Analogue implementation of a neural network controller for UPSinverter applications

An analogue neural-network controller for UPS inverter applications is presented. The proposed neural-network controller is trained off-line using patterns obtained from a simulated controller, which had an idealized load-current-reference. Simulation results show that the proposed neural-network controller can achieve low total harmonic distortion under nonlinear loading condition and good dynamic responses under transient loading condition. To verify the performance of the proposed NN controller, a hardware inverter with an analogue neural network (NN) controller (using mainly operational amplifiers and resistors) is built. Additionally, for comparison purposes, a PI controller with optimized parameters is built. Experimental results confirm the simulation results and show the superior performance of the NN controller especially under rectifier-type loading condition. Implementing the analogue neural-network controller using programmable integrated circuits is also discussed     

Electromagnetic interference mitigation by using a spread-spectrumapproach

We investigate a new technique, referred to as spread-spectrum clock generation (SSCG), for reducing the level of radiated emission from devices with digital clock signals. To calculate the radiated emissions from such devices, we model the radiating geometry and compute the radiated field at a multitude of frequencies by using NEC-4, which is an electromagnetic field solver based on the method of moments (MoM). We consider a variety of modulating profiles for the spread spectrum clock and demonstrate that by using a frequency deviation of only 1%, we can achieve from 10 to 30 dB reduction in the radiated emission levels     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Growth temperature dependence of low-noise MESFET in molecular-beam epitaxy

The substrate growth temperature dependence of electrical properties for a low-noise MESFET fabricated on MBE-grown material has been demonstrated. The optimum noise figure and its associated gain were attributed to the higher epilayer quality and mobility at a growth temperature of 650°C between temperatures of 550°C and 700°C.     

Complex homogeneous splines on the torus

We construct functions M_α which are piecewise homogeneous polynomials on the (d+1)-dimensional torus U^d+1. These functions possess complete symmetry with respect to the independent variables. The symmetry and homogeneous relations for these functions are exploited to obtain a recurrence relation and explicit representations. Furthermore, we show that , where ω=e^12x/k, 0≤j_t≤k−1, are linearly independent. By restricting M_α to U^d, we obtain the complex analogue of polynomial box splines on a (d+1)-direction mesh on U^d, which is a multivariate analogue of B-splines on the circle studied by I.J. Schoenberg^[8].     

Experimental results of a high Q quasioptical reflection cavity

A quasi-optical reflection cavity intended to be used as the resonant load of a submillimeter wavelength oscillator has been designed, constructed, and tested. The resonator consists of three elements in cascade: a high Q, high finesse folded Fabry-Perot resonator, a lower Q, low finesse Fabry-Perot resonator, and a Littrow mounted diffraction grating. The resonator exhibits a Q of 6600 and 2.5 dB of loss at 63 GHz. The design can be scaled to 1 THz, where waveguide structures become impractical, to serve as the resonator for high frequency quantum well resonant tunneling device oscillators.