A low-power baseband receiver IC for frequency-hopped spreadspectrum communications

A baseband receiver IC which will be incorporated into a low-power frequency-hopped spread spectrum (FH/SS) transceiver for 902-928 MHz ISM band applications is presented. The chip performs noncoherent binary/quaternary frequency shift keying (FSK) demodulation, equal-gain diversity combining of dual antenna branches, and symbol and frequency synchronization. The chip also accommodates variable data rates from 2 to 160 kb/s, programmable hop rates, and tunable bandwidth Loop filters. The core area of the 1-μm CMOS chip is 3.9 mm×3.9 mm with a power consumption of 4.5 mW at 10 MHz from a 3-V supply. A baseband transceiver system utilizing this receiver chip for the prototype handset to demonstrate a point-to-point communication link is also described. Two XILINX FPGA chips were used to implement the remainder of the baseband transceiver functions, including frequency control logic for FSK modulation, acquisition control, data framing, symbol interleaving and deinterleaving, and interface control for data and voice     

Synthesis of the D-Galactopyranoside Derivative of C_(60)

ThefascinatingsbocturesandpropertiesoffullereneshaveoPeneduPanewfieldofchendstry.Inparticular,F.Wudletal.l'2haveshownthatwatersofubleC6ocomPoundsinhibittheHITVen-zymesprotease(HIVP)andreversetranscriPtase(HIVRT).IthasbeenafocusofstUdytoinvestigatethebiologicalactivitiesofthesenovelsubstances.Fortheirpossiblemedicaluses,tolinkC6omoleculetonaturalProductssuchassugars,pephdes,amioacides,andsoonisanimPortantmethodinthisfield.Vasella3reportedthefirstglucosidederivativeofC6o'InthispaPer,w…     

Hg_（1－x）Cd_xTe的扫描光致发光研究

用傅里叶变换红外扫描光致发光方法研究了Ｈｇ１－ｘＣｄｘＴｅ体单晶样品，该方法可直接得到ＨｇＣｄＴｅ晶片组分的二维平面分布，并可得到辐射复合在复合机制中所占比重的平面分布，以及晶体中非平衡载流子寿命的分布     

Simulation of polarization converter formed by poling-inducedpolymer waveguides

A polarization converter using electrooptic (EO) polymer waveguides is proposed and it is simulated by a full vectorial beam propagation method (VBPM) for anisotropic medium. First, an efficient structure of poling electrodes is proposed for the fabrication of TE-mode poling-induced waveguides in EO polymer. For given electrode structures of both TE-mode and TM-mode waveguides, poling-induced dielectric tensors are calculated by the finite-element method to provide refractive index distribution, data for VBPM simulation. It is shown numerically that the poled TE and TM mode waveguides work efficiently as the corresponding polarization filters. Then, new poling electrodes are suggested to fabricate a waveguide device formed by connecting the TE and TM mode waveguides adiabatically with a slowly varying structure. This waveguide device has the optic axis slowly rotating as one moves along the propagation direction, so that it will act as polarization converter. VBPM simulation shows that the polarization of the guided mode rotates following the optic axis distribution. Polarization conversion is demonstrated successfully with high conversion efficiency and low excess loss     

利用特征为2域上伪辛几何中1维非迷向子空间构作PBIB设计

关于结合方案和PBIB设计的定义及所用的有关符号见文献[1].设F_q为特征为2的有限域,q=2~r.熟知F_q上的对称矩阵合同于以下三种形式的矩阵(见[1]p.24).     

ICP－AES法测定富锗酵母中微量元素

本文采用美国ＬｅｅｍａｎＬａｂｓ公司中阶梯光栅光谱仪测定了人工培养的富锗酵母中高含量锗及镁、铜、锌、铁、钾、钠等微量元素，研究了富锗样品的前处理方法，样品加标回收率在９０％－１０３％之间，测量相对标准偏差：锗１０％，镁、铜、锌、铁、钾、钠等元素小于７％。     

在3．39μm波段甲烷吸收特性的测量与应用研究

报道了甲烷气体在３．３９μｍ波段吸收特性的研究结果，及其在３．３９μｍ波段多波长干涉测量中的应用。通过改变甲烷吸收室的充气参数，使激光器工作在双等光强工作点，并完成了绝对距离的干涉测量。     

Small-dimension power-efficient high-speed vertical-cavity surface-emitting lasers

Small-dimension power-efficient high-speed oxide-confined 980 nm vertical-cavity surface-emitting lasers (VCSELs) with record-high bandwidth/power-dissipation ratio of 12.5 GHz/mW have been demonstrated. The devices show a modulation bandwidth of 15 GHz at a bias current 0.9 mA, corresponding to only 1.2 mW power dissipation     

Synthesis of 5‐Radioiodoarabinosyl Uridine Analog for Probing the HSV‐1 Thymidine Kinase Gene

Tumor cells transduced with herpes simplex virus thymidine kinase gene have been intensively applied to the field of positron emission tomography via imaging of its substrate. As a pilot synthesis approach, a facile preparation of 5‐[¹²⁵I] iodoarabinosyl uridine starting from commercially available uridine is reported herein.