Characterization of Glycan Structures of Chondroitin Sulfate-Glycopeptides Facilitated by Sodium Ion-Pairing and Positive Mode LC-MS/MS

Purification and liquid chromatography-tandem mass spectrometry (LC-MS/MS) characterization of glycopeptides, originating from protease digests of glycoproteins, enables site-specific analysis of protein N- and O-glycosylations. We have described a protocol to enrich, hydrolyze by chondroitinase ABC, and characterize chondroitin sulfate-containing glycopeptides (CS-glycopeptides) using positive mode LC-MS/MS. The CS-glycopeptides, originating from the Bikunin proteoglycan of human urine samples, had ΔHexAGalNAcGlcAGalGalXyl-O-Ser hexasaccharide structure and were further substituted with 0-3 sulfate and 0-1 phosphate groups. However, it was not possible to exactly pinpoint sulfate attachment residues, for protonated precursors, due to extensive fragmentation of sulfate groups using high-energy collision induced dissociation (HCD). To circumvent the well-recognized sulfate instability, we now introduced Na⁺ ions to form sodiated precursors, which protected sulfate groups from decomposition and facilitated the assignment of sulfate modifications. Sulfate groups were pinpointed to both Gal residues and to the GalNAc of the hexasaccharide structure. The intensities of protonated and sodiated saccharide oxonium ions were very prominent in the HCD-MS2 spectra, which provided complementary structural analysis of sulfate substituents of CS-glycopeptides. We have demonstrated a considerable heterogeneity of the bikunin CS linkage region. The realization of these structural variants should be beneficial in studies aimed at investigating the importance of the CS linkage region with regards to the biosynthesis of CS and potential interactions to CS binding proteins. Also, the combined use of protonated and sodiated precursors for positive mode HCD fragmentation analysis will likely become useful for additional classes of sulfated glycopeptides.

Open image in new window

Graphical Abstract ?

     

Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries

The pore structure of the separator is crucial to the performance of a lithium-battery as it affects the cell resistance. Herein, a straightforward approach to vary the pore structure of Cladophora cellulose (CC) separators is presented. It is demonstrated that the pore size and porosity of the CC separator can be increased merely by decreasing the thickness of the CC separator by using less CC in the manufacturing of the separator. As the pore size and porosity of the CC separator are increased, the mass transport through the separator is increased which decreases the electrolyte resistance in the pores of the separator. This enhances the battery performance, particularly at higher cycling rates, as is demonstrated for LiFePO₄/Li half-cells. A specific capacity of around 100 mAh g^?1 was hence obtained at a cycling rate of 2 C with a 10 µm thick CC separator while specific capacities of 40 and close to 0 mAh g^?1 were obtained for separators with thicknesses of 20 and 40 µm, respectively. As the results also showed that a higher ionic conductivity was obtained for the 10 µm thick CC separator than for the 20 and 40 µm thick CC separators, it is clear that the different pore structure of the separators was an important factor affecting the battery performance in addition to the separator thickness. The present straightforward, yet efficient, strategy for altering the pore structure hence holds significant promise for the manufacturing of separators with improved performance, as well as for fundamental studies of the influence of the properties of the separator on the performance of lithium-ion cells.     

Delay resistant line planning with a view towards passenger transfers

The line planning step, as part of the public transportation planning process, is an elementary problem. When generating public transportation systems in a conventional fashion, the line planning problem is one of the first to solve. Hence, subsequent problems rely on the solution of the line planning problem. Line planning has been studied from various perspectives and is understood very well. Still, the effect of this planning step on to the next ones has only received minor attention. In this paper, we study the effect of transfers on the delay resistance and propose a line planning model which provides a good basis for a delay resistant transportation system. To this end, the concept of preferable paths from the direct travelers line planning model is further extended. The model includes the routing of passengers in order to minimize passenger transfers. A column generation approach is shown to properly solve the proposed model. As such, this is the first line planning model which detailedly routes the passengers and is still tractable on realistically sized instances. Finally, it is shown that minimizing the passenger transfers at the line planning stage contributes to an increasing delay resistance in the public transportation system.     

Influence of metal loading and humic acid functional groups on the complexation behavior of trivalent lanthanides analyzed by CE-ICP-MS

The complexation behavior of Aldrich humic acid (AHA) and a modified humic acid (AHA-PB) with blocked phenolic hydroxyl groups for trivalent lanthanides (Ln) is compared, and their influence on the mobility of Ln(III) in an aquifer is analyzed. As speciation technique, capillary electrophoresis (CE) was hyphenated with inductively coupled plasma mass spectrometry (ICP-MS). For metal loading experiments 25 mg L⁻¹ of AHA and different concentrations (c_Ln(Eu+Gd) = 100–6000 μg L⁻¹) of Eu(III) and Gd(III) in 10 mM NaClO₄ at pH 5 were applied. By CE-ICP-MS, three Ln-fractions, assumed to be uncomplexed, weakly and strongly AHA-complexed metal can be detected. For the used Ln/AHA-ratios conservative complex stability constants log β_LnAHA decrease from 6.33 (100 μg L⁻¹ Ln³⁺) to 4.31 (6000 μg L⁻¹ Ln³⁺) with growing Ln-content. In order to verify the postulated weaker and stronger humic acid binding sites for trivalent Eu and Gd, a modified AHA with blocked functional groups was used. For these experiments 500 μg L⁻¹ Eu and 25 mg L⁻¹ AHA and AHA-PB in 10 mM NaClO₄ at pH-values ranging from 3 to 10 have been applied. With AHA-PB, where 84% of the phenolic OH-groups and 40% of the COOH-groups were blocked, Eu complexation was significantly lower, especially at the strong binding sites. The log β-values decrease from 6.11 (pH 10) to 5.61 at pH 3 (AHA) and for AHA-PB from 6.01 (pH 7) to 3.94 at pH 3. As a potential consequence, particularly humic acids with a high amount of strong binding sites (e.g. phenolic OH- and COOH-groups) can be responsible for a higher metal mobility in the aquifer due to the formation of dissolved negatively charged metal-humate species.     

Analytical gradients of the second‐order Møller–Plesset energy using Cholesky decompositions

An algorithm for computing analytical gradients of the second‐order Møller–Plesset (MP2) energy using density fitting (DF) is presented. The algorithm assumes that the underlying canonical Hartree–Fock reference is obtained with the same auxiliary basis set, which we obtain by Cholesky decomposition (CD) of atomic electron repulsion integrals. CD is also used for the negative semidefinite MP2 amplitude matrix. Test calculations on the weakly interacting dimers of the S22 test set (Jure?ka et al., Phys. Chem. Chem. Phys. 2006, 8, 1985) show that the geometry errors due to the auxiliary basis set are negligible. With double‐zeta basis sets, the error due to the DF approximation in intermolecular bond lengths is better than 0.1 pm. The computational time is typically reduced by a factor of 6–7. © 2013 Wiley Periodicals, Inc.     

Frequency based preconditioning and smoothing for shape optimization

In this paper, we present a smoothing technique which can be understood as a Quasi-Newton method. The idea of this preconditioner is that it approximates the symbol of the inverse Hessian, which has smoothing behavior. This symbol is derived analytically for the Stokes equations and investigated numerically for a flow with a Reynolds number of 80. The resulting symbol is then approximated by differential operators, which will lead to a method similar to Sobolev Smoothing. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Correlation between the structure and wettability of photoswitchable hydrophilic azobenzene monolayers on silicon

Photoresponsive monolayers of hydrophilically substituted azobenzenes have been prepared by reaction on aminosilane monolayers on silicon surfaces. Grafting densities in the 0.2-1.0 molecule/nm(2) range were determined by X-ray reflectometry. The monolayers exhibit reversible photoisomerization, switching from a more hydrophilic trans state to a less hydrophilic cis state upon UV irradiation, in contrast with the usual behavior of most azobenzene monolayers that switch from a less to a more hydrophilic state. This indicates that the wettability is not dominated by the change in the dipole moment of the azobenzene moiety but originates from variations in the composition of the outer surface of the monolayers resulting from the reorientation of the substituent groups. The light-driven change in the water contact angle correlates linearly with the grafting density but remains small. However, the wettability contrast can be increased by forcing the molecules to stand in an improved vertical orientation, either by densifying the underlying aminosilane monolayer or by filling the voids left at the bottom of the layer of grafted azobenzene molecules.     

Electrospinning of a functional perfluorinated block copolymer as a powerful route for imparting superhydrophobicity and corrosion resistance to aluminum substrates

Superhydrophobic aluminum surfaces with excellent corrosion resistance were successfully prepared by electrospinning of a novel fluorinated diblock copolymer solution. Micro- and nanostructuration of the diblock copolymer coating was obtained by electrospinning which proved to be an easy and cheap electrospinning technology to fabricate superhydrophobic coating. The diblock copolymer is made of poly(heptadecafluorodecylacrylate-co-acrylic acid) (PFDA-co-AA) random copolymer as the first block and polyacrylonitrile (PAN) as the second one. The fluorinated block promotes hydrophobicity to the surface by reducing the surface tension, while its carboxylic acid functions anchor the polymer film onto the aluminum surface after annealing at 130 °C. The PAN block of this copolymer insures the stability of the structuration of the surface during annealing, thanks to the infusible character of PAN. It is also demonstrated that the so-formed superhydrophobic coating shows good adhesion to aluminum surfaces, resulting in excellent corrosion resistance.     

Optical waveguides for the evanescent wave-induced cleavage of photolabile linker compounds

Functional surfaces and especially the control of surface properties depending on external parameters such as light illumination have gained increasing importance in the last few years. We present the characterization of polymers from the cycloolefin (co)polymer class (COC/COP) functionalized with an aminosilane as a basis for the further immobilization of compounds. In a first step, an assay using AlexaFluor?647 fluorescent dye was used to assess surface homogeneity and reproducibility. A coefficient of variation of less than 15% for dot-to-dot and less than 25% for chip-to-chip could be achieved. The same amino-functionalized surfaces were then used to immobilize a biotinylated photolabile linker compound, binding AlexaFluor?647-labeled streptavidin. The linker was photocleaved with high efficiency at λ = 365 nm and P = 0.15 mW/cm². Fluorescence measurements show that polymers of the COC/COP class can be used as versatile surfaces for the photoinduced release of compounds immobilized via photolabile linkers.     

Pseudo-unitarizable weight modules over generalized Weyl algebras

We define a notion of pseudo-unitarizability for weight modules over a generalized Weyl algebra (of rank one, with commutative coefficient ring R), which is assumed to carry an involution of the form X^∗=Y, R^∗⊆R. We prove that a weight module V is pseudo-unitarizable iff it is isomorphic to its finitistic dual V^?. Using the classification of weight modules by Drozd, Guzner and Ovsienko, we obtain necessary and sufficient conditions for an indecomposable weight module to be isomorphic to its finitistic dual, and thus to be pseudo-unitarizable. Some examples are given, including U_q(sl₂) for q a root of unity.