Influence of glymes upon percolative phenomena in AOT-based microemulsions

A study was carried out on the influence of different polyethylene glycol dimethyl ethers (glymes) on the conductance percolation of AOT/isooctane/water microemulsions. The glymes used were chosen on the basis of this chain length (the number of polymeric units). In all cases we observed a decrease in the percolation threshold on increasing the amount of a glyme added to the microemulsion. We observed a correlation between the effect exerted by the glyme and its chain length, which shows the importance of including them in the interface for the percolative phenomenon. Such inclusion modifies the properties of the AOT film, facilitating the exchange of matter between droplets.     

Stereochemical Consequences of the Bismuth Atom Electron Lone Pair, a Comparison between MX(6)E and MX(6) Systems. Crystal and Molecular Structures of Tris[N-(P,P-diphenylphosphinoyl)-P,P-diphenylphosphinimidato]bismuth(III), [Bi{(OPPh(2))(2)N}(3)], -indium(III), [In{(OPPh(2))(2)N}(3)].C(6)H(6), and -gallium(III), [Ga{(OPPh(2))(2)N}(3)].CH(2)Cl(2)

The tetraphenylimidodiphosphinate [N-(P,P-diphenylphosphinoyl)-P,P-diphenylphosphinimidate] ion forms stable tris-chelates with the Bi(III), In(III), and Ga(III) cations. The crystal and molecular structures of [M{(OPPh(2))(2)N}(3)] (M = Ga, In, Bi) were determined by X-ray diffractometry. The geometry around the bismuth atom in compound 3 displays an approximately C(3)(v)() symmetry. This arrangement suggests the presence of a stereoactive lone pair of electrons, which is located in one of the triangular octahedral faces. Derivative 3 crystallizes in the triclinic space group P&onemacr; with Z = 2, a = 14.006(6) ?, b = 14.185(4) ?, c = 17.609(8) ?, alpha = 88.45(2) degrees, beta = 79.34(2) degrees, and gamma = 78.23(2) degrees. The structures of the gallium(III) and indium(III) tris-chelate oxygen-based complexes (1 and 2, respectively) were compared with the bismuth analogue in order to determine the ligand steric bulk influence on the coordination sphere in the absence of the electron lone pair. Complex 1 crystallizes as the [Ga{(OPPh(2))(2)N}(3)].CH(2)Cl(2) solvate in the triclinic space group P&onemacr;; Z = 2, a = 13.534(4) ?, b = 13.855(4) ?, c = 18.732(7) ?, alpha = 95.48(2) degrees, beta = 98.26(2) degrees, and gamma = 97.84(2) degrees. Crystal data for the benzene solvate of 2, [In{(OPPh(2))(2)N}(3)].C(6)H(6): triclinic space group P&onemacr;, Z = 2, a = 13.542(9) ?, b = 15.622(3) ?, c = 18.063(5) ?, alpha = 98.21(1) degrees, beta = 104.77(0) degrees, and gamma = 92.260(0) degrees.     

Gas chromatography/ion trap tandem mass spectrometry for the analysis of halobenzenes in soils by solid-phase microextraction

Headspace solid-phase microextraction combined with gas chromatography/ion trap tandem mass spectrometry (HS-SPME/GC/ITMS/MS) was used for the analysis of 12 halobenzenes from soil samples. For MS/MS optimisation, the experiments were performed by precursor ion selection and software controlled operations. Collision-induced dissociation (CID) can be achieved by two different approaches, resonant and non-resonant excitation modes. Different results were obtained using the two approaches, and the resonant excitation mode was chosen as the best for all halobenzenes. Parameters such as the CID excitation amplitude, excitation RF storage level and CID bandwidth frequency were optimised to maximise the formation of halobenzene product ions. A 100-microm polydimethylsiloxane fibre was used for the isolation and preconcentration of the analytes. The HS-SPME/GC/ITMS/MS method was applied to the analysis of halobenzenes in an agricultural soil sample. The halobenzenes were quantified by standard addition, which led to good reproducibility (RSD between 4.7 and 9.2%) and detection limits in the low pg/g range. The method was validated by comparing the results with those obtained in a European inter-laboratory exercise.     

Comparative study on the determination of cephalexin in its dosage forms by spectrophotometry and HPLC with UV-vis detection

This paper discusses the spectrophotometric determination of cephalexin as the intact cephalexin or as its acid-induced degradation product. Cephalexin can be determined in the range 1 × 10^–5–18 × 10^–5 M with relative standard deviations of 5-1%. The limits of quantitation and detection were 10^–5 and 0.3 × 10^–5 M, respectively. These procedures were compared with reversed-phase HPLC determination. No interference was observed in the presence of common pharmaceutical adjuvants. The H-point standard additions method was applied in order to correct for the possible presence of the cephalexin precursor, 7-aminocephalosporanic acid; this improves the selectivity of the UV-vis spectrophotometric method.     

Modification of Amaya-Sugiura passive sampling spectrophotometric method of nitrogen dioxide determination in ambient air

Summary On the example of the previously tested method of nitrogen dioxide determination in ambient air two aspects of wind influence on the badge-type sampler performance were discussed: an appropriate design of the sampler eliminating any open recess over the face of the sampler and so called starvation effect i.e. decrease in the mass of analyte absorbed by the sampler at wind velocities below 20 cm/s. The wind effect on the performance of the passive sampler has been diminished from about 150% to maximum 20%.     

On Triazoles. XIII. The reaction of 5-benzalimino-1,2,4-triazoles with substituted acetyl chlorides

The reaction of Schiff bases prepared from 1- and 2-substituted-5-amino-1,2,4-triazoles with phenoxyacetyl chlorides in the presence of triethylamine and a mixture of phosphorus oxychloride and dichloroacetic acid in dimethylformamide to yield β-lactam 4 , a dihydro-1,2,4-triazolo[4,3-a]pyrimidine-5(1H)-one 5, a 1,2,4-triazolo[1,5-a]pyrimidin-5(3H)-one 9 and the corresponding 1,2,4-triazolo[4,3-a]pyrimidine-5(1H)-one 10 derivatives was studied.     

Terpenoic acid glycerides from the dorid nudibranch Archidoris montereyensis

Extracts of the dorid nudibranch $\text{Archidoris montereyensis}$ contain a diterpenoic acid glyceride 1 whose structure has been determined by x-ray diffraction analysis. The structure of a minor metabolite, the sesquiterpenoic acid glyceride 2, was determined by chemical correlation.     

Design and Application of a Set of Vitreous Standards for EDS-SEM Microanalysis of Melting Shop Slags

Non-metallic inclusions in steel are formed due to interactions between liquid steel and its environment in the melting shop (refractories and slags). Particles not trapped in the slag remain in the cast steel, impairing steel properties in service. Inclusion composition varies and certified standards covering the whole compositional range are unavailable.The present study describes the preparation of a set of homogeneous, glassy and crystalline standards with a wide compositional range for use in analysing non-metallic steel inclusions. For this, materials were designed based on knowledge of the compositional range of interest in the Al₂O₃–SiO₂–CaO–MgO–CaF₂ system, which is the matrix of the most frequent steel inclusions. The composition and microstructural homogeneity of the reference materials was verified.     

Rapid and flexible synthesis of 1-deoxy-D-xylulose-5-phosphate, the substrate for 1-deoxy-D-xylulose-5-phosphate reductoisomerase

1-Deoxy-D-xylulose-5-phosphate (DXP) is a key intermediate in the non-mevalonate pathway to terpenoids in bacteria, and it is the substrate for the enzyme 1-deoxy-D-xylulose-5-phosphate reductoisomerase (DXP-R). In order to study the mechanism of DXP-R, we required a flexible synthesis of the substrate which would allow the incorporation of isotopic labels, and the variation of the two stereocentres. Thus 1,4-dihydroxypent-2-yne was selectively reduced to give the E-olefin, and selective phosphorylation of the primary alcohol followed by oxidation of the secondary alcohol gave a substrate suitable for dihydroxylation. Dihydroxylation using stoichiometric OsO4 in the presence of chiral ligands gave protected DXP in high ee. Final hydrogenolysis gave DXP in quantitative yield and high purity. DXP-R was produced by rapid cloning of the dxr gene from Escherichia coli through controlled expression and ion exchange chromatography. The synthetic DXP was fully active in enzyme assays catalysed by recombinant DXP-R.     

Palladium-catalyzed cascade reaction of alpha,beta-unsaturated sulfones with aryl iodides

Unlike traditionally used acyclic 1,2-disubstituted alkenes, the reaction of alpha,beta-unsaturated phenyl sulfones with aryl iodides under Heck reaction conditions (Pd(OAc)(2) as catalyst, Ag(2)CO(3) as base in DMF at 120 (0)C) takes place mainly by a cascade process, involving one unit of the alkene and three units of the aryl iodide, to afford a substituted 9-phenylsulfonyl-9,10-dihydrophenanthrene. The dominant formation of this 3:1 coupling product, instead of the Heck trisubstituted olefin, shows that aromatic C-H bond activation processes can compete with the usually fast syn beta-hydrogen elimination step in the Heck arylation of an acyclic olefin. The structural scope of this palladium-catalyzed cascade arylation of alpha,beta-unsaturated sulfones has proved to be wide with regard to substitution at the beta-position (alkyl, aryl, or alkenyl substitution), substitution at the sulfone unit (alkyl or phenyl sulfones), and configuration at the CdoublebondC bond (trans or cis). Moreover, although less favored than in the case of the arylation of alpha,beta-unsaturated sulfones, similarly substituted 9,10-dihydrophenanthrenes have also been obtained in the case of alpha,beta-unsaturated phosphine oxides and alpha,beta-unsaturated phosphonate esters. A Pd(0)-Pd(II)-Pd(IV) mechanistic pathway involving the successive formation of highly electrophilic sigma-alkylpalladium intermediates and palladacycles is proposed for this multicomponent arylation.