pH values were adequately chosen in order to study all the possible protonation states of the coordinating histidines. The Fe? S vibrations showed pH‐dependent shifts in the FIR spectra in line with the change of protonation state of the histidines coordinating the [2Fe? 2S] cluster. Measurements of the low‐frequency signals between 300 and 30 K demonstrated the presence of a distinct overall hydrogen bonding network and a more rigid structure for a pH higher than 10. To further support the analysis, the redox‐dependent shifts of the secondary structure were investigated by means of an electrochemically induced FTIR difference spectroscopic approach in the mid infrared. The results confirmed a clear pH dependency and an influence of the immediate environment of the cluster on the secondary structure. The results support the hypothesis that structure‐mediated changes in the environment of iron? sulfur centers play a critical role in regulating enzymatic catalysis. The data point towards the role of the overall internal hydrogen bonding organization for the geometry and the electronic properties of the cluster.     

Formation of metal-anion arrays within layered perovskite hosts. Preparation of a series of new metastable transition-metal oxyhalides, (MCl)LaNb(2)O(7) (M = Cr,Mn, Fe,Co)

A new series of transition-metal oxyhalides (MCl)LaNb(2)O(7) (M = Cr, Mn, Fe, Co) have been prepared by a simple topochemical route. Layered perovskite hosts (ALaNb(2)O(7), A = Li, Na, K or Rb) were reacted with the corresponding anhydrous metal halides under mild reaction conditions (<400 degrees C). The compounds were examined by X-ray powder diffraction; the series appears to be isostructural with (CuCl)LaNb(2)O(7), and the layer spacings, with the exception of M = Co, follow the trend expected from transition-metal cationic radii. Thermal analysis with differential scanning calorimetry (DSC) shows the materials to be metastable where all four compounds decompose exothermically above 690 degrees C.     

A mixed-bridging ligand nonanuclear Ru(II) dendrimer containing a tris- chelating core. Synthesis and redox properties

The first ligand-cored dendrimer based on branching Ru(II) centers and containing mixed polypyridine bridging ligands has been prepared; redox experiments suggest that the redox-active core is not reduced at the expected potential, probably as a consequence of shielding induced by the rigid dendritic array.     

tert‐Butyl (6S)‐4‐hydroxy‐6‐isobutyl‐2‐oxo‐1,2,5,6‐tetra­hydropyridine‐1‐carboxyl­ate and tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxopiperidine‐1‐carboxyl­ate

X‐ray studies reveal that tert‐butyl (6S)‐6‐iso­butyl‐2,4‐dioxo­piperidine‐1‐carboxyl­ate occurs in the 4‐enol form, viz. tert‐butyl (6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo‐1,2,5,6‐tetra­hydropyri­dine‐1‐carboxyl­ate, C₁₄H₂₃NO₄, when crystals are grown from a mixture of di­chloro­methane and pentane, and has an axial orientation of the iso­butyl side chain at the 6‐position of the piperidine ring. Reduction of the keto functionality leads predominantly to the corresponding β‐hydroxy­lated δ‐lactam, tert‐butyl (4R,6S)‐4‐hydroxy‐6‐iso­butyl‐2‐oxo­piperidine‐1‐car­boxyl­ate, C₁₄H₂₅NO₄, with a cis configuration of the 4‐hydroxy and 6‐iso­butyl groups. The two compounds show similar molecular packing driven by strong O—H⋯O=C hydrogen bonds, leading to infinite chains in the crystal structure.     

Synthesis, structural, spectroscopic, and electrochemical characterization of high oxidation state diruthenium complexes containing four identical unsymmetrical bridging ligands

Six Ru2(6+) derivatives of the form Ru2(L)4(C[triple bond]CC6H5)(2), where L = 2-Fap, 2,3-F(2)ap, 2,4-F(2)ap, 2,5-F(2)ap, 3,4-F(2)ap, or 2,4,6-F(3)ap, are synthesized and characterized as to their electrochemical, spectroscopic, and/or structural properties. These compounds are synthesized from a reaction between LiC[triple bond]CC6H5 and Ru2(L)4Cl. Two of the investigated complexes exist in a (4,0) isomeric form while four adopt a (3,1) geometric conformation. These two series of geometric isomers are compared with previously characterized (4,0) Ru2(ap)4(C[triple bond]CC6H5)(2), (4,0) Ru2(F5ap)4(C[triple bond]CC6H5)(2), and (3,1) Ru2(F5ap)4(C[triple bond]CC6H5)(2). The overall data on the nine compounds thus provide an opportunity to systematically examine how the electrochemical and structural properties of these Ru2(6+) complexes vary with respect to isomer type and electronic properties of the bridging ligands.     

Enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox): synthesis, scope and copolymerization with styrene

The design of a synthetic route to a class of enantiomerically pure phosphaalkene-oxazolines (PhAk-Ox) is presented. The condensation of a lithium silylphosphide and a ketone (the phospha-Peterson reaction) was used as the P=C bond-forming step. Attempted condensation of PhC(=O)Ox (Ox = CNOCH(iPr)CH(2)) and MesP(SiMe(3))Li gave the unusual heterocycle (MesP)(2)C(Ph)=CN-(S)-CH(iPr)CH(2)O (3). However, PhAk-Ox (S,E)-MesP=C(Ph)CMe(2)Ox (1?a) was successfully prepared by treating MesP(SiMe(3))Li with PhC(=O)CMe(2)Ox (52?%). To demonstrate the modularity and tunability of the phospha-Peterson synthesis several other phosphaalkene-oxazolines were prepared in an analogous manner to 1?a: TripP=C(Ph)CMe(2)Ox (1?b; Trip = 2,4,6-triisopropylphenyl), 2-iPrC(6)H(4)P=C(Ph)CMe(2)Ox (1?c), 2-tBuC(6)H(4)P=C(Ph)CMe(2)Ox (1?d), MesP=C(4-MeOC(6)H(4))CMe(2)Ox (1?e), MesP=C(Ph)C(CH(2))(4)Ox (1?f), and MesP=C(3,5-(CF(3))(2)C(6)H(3))C(CH(2))(4)Ox (1?g). To evaluate the PhAk-Ox compounds as prospective precursors to chiral phosphine polymers, monomer 1?a and styrene were subjected to radical-initiated copolymerization conditions to afford [{MesPC(Ph)(CMe(2)Ox)}(x){CH(2)CHPh}(y)](n) (9?a: x = 0.13n, y = 0.87n; GPC: M(w) = 7400?g mol(-1) , PDI = 1.15).