Spectrophotometric determination of Pd(II) using 1,3 bis (2′-pyridyl)-1,2-diaza-prop-2-ene

Summary The reaction of 1,3 bis (2-pyridyl)-l,2-diaza-prop-2-ene(PAPHY) with Pd(II) to produce a coloured complex extractable into organic solvents has been used to measure microquantities of Pd(II) in acid solutions. The method is sensitive for Pd(II) concentrations of 5g and above. Method used involves the reaction of Pd(II) with the ligand PAPHY in an acid medium followed by extraction of the Pd-PAPHY complex into benzene. The red complex has 2 absorption maxima in the visible spectrum, one at 573 nm and the other at 545 nm. The interference by other divalent ions has been studied and found to be negligible.

---

Zusammenfassung Die Reaktion von 1,3-Bis-(2-pyridyl)-1,2-diaza-propen-2 (PAPHY) mit Pd(II) führt zur Bildung einer mit organischen Lösungsmitteln extrahierbaren, gefärbten Komplexverbindung und wurde zur Bestimmung von Mikromengen Pd(II) in sauren Lösungen verwendet. Die Methode eignet sich für 5g Pd(II) und mehr. Der rote Pd-PAPHY-Komplex wird aus saurem Milieu mit Benzol extrahiert und hat 2 Absorptionsmaxima im sichtbaren Bereich, u. zw. bei 573 nm und bei 545 nm. Störungen durch zweiwertige Fremdionen wurden geprüft und sind vernachlässigbar.

     

Development of a liquid chromatography/tandem mass spectrometry assay for the quantification of PM00104, a novel antineoplastic agent, in mouse, rat, dog, and human plasma

A rapid and sensitive liquid chromatography/tandem mass spectrometry (LC/MS/MS) assay was developed and validated to quantify a novel antineoplastic agent, PM00104, in mouse, rat, dog, and human plasma. The method was validated to demonstrate the specificity, limit of quantification (LOQ), accuracy, and precision of measurements. The calibration range for PM00104 was established using PM00104 standards from 0.01-5.0 ng/mL in blank plasma. The selected reaction monitoring (SRM), based on the m/z 692.2 --> 218.2 transition, was specific for PM00104, and that based on the m/z 697.2 --> 218.2 transition was specific for PM00104 ((13)C(2),(2)H(3)) (the internal standard, IS); no endogenous materials interfered with the analysis of PM00104 and IS from blank plasma. The assay was linear over the concentration range 0.01-5.0 ng/mL. The correlation coefficients for the calibration curves ranged from 0.9981-0.9999. The mean intra-day and inter-day accuracies for all calibration standards (n = 8) ranged from 97-105% (< or =5% bias) in human plasma, and the mean inter-day precision for all calibration standards was less than 8.5%. The mean intra- and inter-day assay accuracy for all quality control (QC) replicates in human plasma (n = 9), determined at each QC level throughout the validated runs, ranged from 96-112% (< or =12% bias) and from 102-105% (< or =5% bias), respectively. The mean intra- and inter-day assay precision was less than 15.0 and 11.8% for all QC levels, respectively. For the QC samples prepared in animal species plasma, the %CV values of the assays ranged from 1.8-8.8% in mouse plasma, from 3.7-13.8% in rat plasma, and from 3.0-7.2% in dog plasma. The assay accuracies ranged from 92-102% (< or =8% bias) for all QC levels prepared in mouse plasma; ranged from 93-106% (< or =7% bias) in rat plasma; and ranged from 95-114% (< or =14% bias) in dog plasma. The assay has been used to support preclinical pharmacokinetic and toxicokinetic studies and is currently used to measure PM00104 plasma concentrations to support clinical trials.     

On the surface modification of microchannels for microcapillary electrophoresis chips

This paper presents systematic investigation of the microchannel surface properties in microCE chips. Three popular materials for microCE chips, polydimethylsiloxane (PDMS), quartz, and glass, are used. The zeta potentials of these microchannels are calculated by measuring the EOF velocity to evaluate the surface properties after surface modification. The hydrophobic PDMS is usually plasma-treated for microCE applications. In this study, a new method using a high-throughput atmospheric plasma generator is adopted to treat the PDMS surface under atmospheric conditions. In this approach, the cost and time for surface treatment can be significantly reduced compared with the conventional vacuum plasma generator method. Experimental results indicate that new functional groups could be formed on the PDMS surface after treatment, resulting in a change in the surface property. The time-dependent surface property of the plasma-treated PDMS is then measured in terms of the zeta potential. Results show that the surface property will reach a stable condition after 1 h of plasma treatment. For glass CE chips, two new methods for changing the microchannel surface properties are developed. Instead of using complicated and time-consuming chemical silanization procedures for CE channel surface modification, two simple and reliable methods utilizing organic-based spin-on-glass and water-soluble acrylic resin are reported. The proposed method provides a fast batch process for controlling the surface properties of glass-based CE channels. The proposed methods are evaluated using PhiX-174 DNA maker separation. The experimental data show that the surface property is modified and separation efficiency greatly improved. In addition, the long-term stability of both coatings is verified in this study. The methods proposed in this study show potential as an excellent solution for glass-based microCE chip surface modification.     

Determination of As(III) and As(V) ions by chemiluminescence method

A new chemiluminescence (CL) method for the selective determination of As(III) and As(V) ions in aqueous solution has been studied using a FIA system. The method is based on the increased CL intensity with the addition of As(V) ion into a solution of lucigenin and hydrogen peroxide. The addition of As(III) ion into the solution did not change the CL intensity. Total concentration of As ions was determined after pre-oxidation of As(III) to As(V) with hydrogen peroxide in basic solution. The As(III) content was estimated by subtracting the content of As(V) ion from total As concentration. The effects of concentrations of KOH and H₂O₂, and flow rates of reagents on CL intensity have been investigated. The calibration curve for As(V) ion was linear over the range from 1.0×10^-2 to 10 μg/g, the coefficient of correlation was 0.997 and the detection limit was 5.0×10^-3 μg/g under the optimal experimental conditions.     

W(CO)5(L)-catalyzed endo-selective cyclization of allenyl silyl enol ethers: an efficient method for the cyclopentene annulation onto alpha,beta-unsaturated ketones

[reaction: see text] Indium-mediated allenylation of alpha,beta-unsaturated ketones in the presence of tert-butyldimethylsilyl triflate and dimethyl sulfide gives 6-siloxy-1,2,5-trienes, which undergo W(CO)(5)(L)-catalyzed 5-endo cyclization to give the corresponding cyclopentene derivatives in good yield. Furthermore, this novel W(CO)(5)(L)-catalyzed cyclization of allenyl silyl enol ethers proceeds in a 6-endo manner when 5-siloxy-1,2,5-trienes are employed as a substrate. In these reactions, effective electrophilic activation of allenyl compounds for attack by silyl enol ethers is achieved using a catalytic amount of W(CO)(6).     

Detection of DNA adducts of benzo[a]pyrene using immunoelectrophoresis with laser-induced fluorescence. Analysis of A549 cells

Detection of benzo[a]pyrene diol epoxide (BPDE)-damaged DNA in a human lung carcinoma cell line (A549) has been performed using free zone affinity capillary electrophoresis with laser-induced fluorescence (LIF). Using BPDE as a model carcinogenic compound, the speed, sensitivity and specificity of this technique was demonstrated. Under free zone conditions, an antibody bound adduct was baseline-resolved from an unbound adduct in less than 2 min. The efficiencies of separation were in excess of 6 x 10(5) and 1 x 10(6) plates per meter for the antibody-bound and unbound adducts, respectively. Separation using a low ionic strength buffer permitted the use of a high electric field (830 V/cm) without the loss of resolving power. Using LIF detection, a concentration detection limit of roughly 3 x 10(-10) M was achieved for a 90-mer oligonuleotide containing a single BDPE. The use of formamide in the incubation buffer to enhance denaturing of DNA did not affect the stability of the complex between the antibody and the adducts. Using a fluorescently labeled BPDE-modified DNA adduct probe, a competitive assay was established to determine the levels of BPDE-DNA adducts in A549 cells.     

Colorimetric anion chemosensor based on 2-aminobenzimidazole: naked-eye detection of biologically important anions

We synthesized a novel colorimetric anion chemosensor bearing benzimidazole motifs as recognition sites in the pods of the receptor. The addition of tetrabutylammonium salts of F⁻ or AcO⁻ to the solution of receptor caused dramatic color changes from colorless to yellow, which was clearly visible to the naked eye. The receptor showed no significant changes on addition of other anions such as Cl⁻, Br⁻, I⁻, NO₃⁻, and H₂PO₄⁻.     

New C2-symmetric 2,2′-bipyridine crown macrocycles for enantioselective recognition of amino acid derivatives

A series of new C₂-symmetric 2,2′-bipyridine-contaning crown macrocycles 1-4 has been developed for enantiomeric recognition of amino acid derivatives. These new macrocycles have been showed to be strong complexing agents for primary organic ammonium salts (with K up to 4.83×10⁵ M⁻¹ and −ΔG₀ up to 32.4 kJ mol⁻¹) and also useful chromophores for UV-vis titration studies. These macrocyclic hosts exhibited enantioselective binding towards the (S)-enantiomer of phenylglycine methyl ester hydrochloride (Am1) with K_(S)/K_(R) up to 2.10 (ΔΔG₀=−1.84 kJ mol⁻¹) in CH₂Cl₂ with 0.25% CH₃OH. The structure-binding relationship studies showed that the aromatic subunit and the ester group of the ammonium guests are both important for good enantioselectivity. In addition, the host-guest complexes have been studied using various NMR experiments.     

Synthesis of 4b,5,10a,11-tetrahydroindeno[1,2-b]quinolin-10-ones from Baylis-Hillman adducts

We developed an efficient synthetic method for indenoquinoline skeletons from Baylis-Hillman adducts. 4b,5,10a,11-Tetrahydroindeno[1,2-b]quinolin-10-ones and 7H-indeno[2,1-c]quinolines were prepared from Baylis-Hillman adducts in polyphosphoric acid.     

A new synthesis of 1,2,3,5‐tetrahydroimidazo[2,3‐b]‐[1,3]benzodiazocines

A new synthesis of 6‐carbomethoxy‐1,2,3,5‐tetrahydroirnidazo[2,3‐b][1,3]benzodiazocines 13 by the intramolecular cycloaddition reaction of methyl 2‐(1‐aziridinylmethyl)‐3‐(2‐ureidophenyl)propenoates 10 under Appel's dehydration conditions is described. The latter were readily obtained from 2‐nitrobenzalde‐hyde with methyl acrylate through the Baylis‐Hillman reaction.