Zur Stereoisomerie der 2,6-Dichlor-4-methoxyheptane

2,6-Dichloro-4-methoxy-heptanes may exist as 2 optical active isomers and 2 meso compounds. By double addition of ,-dichloro-dimethylether to propene a mixture of these stereoisomers was obtained. They were separated by HPLC. Using¹H- and¹³C-NMR-spectroscopy their configuration could be established.

     

Investigation of environmental reliability of optical polymer waveguides embedded on printed circuit boards

In this paper, the effects of environmental stresses on the properties of polymeric optical waveguides were investigated. Optical multimode waveguides were embedded on printed circuit boards by employing commercial polymers. Three optical-PCB constructions varying in board structure and in optical build-up materials were compared. The guide systems were subjected to four different tests: damp heat-high humidity, isothermal annealing, thermal shock and environmental flowing multigas test. Isothermal annealing reduced the refractive index to greatest extent. The optical-PCB structure with optical surface build-up layer was observed to be more vulnerable under temperature shock when compared with the O-PCB with optical inner layer. The buffer layer beneath the optical build-up was found to improve the stability of the optical waveguides significantly. The results indicated of a wavelength dependence to the aging factor with a failure mechanism. The factors affecting the performance and reliability of polymer-based optical waveguides on PCBs were discussed.     

Persistent luminescence — Quo vadis?

The present status of the persistent luminescence mechanisms is reviewed and the remaining unsolved details are discussed. These details include the identification and role of defects in the Eu²⁺-doped and R³⁺ co-doped alkaline earth aluminates (MAl₂O₄) and disilicates (M₂MgSi₂O₇; M:Ca, Sr, Ba) which can be partly resolved by the thermoluminescence (TL) measurements. The use of the synchrotron radiation - presently only sparsely used in the studies of persistent luminescence - is introduced: the oxidation state of the presumed R²⁺/R³⁺/R^IV species occurring in the persistent luminescence materials during the luminescence processes were examined with synchrotron radiation XANES (and EXAFS) methods. The band gap energies (E_g), the defect-related luminescence as well as the 4f⁷→4f⁶5d¹ transition energies were derived from the synchrotron radiation excitation spectra of the materials. Subsequently, the early steps of the density functional theory (DFT) calculations involving the solution of the persistent luminescence mechanisms (band gap energies, position of the Eu²⁺ levels) are discussed. Some remaining challenges are eventually highlighted.     

Hydrogen bond catalyzed direct reductive amination of ketones

[reaction: see text] A novel, biomimetic concept for the direct reductive amination of ketones is described that relies on selective imine activation by hydrogen bond formation. The mild, acid- and metal-free process requires only catalytic amounts of thiourea as hydrogen bond donor and utilizes the Hantzsch ester for transfer hydrogenation. The method allows the efficient synthesis of structurally diverse amines.     

Evaluating the impact of GC operating settings on GC-FID performance for total petroleum hydrocarbon (TPH) determination

Interlaboratory comparisons for the analysis of mineral oil have indicated that many laboratories have problems in producing data of acceptable quality, mainly because of variations in the gas chromatographic settings used in the determination. A D-optimal design was therefore utilized to study the effects of six different GC operating settings on the GC performance criterion proposed by ISO and CEN draft standards ISO/FDIS 16703:2004 and CEN prEN 14039:2004:E for total petroleum hydrocarbon (TPH) determination. Both qualitative and quantitative factors were investigated. The results indicate that the performance criterion can only be achieved if the splitless injection settings are carefully optimized. Otherwise mass discrimination readily affects the validity of the results. The most critical factors affecting GC performance were the inlet liner design, inlet temperature and injection volume. The methods, however, were robust with respect to small changes in split vent time, GC column flow and FID temperature. The results show that non-discriminating splitless injection can only be obtained by optimizing the injector settings with respect to the significant factors. The main conclusion that can be drawn is that, if no further standardization is to be given for TPH determination by GC-FID, then a proper estimate of the expanded uncertainty should be appended to the TPH results. Only then can the reliability of the TPH results be guaranteed and further justification thus gained to support the end-use of the data.     

Mass Spectroscopy of the Antileukemic Drug MGBG and Related Bis(Amidinohydrazones) [‘Bis(Guanylhydrazones)’]

The first study on the mass spectroscopy of various bis(amidinohydrazones) is reported. The compounds studied included the investigational antileukemic drugs methylglyoxal bis(amidino-hydrazone) [‘methylglyoxal bis(guanylhydrazone)’, MGBG] and glyoxal bis(amidinohydrazone), as well as seven mono- and dialkylglyoxal analogs thereof. The results indicate that the free bases of these high-melting compounds are volatilized well enough to allow a facile detection of the molecular ions and to make mass spectroscopy of the underivatized compounds a suitable method for the verification of the identity of the substances. This result is of importance considering the development of novel analogs and derivatives. A compilation of electron-impact mass spectra is reported and possible fragmentation routes are outlined. The fragmentation of the various congeners appears to occur essentially similarly, the main paths involving breakage of the carbon-carbon single bond in the glyoxal moiety or breakage of either one of the nitrogen-nitrogen single bonds.     

Harmonization of methods for analysis of cholesterol oxides in foods--the first portion of a long road toward standardization: interlaboratory study

A compilation of literature data on the content of cholesterol oxidation products (COP) in various food products and in blood demonstrates a large variation in content in products or tissues of very similar nature when analyzed in different laboratories according to a large number of methods. The lack of validated, internationally recognized methodology with published accuracy and precision has so far hindered such assessments. Hence an interlaboratory comparision of methodologies of COP analysis was undertaken on egg yolk powders (EYP), whole milk powders (WMP), skim milk powders (SMP), and lard (L). Each product type had one fresh sample (low) and one aged (high) in COP contents. A total of 17 sets of results on WMP, 15 on SMP and EYP, and 13 on L were compared. Overall results (mg/kg sample) varied extensively: Fresh EYP 0.72-265, aged EYP 2.51-361; fresh WMP 0.02-18.1, aged WMP 0.02-26.9; fresh SMP 0.02-6.51, aged SMP <0.01-6.51; fresh L 0.18-97, aged L 4.15-452. Some results were questioned, viz., those from laboratories not indicating substantial differences between samples "low" and "high" in total COP. Others were excluded because of lack of verification of identity of gas chromatographic peaks by mass spectrometry. Then a more narrow range of core results (mg/kg sample) was observed: Fresh EYP 5.69-29.5 sample, aged EYP 11.8-79.0; fresh WMP 0.12-1.76, aged WMP 1.17-13.7; fresh SMP <0.30-<1.21, aged SMP 0.30-2.26; fresh L 0.18-5.07, aged L 94.4-231. At a workshop discussing the results, numerous recommendations were made toward more reliable methodology for determination of COP in foods.     

Phenylpropanoid glycosides from Rhodiola rosea

Rhodiola rosea L. (Golden Root) has been used for a long time as an adaptogen in Chinese traditional medicine and is reported to have many pharmacological properties. Along its known secondary metabolites tyrosol (1), salidroside (rhodioloside) (2), rosin (3), rosarin (4), rosavin (5), sachaliside 1 (6) and 4-methoxy-cinnamyl-O-beta-D-glucopyranoside (7), four compounds were isolated from aqueous methanol extract of the plant and identified as cinnamyl-(6'-O-beta-xylopyranosyl)-O-beta-glucopyranoside (8), 4-methoxy-cinnamyl-(6'-O-alpha-arabinopyranosyl)-O-beta-glucopyranoside (9), picein (10) and benzyl-O-beta-glucopyranoside (11) by UV, MS and NMR methods. Compounds 8 and 9 are new natural compounds whereas compounds 10 and 11 were isolated first time from R. rosea. Also the compounds 6 and 7 are isolated earlier only from the callus cultures of the plant but not from the differentiated plant.     

Determination of selenium in small volumes of blood plasma and serum by electrothermal atomic absorption spectrometry

A graphite-furnace atomic absorption spectrometric method is described for the determination of selenium in blood plasma and serum. Samples are diluted (1 + 9) with a solution containing nickel and nitric acid and measured by a standard additions method. Repeatability for a serum sample containing 87 μg Se l^-1 was 4.4%. The mean recovery of selenium(IV) from a human protein solution was 97.5%. The method was further tested in an interlaboratory comparison study. The standard additions procedure requires a sample volume of 200 μl and a total time of about 7.5 min. A secondary calibration graph can be used, however, resulting in increased throughput up to 13 samples per hour, and a decrease in the sample volume needed to 100 μl.     

Generalization of the B *‐algebra (C0(X),∥ ∥∞)

We give a generalization of the Stone–Weierstrass property for subalgebras of C (X), with X a completely regular Hausdorff space. In particular, we study in this paper some subalgebras of C₀(X), with X a locally compact Hausdorff space, provided with weighted norm topology. By using the Stone–Weierstrass property, we then describe the ideal structure of these algebras. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)