Ultrathin two-dimensional MnO2 nanosheet as a stable coreactant of 3,3′,5,5′-tetramethylbenzidine chromogenic substrate for visual and colorimetric detection of iron(II) ion

Microchimica Acta - The authors report on a chromogenic system based MnO2 nanosheet and the chomgenic substrate 3,3′,5,5′-tetramethylbenzidine (TMB). The MnO2 nanosheet can oxidize TMB...     

Preparation and Characterization of Chitosan-Blended Multiwalled Carbon Nanotubes

Composites comprised of chitosan (CS) and multiwalled carbon nanotubes (MWCNTs) were fabricated by milling and ultrasonication dispersion methods. Scanning electron microscopy images showed homogeneous dispersion of MWCNTs throughout the CS matrix for samples prepared by either ultrasonication or milling methods. Further, the crystallinity of the CS component was found to decrease with the addition of MWCNTs, although the decomposition temperature and the storage modulus (E′) of the samples were improved. The decomposition temperature for the composite prepared by milling was 7°C higher than that by the ultrasonication. Meanwhile, the E′ decreased relatively slowly with temperature in the dynamic mechanical analysis measurements. In addition, IR analysis implied an interaction between CS and MWCNTs, which likely originated from hydrogen bonds between the amino, hydroxyl, and carboxyl groups of the two components. Compared with the ultrasonication, milling was more effective to promote the formation of the hydrogen bonds between CS and the MWCNTs and thus enhance the thermal stability of CS.     

Baeyer-Villiger Oxidation of Cyclohexanone with Molecular Oxygen in the Presence of Benzaldehyde

The metal-catalyzed Baeyer-Villiger oxidation of cyclohexanone with molecular oxygen (latm) in the presence of benzaldehyde gives δ -caprolactone in high yield. The same oxidation in the absence of metal catalysts is also studied. Additives to the system can improve the reaction highly efficiently.     

New designed DNA light switch Ruthenium complexes as DNA photocleavers and Topoisomerase I inhibitors

Two ruthenium complexes containing a new ligand phipz (phipz = 2‐(1,10‐phenanthroline)‐1H‐imidazo[4,5‐b]phenazine) were designed and synthesized. These complexes were found to inhibit the DNA supercoiled relaxation mediated by topoisomerase I (topo I), cleave DNA under irradiation and bind to calf thymus DNA through intercalative mode. Furthermore, complex 2 shows higher photocleavage activity, topo I inhibition activity and DNA affinity than complex 1 . Additionally, introduction of phenazine unit may be the reason that two complexes exhibit DNA ‘light switch’ behavior. The present work shows that two complexes might be potential as new DNA ‘light switches’, DNA photocleavers and topo I inhibitors.     

新郑西亚斯东周玉器材料属性与加工工艺的科技分析

中国玉文化源远流长，治玉工艺经过各个时代的不断发展和完善，在一定程度上能反映古代社会生产力发展水平及文化、贸易、技术交流等信息。利用能量色散型X射线荧光光谱（EDXRF）、激光拉曼光谱（LRS）、超景深光学显微系统（OM）等分析技术，结合硅胶覆膜微痕复制技术，对河南省新郑西亚斯东周墓地出土的一批玉器进行科技分析。首先利用化学成分和物相结构分析技术确定了玉器材质的矿物属性，其次利用显微分析技术表征了玉器表面及穿孔内部和印模的加工痕迹，特别是阴刻纹饰和穿孔微痕特征，最后探讨了玉器样品的材料属性和加工工艺两者之间的联系。化学成分和物相结构分析结果表明，所分析的西亚斯东周玉器材质丰富，主要矿物组成有滑石、透闪石、水晶、云母等。玉器表面纹饰微痕特征分析表明，所分析玉器阴刻工艺采用了两种加工工具，分别是砣具和手持硬质工具。穿孔微痕分析特征表明，钻孔包括单面钻孔和双面/多面钻孔两种方式，钻孔工艺则有实心钻、管钻等。部分玉器钻孔形状和内部微痕特征表明，尽管均采用了实心钻工艺，但所采用的实心钻头在形状上存在差异，同时，也存在是否配合解玉砂进行钻孔的差异。不同材料属性的玉器采用了不同的加工工艺。滑石质玉器，莫氏硬度1，器型主要为玉片饰，其表面阴刻纹饰主要采用手持硬质工具进行刻画，钻孔主要采用了双面钻孔方式，并使用了实心钻头未添加解玉砂进行加工，钻头形状可能为圆锥状；云母质玉器，莫氏硬度2~3，器型主要为玉玦片饰，纹饰采用了砣具添加解玉砂的加工工艺，钻孔方式为单面钻孔，采用了管钻工艺。透闪石型玉器，莫氏硬度5~6，器型主要为玉片饰，表面纹饰采用砣具配合解玉砂砣刻，以双面钻孔的方式为主，钻孔工艺为实心钻头配合解玉砂工艺，钻头形状与滑石类样品一致，为圆锥状。水晶质玉器，莫氏硬度7，均为珠饰，表面无纹饰，钻孔方式为双面/多面钻孔，钻孔工艺为实心钻配合解玉砂工艺，且钻头可能为圆柱形。研究结果表明，玉器表面纹饰所采用的阴刻工艺和钻孔工艺，与玉器本身的材料属性、器型等存在密切关系。     

Investigating effect of pH values on CeSiW catalyst for the selective catalytic reduction of NO by NH3

Research on Chemical Intermediates - The effect of different pH values (8, 9, 10 and 11) on the catalytic activity over CeSiW catalysts was investigated for the selective catalytic reduction of NO...