Fast solid-phase extraction-gas chromatography-mass spectrometry procedure for oil fingerprinting. Application to the Prestige oil spill

A rapid and simple fractionation procedure using solid-phase extraction (SPE) cartridges was developed for an accurate determination of aliphatic and polycyclic aromatic hydrocarbons in petroleum residues and further application in chemical fingerprinting of oil spills by gas chromatography-mass spectrometry (GC-MS). Among the adsorbents evaluated, SiO2/C3-CN exhibited the best selectivity, providing, by elution with n-hexane (4 ml) and n-hexane-CH2Cl2 (1:1) (5 ml), two well-resolved aliphatic and aromatic hydrocarbon fractions, with recoveries of 97 +/- 7.2 and 99.7 +/- 13.9%, respectively. The SPE fractionation procedure was compared with the conventional silica-alumina adsorption chromatography showing similar results but practical advantages in terms of reproducibility, analysis time, solvent reduction and cost. Moreover, is particularly suitable for routine analysis with a high sample throughput. The developed methodology was tested in the characterization of fuel-oil samples collected along the Spanish north-west coast, after the Prestige oil spill accident.     

Reactivity of pyrrole pigments. Part 9 MINDO/3 calculations on dipyrrolic partial models of bile pigments

The applicability of the MINDO/3 method is evaluated for calculations on dipyrrolic partial structures of bile pigments. It is shown that this method cannot be used for an accurate conformational analysis. However, when applying the frontier orbital model for reactivity parameters, a good picture of the HOMO and the LUMO distribution can be obtained in this type of molecules.

---

Reaktivität von Pyrrolpigmenten, 9. Mitt. MINDO/3-Rechnungen von dipyrrolischen Partialmodellen von Gallenpigmenten

Zusammenfassung Es werden die Einsatzmöglichkeiten von MINDO/3 für den Fall dipyrrolischer Partialstrukturen der Gallenpigmente aufgezeigt. Die Methode ist für eine genaue Konformationsanalyse nicht geeignet. Unter Verwendung der Reaktionsparameter des Frontier-Orbital-Modells läßt sich jedoch ein gutes Bild der HOMO- und LUMO-Verteilung für diesen Verbindungstyp gewinnen.

     

Local aromaticity of [n]acenes, [n]phenacenes, and [n]helicenes (n = 1-9)

The local aromaticity of the six-membered rings in three series of benzenoid compounds, namely, the [n]acenes, [n]phenacenes, and [n]helicenes for n = 1-9, has been assessed by means of three probes of local aromaticity based on structural, magnetic, and electron delocalization properties. For [n]acenes our analysis shows that the more reactive inner rings are more aromatic than the outer rings. For [n]phenacenes, all indicators of aromaticity show that the external rings are the most aromatic. From the external to the central ring, the local aromaticity varies in a damped alternate way. The trends for the [n]helicene series are the same as those found for [n]phenacenes. Despite the departure from planarity in [n]helicenes, only a very slight loss of aromaticity is detected in [n]helicenes as compared to the corresponding [n]phenacenes. Finally, because of magnetic couplings between superimposed six-membered rings in the higher members of the [n]helicenes series, we have demonstrated that the NICS indicator of aromaticity artificially increases the local aromaticity of their most external rings.     

Elicitor-Induced VOC Emission by Grapevine Leaves: Characterisation in the Vineyard

The present study is aimed at determining whether leaf volatile organic compounds (VOCs) are good markers of the grapevine response to defence elicitors in the field. It was carried out in two distinct French vineyards (Burgundy and Bordeaux) over 3 years. The commercial elicitor Bastid^® (Syngenta, Saint-Sauveur, France) (COS-OGA) was first used to optimise the VOCs’ capture in the field; by bagging stems together with a stir bar sorptive extraction (SBSE) sensor. Three elicitors (Bastid^®, copper sulphate and methyl jasmonate) were assessed at three phenological stages of the grapevines by monitoring stilbene phytoalexins and VOCs. Stilbene production was low and variable between treatments and phenological stages. VOCs—particularly terpenes—were induced by all elicitors. However, the response profiles depended on the type of elicitor, the phenological stage and the vineyard, and no sole common VOC was found. The levels of VOC emissions discriminated between weak (Bastid^® and copper sulphate) and strong (methyl jasmonate) inducers. Ocimene isomers were constitutively present in the overall blends of the vineyards and increased by the elicitors’ treatments, whilst other VOCs were newly released throughout the growing seasons. Nonetheless, the plant development and climate factors undoubtedly influenced the release and profiles of the leaf VOCs.     

The Coordinate Reaction Model: An Obstacle to Interpreting the Emergence of Chemical Complexity

The way chemical transformations are described by models based on microscopic reversibility does not take into account the irreversibility of natural processes, and therefore, in complex chemical networks working in open systems, misunderstandings may arise about the origin and causes of the stability of non-equilibrium stationary states, and general constraints on evolution in systems that are far from equilibrium. In order to be correctly simulated and understood, the chemical behavior of complex systems requires time-dependent models, otherwise the irreversibility of natural phenomena is overlooked. Micro reversible models based on the reaction-coordinate model are time invariant and are therefore unable to explain the evolution of open dissipative systems. The important points necessary for improving the modeling and simulations of complex chemical systems are: a) understanding the physical potential related to the entropy production rate, which is in general an inexact differential of a state function, and b) the interpretation and application of the so-called general evolution criterion (GEC), which is the general thermodynamic constraint for the evolution of dissipative chemical systems.     

Two Methods for Retrieving UV Index for All Cloud Conditions from Sky Imager Products or Total SW Radiation Measurements

Cloud effects on UV Index (UVI) and total solar radiation (TR) as a function of cloud cover and sunny conditions (from sky images) as well as of solar zenith angle (SZA) are assessed. These analyses are undertaken for a southern‐hemisphere mid‐latitude site where a 10‐years dataset is available. It is confirmed that clouds reduce TR more than UV, in particular for obscured Sun conditions, low cloud fraction (<60%) and large SZA (>60°). Similarly, local short‐time enhancement effects are stronger for TR than for UV, mainly for visible Sun conditions, large cloud fraction and large SZA. Two methods to estimate UVI are developed: (1) from sky imaging cloud cover and sunny conditions, and (2) from TR measurements. Both methods may be used in practical applications, although Method 2 shows overall the best performance, as TR allows considering cloud optical properties. The mean absolute (relative) differences of Method 2 estimations with respect to measured values are 0.17 UVI units (6.7%, for 1 min data) and 0.79 Standard Erythemal Dose (SED) units (3.9%, for daily integrations). Method 1 shows less accurate results but it is still suitable to estimate UVI: mean absolute differences are 0.37 UVI units (15%) and 1.6 SED (8.0%).     

Drug release system of ibuprofen in PCL-microspheres

Today, the technology of microencapsulation of active principles is on top of biomedical advances, because through it we can solve many of the problems caused by current methods of taking medication. Active principle microencapsulation not only solves the problems of drug intake but also controls its dosage. In this study was carried out the development of a protocol for the microencapsulation of ibuprofen by solvent evaporation method. A subsequent application of those microencapsulates to biofunctional textile substrates (cotton, polyamide, acrylic, and polyester) using a finishing process, and finally a study of the release of active principle in two different media (deionized water and physiological serum) has been carried out using samples of the treated fabrics that were submerged into a thermostatized vessel at semi-infinite bath conditions. The determination of active principles released to the bath was determined by a UV spectrophotometer. These experimental results have been analyzed and evaluated, and have therefore allowed to define a controlled drug release system by Fickian diffusion in different media.