Influence of polyethylene glycols on percolative phenomena in AOT microemulsions

The influence of different polyethylene glycol (PEG) on the percolation of the ternary system composed by sodium bis(2-ethylhexyl) sulfosuccinate (AOT) + isooctane + water has been studied. The additives used were chosen on the basis of its chain length (the number of polymeric units). In all cases, we observed a decrease in the percolation threshold on increasing the amount of PEG added to the AOT microemulsions. We observed a correlation between the effect exerted by the additive upon the percolation temperature and its chain length. Moreover, a relationship between the percolation temperature and the additive partition coefficient between 1-octanol and water (logP) was found. Both of them proved the importance of the inclusion of the additives into the microemulsion interface to explain their influence upon the percolative phenomenon. Such inclusion modified the properties of the AOT film, facilitating the exchange of matter between droplets.     

金属铜配合物催化氧化1-(3,4-二甲氧基苯)乙醇的动力学研究

合成了1-(3,4-二甲氧基苯)乙醇(DMPE)作为木质素模型物,并用初始速率法研究了40℃时在pH6.5～8.5磷酸缓冲溶液中N,N-双(2-乙基-5-甲基-咪唑-4-亚甲基)乙醇胺合铜、N,N-双(2-(2-羟乙基胺基)乙基)草酰胺合铜和5,7,12,14-四甲基-1,4,8,11-四氮杂环十四-4,7,11,14-四烯合铜催化氧化1-(3,4-二甲氧基苯)乙醇的动力学,提出了1-(3,4-二甲氧基苯)乙醇氧化反应动力学模型,并由此计算出不同pH值条件下催化反应动力学参数k2和Km.铜配合物的催化活性随着pH的增大而增大.具有大共轭体系的配体催化剂表现出更好的催化活性.提出并讨论了H2O2氧化DMPE的催化氧化反应机理.     

Neutral and cationic alkylmanganese(II) complexes containing 2,6-bisiminopyridine ligands

Manganese alkyl complexes stabilised by 2,6-bis(N,N'-2,6-diisopropyl-phenyl)acetaldiminopyridine ((iPr)BIP) have been selectively prepared by reacting suitable alkylmanganese(II) precursors, such as homoleptic dialkyls [(MnR(2))(n)] or the corresponding THF adducts [{MnR(2)(thf)}(2)] with the mentioned ligand. For R=CH(2)CMe(2)Ph or CH(2)Ph, formally Mn(I) derivatives are produced, in which one of the two R groups migrates to the 4-position of the central pyridine ring in the (iPr)BIP ligand. In contrast, a true dialkyl complex [MnR(2)((iPr)BIP)] can be isolated for R=CH(2)SiMe(3). In solution, this compound slowly evolves to the corresponding Mn(I) monoalkyl derivative. A detailed study of this reaction provides insights on its mechanism, showing that it proceeds through successive alkyl migrations, followed by spontaneous dehydrogenation. Protonation of [Mn(CH(2)SiMe(3))(2)((iPr)BIP)] with the pyridinium salt [H(Py)(2)][BAr'(4)] (Ar'=3,5-C(6)H(3)(CF(3))(2)) leads to the cationic species [Mn(CH(2)SiMe(3))(Py)((iPr)BIP)](+). Alternatively, the same complex can be produced by reaction of the pyridine complex [{Mn(CH(2)SiMe(3))(2)(Py)}(2)] with the protonated ligand salt [H(iPr)BIP](+)[BAr'(4)](-). This last reaction allows the synthesis of analogous cationic alkylmanganese(II) derivatives, when precursors of type [MnR(2)((iPr)BIP)] are not available. Treatment of these neutral and cationic (iPr)BIP alkylmanganese derivatives with a range of typical co-catalysts (modified methylaluminoxane (MMAO), B(C(6)F(5))(3), trimethyl or triisobutylaluminum) does not lead to active ethylene polymerisation catalysts.     

Real‐Time Monitoring of Mass‐Transport‐Related Enzymatic Reaction Kinetics in a Nanochannel‐Array Reactor

To understand the fundamentals of enzymatic reactions confined in micro‐/nanosystems, the construction of a small enzyme reactor coupled with an integrated real‐time detection system for monitoring the kinetic information is a significant challenge. Nano‐enzyme array reactors were fabricated by covalently linking enzymes to the inner channels of a porous anodic alumina (PAA) membrane. The mechanical stability of this nanodevice enables us to integrate an electrochemical detector for the real‐time monitoring of the formation of the enzyme reaction product by sputtering a thin Pt film on one side of the PAA membrane. Because the enzymatic reaction is confined in a limited nanospace, the mass transport of the substrate would influence the reaction kinetics considerably. Therefore, the oxidation of glucose by dissolved oxygen catalyzed by immobilized glucose oxidase was used as a model to investigate the mass‐transport‐related enzymatic reaction kinetics in confined nanospaces. The activity and stability of the enzyme immobilized in the nanochannels was enhanced. In this nano‐enzyme reactor, the enzymatic reaction was controlled by mass transport if the flux was low. With an increase in the flux (e.g., >50 μL min^?1), the enzymatic reaction kinetics became the rate‐determining step. This change resulted in the decrease in the conversion efficiency of the nano‐enzyme reactor and the apparent Michaelis–Menten constant with an increase in substrate flux. This nanodevice integrated with an electrochemical detector could help to understand the fundamentals of enzymatic reactions confined in nanospaces and provide a platform for the design of highly efficient enzyme reactors. In addition, we believe that such nanodevices will find widespread applications in biosensing, drug screening, and biochemical synthesis.     

Advantages of using a modified orthogonal sampling configuration originally designed for LC-ESI-MS to couple CE and MS for the determination of antioxidant phenolic compounds found in virgin olive oil

A ThermoFinnigan sheath liquid flow capillary electrophoresis-mass spectrometry system designed for coupling via a co-axial interface was coupled through an adapted via an alternative, commercially available interface for orthogonal sampling. The affordable, reversible structural alterations made in the commercial LC-MS interface resulted in improved analytical performance.The results of a conventional capillary electrophoresis (CE) method using a commercial co-axial source to determine antioxidant phenolic acids present in virgin olive oil, were compared with those obtained by using a modified orthogonal sampling position. In both cases, separations were done using a 10 mM ammonium acetate/ammonium hydroxide buffer solution at pH 10.0 and a constant applied voltage of 25 kV. The operating variables for the mass spectrometry interface were re-optimized for the modified orthogonal orientation. This allowed the sheath liquid, sheath gas flow rates and capillary voltage to be lowered with respect to the co-axial coupling configuration. In addition, the orthogonal sampling position provided a higher selectivity by effect of ion sampling excluding larger droplets—with an increased momentum along the axis—which were drained through the sink at the bottom of the ion source. Also, the new configuration facilitated sample ionization, improved electrospray stability and led to stronger signals as a result.The new system was validated in terms of precision (repeatability), linearity, and limits of detection and quantification. A comparison of the validation data with the results previously obtained by using a commercial co-axial configuration revealed the adapted orthogonal sampling position to provide better repeatability in both migration times and relative peak areas (<1% and 7% respectively with n = 15 replicates), a good linear range (with levels in the microgram-per-litre region) and lower limits of detection—especially for the compounds detected with the lowest sensitivity when co-axial ESI was used, as HFA, GEN, FER and VAN finding LOD among 24-3.0 μg L⁻¹ respectively.     

High-performance affinity monolith chromatography for chiral separation and determination of enzyme kinetic constants

A new kind of immobilized human serum albumin (HSA) column was developed by using the sub-micron skeletal polymer monolith based on poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) [poly(GMA-EDMA)] as the support of high-performance affinity chromatography. Using the epoxide functional groups presented in GMA, the HSA immobilization procedure was performed by two different means. The affinity columns were successfully adopted for the chiral separation of d,l-amino acids (AAs). Then this method was shown to be applicable to the quantitative analysis of d-tryptophan, with a linear range between 12.0 μM and 979.0 μM, and a correlation coefficient above 0.99. Furthermore, it was used for the analysis of urine sample. This assay is demonstrated to be facile and relatively rapid. So it allows us to measure the enzyme catalytic activity in the incubation of d,l-AAs with d-AA oxidase and to study the kinetics of the enzyme reaction. It implied that the affinity monolithic columns can be a useful tool for studying DAAO enzyme reaction and investigating the potential enzyme mechanism requirement among chiral conversion.     

Cerium(IV), neptunium(IV), and plutonium(IV) 1,2-phenylenediphosphonates: correlations and differences between early transuranium elements and their proposed surrogates

The in situ hydrothermal reduction of Np(VI) to Np(IV) and Pu(VI) to Pu(IV) in the presence of 1,2-phenylenediphosphonic acid (PhP2) results in the crystallization of Np[C(6)H(4)(PO(3)H)(2)](2)·2H(2)O (NpPhP2) and Pu[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (PuPhP2), respectively. Similar reactions have been explored with Ce(IV) resulting in the isolation of the Ce(IV) phenylenediphosphonate Ce[C(6)H(4)(PO(3)H)(PO(3)H(2))][C(6)H(4)(PO(3)H)(PO(3))]·2H(2)O (CePhP2). Single crystal diffraction studies reveal that although all these three compounds all crystallize in the triclinic space group P1?, only PuPhP2 and CePhP2 are isotypic, whereas NpPhP2 adopts a distinct structure. In the cerium and plutonium compounds edge-sharing dimers of MO(8) polyhedra are bridged by the diphosphonate ligand to create one-dimensional chains. NpPhP2 also forms chains. However, the NpO(8) units are monomeric. The protonation of the ligands is also different in the two structure types. Furthermore, the NpO(8) polyhedra are best described as square antiprisms (D(4d)), whereas the CeO(8) and PuO(8) units are trigonal dodecahedra (D(2d)). Bond-valence parameters of R(o) = 1.972 and b = 0.538 have been derived for Np(4+) using a combination of the data reported in this work with that available in crystallographic databases. The UV-vis-NIR absorption spectra of NpPhP2 and PuPhP2 are also reported and used to confirm the tetravalent oxidation states.     

Synthesis of unnatural pentahydroxylated pyrrolizidines: 5-epi- and 5,7a-di-epi-hyacinthacine C1

Stereocontrolled synthesis of 5-epi- and 5,7a-di-epi-hyacinthacine C₁ (7 and 8), two potential glycosidase inhibitors are described using α,β-unsaturated ketone 9 as homochiral starting material. The key step in the synthesis is the highly diastereoselective dihydroxylation reaction of 9, that allows the obtention of a single bis-hydroxylated ketone (10). Further derivatization into two epimeric mesylate esters followed by internal cyclization form the pyrrolizidinic compounds 7 and 8. This type of compounds can be useful in glycobiology due to their ability to inhibit carbohydrate-processing enzymes.     

Theoretical and experimental study of the vertical excitation energies in the ionic and tautomeric forms of 4-aminomethylpyridine

4-Aminomethylpyridine (4-PAM) has been widely used as a model compound to elucidate the mechanisms of biological and biomedical action of the amino derivatives of vitamin B₆. By virtue of the presence of two ionizable groups (viz. a pyridine nitrogen and an amino function) in its structure, 4-PAM in solution occurs as various ionic and tautomeric forms in equilibrium. In this work, we optimized the geometries of such forms and found the protonation status of the ionizable groups in 4-PAM to affect the molecular geometry and frontier orbitals. In addition, we determined the experimental electronic excitation energies for each molecular species of 4-PAM from deconvoluted UV–vis spectra. The results thus obtained were compared with their theoretical counterparts as determined from TD-DFT calculations. Based on the outcome, the theoretical methodology used affords correct simulation of electronic excitation energies. The theoretical and experimental results showed that the deprotonation of the pyridine nitrogen has no effect on the energy of the first electronic transition, however it affects its intensity. Additionally, the deprotonation of both pyridine nitrogen and methylamino group increases the number of bands, by increasing the n–π^* transitions.