1,10‐Phenanthroline and Non‐Symmetrical 1,3,5‐Triazine Dipicolinamide‐Based Ligands For Group Actinide Extraction

The synthesis and evaluation of new extractants for spent nuclear fuel reprocessing are described. New bitopic ligands constituted of phenanthroline and 1,3,5‐triazine cores functionalized by picolinamide groups were designed. Synthetic routes were investigated and optimized to obtain twelve new polyaza‐heterocyclic ligands. In particular, an efficient and versatile methodology was developed to access non‐symmetric 2‐substituted‐4,6‐di(6‐picolin‐2‐yl)‐1,3,5‐triazines from the 1,3,5‐triazapentadiene precursor in the presence of anhydride reagents. Extraction studies showed the ability of both ligand series to extract and separate actinides selectively at different oxidation states (U^VI, Np^V,VI, Am^III, Cm^III, and Pu^IV) from an acidic solution (3 M HNO₃). Phenanthroline‐based ligands show the most promising efficiency for use in the group actinide extraction (GANEX) process due to a higher number of donor nitrogen atoms and a suitable pre‐organization of the dipicolinamide‐1,10‐phenanthroline architecture.     

Counting of Oxygen Defects versus Metal Surface Sites in Methanol Synthesis Catalysts by Different Probe Molecules

Different surface sites of solid catalysts are usually quantified by dedicated chemisorption techniques from the adsorption capacity of probe molecules, assuming they specifically react with unique sites. In case of methanol synthesis catalysts, the Cu surface area is one of the crucial parameters in catalyst design and was for over 25 years commonly determined using diluted N₂O. To disentangle the influence of the catalyst components, different model catalysts were prepared and characterized using N₂O, temperature programmed desorption of H₂, and kinetic experiments. The presence of ZnO dramatically influences the N₂O measurements. This effect can be explained by the presence of oxygen defect sites that are generated at the Cu‐ZnO interface and can be used to easily quantify the intensity of Cu‐Zn interaction. N₂O in fact probes the Cu surface plus the oxygen vacancies, whereas the exposed Cu surface area can be accurately determined by H₂.     

Tranexamic Acid Cream Protects Ultraviolet B-induced Photoaging in Balb/c Mice Skin by Increasing Mitochondrial Markers: Changes Lead to Improvement of Histological Appearance

Tranexamic acid (TSA) is widely used as an antiaging treatment for reducing melasma and wrinkles. There are various mechanisms for wrinkle formation, and one of them is due to damage of the mitochondria. Research on mitochondria in the skin is very limited, so we are interested to see the changes that occur after application of TSA cream. We explored the effect of TSA on mitochondrial protein levels (PGC1α, Tom20, COX IV), which had affected to skin histological structure. Thirty male, 6-week-old, Balb/C mice were divided into five groups (negative control, positive control, TSA 3%, TSA 4% and TSA 5%). After 10 days of acclimatization, four groups of mice were exposed to UVB light, of which three groups were given TSA cream for 10 weeks. The skin tissue was excised for protein and histological studies. H&E staining was performed for evaluating histological changes in epidermal thickness and dermal elastosis. TSA treatment on the mice skin increased mitochondrial marker levels and epidermal thickness while decreasing dermal elastosis for all the treatment groups. Topical application of TSA significantly increased mitochondrial biogenesis which may cause alteration in epidermal thickness and reduced dermal elastosis in the histology of mice skin.     

Tuning PtII-Based Donor–Acceptor Systems through Ligand Design: Effects on Frontier Orbitals,Redox Potentials,UV/Vis/NIR Absorptions,Electrochromism, and Photocatalysis

Asymmetric platinum donor–acceptor complexes [(pimp)Pt(Q²⁻)] are presented in this work, in which pimp=[(2,4,6-trimethylphenylimino)methyl]pyridine and Q²⁻=catecholate-type donor ligands. The properties of the complexes are evaluated as a function of the donor ligands, and correlations are drawn among electrochemical, optical, and theoretical data. Special focus has been put on the spectroelectrochemical investigation of the complexes featuring sulfonyl-substituted phenylendiamide ligands, which show redox-induced linkage isomerism upon oxidation. Time-dependent density functional theory (TD-DFT) as well as electron flux density analysis have been employed to rationalize the optical spectra of the complexes and their reactivity. Compound 1 ([(pimp)Pt(Q²⁻)] with Q²⁻=3,5-di-tert-butylcatecholate) was shown to be an efficient photosensitizer for molecular oxygen and was subsequently employed in photochemical cross-dehydrogenative coupling (CDC) reactions. The results thus display new avenues for donor–acceptor systems, including their role as photocatalysts for organic transformations, and the possibility to introduce redox-induced linkage isomerism in these compounds through the use of sulfonamide substituents on the donor ligands.     

Measuring the Stability of Supramolecular Complexes in the Proximity of Single-Walled Carbon Nanotubes

The decoration of SWNTs with supramolecular motifs is a common strategy for their subsequent noncovalent functionalization. However, due to the lack of a standard methodology, there are no quantitative measurements showing the extent to which the supramolecular equilibria are affected by one of the host-guest couple being anchored to the SWNT. Here, we use a method we initially developed to quantify association of small organic molecules to the walls of SWNTs to compare association constants of two host-guest systems, a Hamilton receptor-cyanuric acid derivative and a crown ether-ammonium couple, in solution and when the host is covalently attached to the SWNTs. Our data show that association does occur, but the stability of the complexes is significantly affected, as reflected in a sizable reduction in their association constant, when compared to solution.     

A novel catalytic adsorptive stripping voltammetric method for the determination of germanium ultratraces in the presence of chloranilic acid and the V(IV)·HEDTA complex

A novel, sensitive catalytic adsorptive stripping voltammetric procedure which can be used to determine trace amounts of germanium is described. The method is based on the interfacial accumulation of the complex formed by Ge(IV) and the product of the reduction of chloranilic acid on the hanging mercury drop electrode or the renewable silver amalgam film electrode, and its subsequent reduction from the adsorbed state followed by the catalytic action of the V(IV)·HEDTA complex. The presence of V(IV)·HEDTA greatly enhances the adsorptive stripping response of Ge. The reduction of the Ge(IV) in the presence of chloranilic acid and V(IV)·HEDTA was investigated in detail and the effects of pH, electrolyte composition, and instrumental parameters were studied. Under optimal conditions, the catalytic peak current of germanium exhibited good linearity for Ge(IV) concentrations in the range of 0.75–60 nM (for 60 s of accumulation at −0.1 V, r² = 0.995) and a low limit of detection (LOD = 0.085 nM). The procedure was successfully applied to determine Ge in water samples.

     

Polymer Networks: From Plastics and Gels to Porous Frameworks

Polymer networks, which are materials composed of many smaller components—referred to as “junctions” and “strands”—connected together via covalent or non‐covalent/supramolecular interactions, are arguably the most versatile, widely studied, broadly used, and important materials known. From the first commercial polymers through the plastics revolution of the 20^th century to today, there are almost no aspects of modern life that are not impacted by polymer networks. Nevertheless, there are still many challenges that must be addressed to enable a complete understanding of these materials and facilitate their development for emerging applications ranging from sustainability and energy harvesting/storage to tissue engineering and additive manufacturing. Here, we provide a unifying overview of the fundamentals of polymer network synthesis, structure, and properties, tying together recent trends in the field that are not always associated with classical polymer networks, such as the advent of crystalline “framework” materials. We also highlight recent advances in using molecular design and control of topology to showcase how a deep understanding of structure–property relationships can lead to advanced networks with exceptional properties.     

Nickela‐electrocatalyzed Mild C−H Alkylations at Room Temperature

Direct alkylations of carboxylic acid derivatives are challenging and particularly nickel catalysis commonly requires high reaction temperatures and strong bases, translating into limited substrate scope. Herein, nickel‐catalyzed C?H alkylations of unactivated 8‐aminoquinoline amides have been realized under exceedingly mild conditions, namely at room temperature, with a mild base and a user‐friendly electrochemical setup. This electrocatalyzed C?H alkylation displays high functional group tolerance and is applicable to both the primary and secondary alkylation. Based on detailed mechanistic studies, a nickel(II/III/I) catalytic manifold has been proposed.     

Probing the Roughness of Porphyrin Thin Films with X-ray Photoelectron Spectroscopy

Thin-film growth of molecular systems is of interest for many applications, such as for instance organic electronics. In this study, we demonstrate how X-ray photoelectron spectroscopy (XPS) can be used to study the growth behavior of such molecular systems. In XPS, coverages are often calculated assuming a uniform thickness across a surface. This results in an error for rough films, and the magnitude of this error depends on the kinetic energy of the photoelectrons analyzed. We have used this kinetic-energy dependency to estimate the roughnesses of thin porphyrin films grown on rutile TiO₂(110). We used two different molecules: cobalt (II) monocarboxyphenyl-10,15,20-triphenylporphyrin (CoMCTPP), with carboxylic-acid anchor groups, and cobalt (II) tetraphenylporphyrin (CoTPP), without anchor groups. We find CoMCTPP to grow as rough films at room temperature across the studied coverage range, whereas for CoTPP the first two layers remain smooth and even; depositing additional CoTPP results in rough films. Although, XPS is not a common technique for measuring roughness, it is fast and provides information of both roughness and thickness in one measurement.