Effect of Molecular Structure on Complexation Between Acidic- and Basic-Polypeptides in Solution

Abstract

Interpolymer complex formation between basic polypeptides, poly(L- proline) Form I [PLP(I)], Form II [PLP(II)] and poly-4-hydroxy-L-proline (PHLP), and acidic polypeptides, poly(L-glutamic acid) (PLGA), poly(D- glutamic acid) (PDGA) and poly(L-aspartic acid) (PLAA), has been studied in water-methanol (1:2 v/v) mixed-solvent by viscometry, potentiometry, light scattering and circular dichroism (CD) measurements. It has been found that polymer complexes between basic- and acidic- polypeptides are formed via hydrogen bonding with a stoichiometric ratio of basic/acidic polypeptides =1:2 (in unit mole ratio) and that PLP(II) forms polymer complex more favorably with PLGA than with PLAA, and the complex of PLP(II) with PLGA is also more favorable than the complex formation of PHLP with PLGA. In addition, the complex formation is highly dependent on the conformation, especially the optical structure of the component polymers, i.e., the stereoselective complexation is observed. The PLGA having a right-handed helix at pH 3.2 formed the complex favorably and quickly with left-handed helix PLP(II), whereas PDGA having a left-handed helix at pH 3.2 favorably formed the complex with right-handed helix PLP(I).     

Assembly of peptide–thiophene conjugates: the influence of peptide content and location

Biomolecule-directed self-assembly of π-conjugated oligomers has attracted great attention in the past decade. In this contribution, two conjugates composed of quaterthiophene and tetrapeptide (Gly-Val-Gly-Val) were synthesised, namely peptide–thiophene–peptide (PTP) and thiophene–peptide–thiophene (TPT), to investigate the influence of peptide content ratio and its location in the molecular structures on the nanostructures and properties of the assemblies. Both conjugates formed organogels consisting of left-handed twisted nanostructures; however, anti-parallel β-sheets were observed in PTP while parallel β-sheets were obtained for TPT, although in both cases oligothiophenes adopted an H-like stacking mode. Obvious solvent-induced supramolecular chirality inversion from the oligothiophene segment was observed for PTP while such phenomenon was not clear for TPT. PTP and TPT gels also showed different stabilities towards temperature increase, as evidenced by variable-temperature circular dichroism study. From the data, it is suggested that the rational design of the location and ratio of peptide plays a key role in constructing materials with determined properties based on peptide–thiophene conjugates.     

Eco-friendly synthesis of high silica zeolite Y with choline as green and innocent structure-directing agent

Zeolite synthesis in contemporary chemical industries is predominantly conducted using organic structure-directing agents (OSDAs), which are chronically hazardous to humans and the environment. It is a growing trend to develop an eco-friendly and nuisanceless OSDA for zeolite synthesis. Herein, choline is employed as a non-toxic and green OSDA to synthesize high silica Y zeolite with SiO₂/Al₂O₃ ratios of 6.5–6.8. The prepared Y zeolite samples exhibited outstanding (hydro)thermal stability at ultrahigh temperature owing to the higher SiO₂/Al₂O₃ ratio. The XRF, SEM, ²⁹Si-NMR and ¹³Na+ results suggested that choline plays a structure-directing role in the synthesis of Y zeolite, while the feed molar fraction of Na⁺ is a crucial determinant for the framework SiO₂/Al₂O₃ ratio and the crystal morphology.     

Quantitative analysis of tea using ytterbium‐based internal standard near‐infrared spectroscopy coupled with boosting least‐squares support vector regression

The present study demonstrated the possibility of utilizing the ytterbium (Yb)‐based internal standard near‐infrared (NIR) spectroscopic measurement technique coupled with multivariate calibration for quantitative analysis of tea, including total free amino acids and total polyphenols in tea. Yb is a rare earth element aimed to compensate for the spectral variation induced by the alteration of sample quantity during the spectral measurement of the powdered samples. Boosting was invoked to be combined with least‐squares support vector regression (LS‐SVR), forming boosting least‐squares support vector regression (BLS‐SVR) for the multivariate calibration task. The results showed that the tea quality could be accurately and rapidly determined via the Yb‐based internal standard NIR spectroscopy combined with BLS‐SVR method. Moreover, the introduction of boosting drastically enhanced the performance of individual LS‐SVR, and BLS‐SVR compared favorably with partial least‐squares regression. Copyright © 2013 John Wiley & Sons, Ltd.     

Photovoltaic Performance of Triphenylamine Dyes-sensitized Solar Cells Employing Cobalt Redox Shuttle and Influence of π-conjugated Spacers

Developing photosensitizers suitable for the cobalt electrolyte and understanding the structure-property relationship of organic dyes is warranted for the dye-sensitized solar cells (DSSCs). The DSSCs incorporating tris(1,10-phenanthroline)cobalt(II/III)-based redox elec-trolyte and four synthesized organic dyes as photosensitizers are described. The photovoltaic performance of these dyes-sensitized solar cells employing the cobalt redox shuttle and the influences of the π-conjugated spacers of organic dyes upon the photovoltage and photocur-rent of mesoscopic titania solar cells are investigated. It is found that organic dyes with thiophene derivates as linkers are suitable for DSSCs employing cobalt electrolytes. DSSCs sensitized with the as-synthesized dyes in combination with the cobalt redox shuttle yield an overall power conversion efficiency of 6.1% under 100 mW/cm² AM1.5 G illumination.     

CO加氢制备低碳烯烃Fe基、Co基催化剂研究进展

CO加氢制备低碳烯烃是非石油路线获得烯烃的重要反应,其反应路线有直接法和间接法。直接法制备低碳烯烃具有反应路线短、能源利用率高、经济高效等优势。综述了近年来Fe基催化剂、Co基催化剂在CO直接制备低碳烯烃中的研究进展。分析认为：费托合成过程产物选择性遵循Anderson-Schulz-Flory（ASF）分布规律,助剂和载体的使用一定程度提高Fe基、Co基催化剂的低碳烯烃选择性。     

新型混合脂肪基咪唑类衍生物的合成

以工业回收的精制地沟油、邻苯二胺、乙二胺及其衍生物为原料,经酰化-环化“一锅”反应合成了7种混合脂肪基咪唑类化合物（包括3种新化合物）,其结构经UV-Vis, ¹H NMR, ¹³C NMR, IR和GC MS表征。     

Investigation on two triphenylene based electron transport materials

Promoting electron mobility is the key to designing high performance electron transport materials(ETMs). Formation of intermolecular interaction can be helpful to enhance their electron mobilities as a result of more ordered molecular stacking.Here, to reveal the inherent influence of intermolecular π-π stacking on the electron mobilities, we designed two ETMs, namely,2,4-diphenyl-6-[3-(2-triphenylenyl)phenyl]-1,3,5-triazine(TPTRZ) and 2,4-diphenyl-6-[4′-(2-triphenylenyl)[1,1′-biphenyl]-3-yl]-1,3,5-triazine(TPPTRZ). Thermal, photophysical and electrochemical measurement results indicate they are good ETM candidates. Additionally, TPTRZ and TPPTRZ exhibit high electron mobilities of 3.60×10~(-5) and 3.58×10~(-5) cm~2V-1 s~(-1), respectively, at an electric field of 7×10~5 V cm~(-1). By taking X-ray single crystal structure, theoretical calculation and time of flight(TOF) results into consideration, it is revealed that strong intermolecular π-π stacking induced by planar triphenylene and triphenyltriazine units renders TPTRZ and TPPTRZ small energetic and positional disorder parameters, and results in their high electron mobilities thereby. By further enhancing intermolecular π-π stacking, ETMs with even higher electron mobilities can thus be anticipated.     

Effects of Zn, Al and Ti substitution on the electrochemical properties of LiNiO2 synthesized by the combustion method

LiNi_{1 ? y} Ti _y O₂ (0.000 ≤ y ≤ 0.100) and LiNi_0.990M_0.010O2 (M = Zn, Al, and Ti) were synthesized by the combustion method. The effects of Zn, Al and Ti substitution for Ni of LiNiO₂ on the electrochemical properties of LiNiO₂ were investigated. LiNi_0.995Ti_0.005O₂ has the largest first discharge capacity (188.1 mA h/g) among the Ti-substituted samples. LiNi_0.990Ti_0.010O₂ has a relatively large first discharge capacity (185.5 mA h/g) and a relatively good cycling performance. Among LiNi_0.990M_0.010O₂ (M = Ni, Zn, Al, and Ti), LiNiO₂ has the largest discharge capacities at a rate of 0.1 C from n = 1(189.3 mA h/g) to n = 10. LiNi_0.990Al_0.010O₂ has the lowest discharge capacities from n = 1 to n = 10, but it has the best cycling performance. LiNi_0.990Zn_0.010O₂ showed poor crystallinity, LiNi_0.990Ti_0.010O₂ showed high cation mixing, and LiNi_0.990Al_0.010O₂ had good crystallinity and showed low cation mixing. Fewer occurrence of phase transitions and the least change of the ?dx/|dV| vs. voltage curve at the second cycle from the curve at the first cycle of LiNi_0.990Al_0.010O₂ suggest that Al substitution stabilizes the structure and leads to a good cycling performance.     

Fluorescence-based immunoassay for human chorionic gonadotropin based on polyfluorene-coated silica nanoparticles and polyaniline-coated Fe3O4 nanoparticles

We report on an ultrasensitive fluorescence immunoassay for human chorionic gonadotrophin antigen (hCG). It is based on the use of silica nanoparticles coated with a copolymer (prepared from a fluorene, a phenylenediamine, and divinylbenzene; PF@SiO₂) that acts as a fluorescent label for the secondary monoclonal antibody to β-hCG antigen. In parallel, Fe₃O₄ nanoparticles were coated with polyaniline, and these magnetic particles (Fe₃O₄@PANI) served as a solid support for the primary monoclonal antibody to β-hCG antigen. The PF@SiO₂ exhibited strong fluorescence and good dispersibility in water. A fluorescence sandwich immunoassay was developed that enables hCG concentrations to be determined in the 0.01–100 ng·mL^?1 concentration range, with a detection limit of 3 pg·mL^?1.