Electrocapillary at contact: potential-dependent adhesion between a gold electrode and a mica surface

Using the electrochemical surface forces apparatus, we investigated adhesion (from pull-off measurements) between gold and mica as the potential of the gold surface was changed externally. Measurements were performed at different concentrations of KClO(4) in a potential window where the gold electrode is ideally polarizable. At applied potentials where the gold-mica interactions are repulsive, we obtain double layer forces that are predictable by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloid stability but deviate from the theory at short range. At applied potentials where the gold-mica interactions are attractive, we observed a very strong dependence of adhesion on the applied potential, a result that cannot be directly related to DLVO theory. We show, however, that an approach based on electrocapillary thermodynamics can be employed to model the potential dependence of adhesion seen in our measurements. This electrocapillary approach presents evidence of charging at the gold-mica interface and stresses the relation between the charge within and outside of the contact area.     

Poly(9,9'-spirobifluorene-manganese porphyrin): a new catalytic material for oxidation of alkenes by iodobenzene diacetate and iodosylbenzene

Anodic oxidation of tetraspirobifluorene-manganese porphyrin lead to the coating of the working electrode by insoluble electroactive poly(9,9'-spirobifluorene-manganese porphyrin) films for which electrochemical behaviour and physicochemical properties are described; these polymeric materials are able to catalyze the heterogeneous epoxidation of styrene with iodobenzene diacetate and iodosylbenzene.     

Mononuclear and dinuclear copper(I) complexes with a particularly bulky phosphine ligand. Unusual synthesis and crystal structure characterizations

Summary The addition of NPm (diphenylaminodiphenylphosphinomethane) to CuI or the addition of KI to (NPm)₂CuNO₃ leads to the same P-bonded Cu^I complex, (NPm)₂CuI, presenting a trigonal geometry around the Cu atom. The reaction of this new complex (or of its chloro analogue) with a Cu^II salt yields dinuclear species of general formula [(NPm)Cu(-X)₂Cu(NPm)] (X = Cl or I). X-ray analysis of these complexes show that they are isostructural and retain the trigonal geometry around the metal atom. The Cu···Cu distances are 2.775(1)Å for X = Cl and 2.642(1) Å for X = I. The Cu-(-X)-Cu angle is more acute for the iodide [61.48(3)°] than for the chloride [74.17(8)°] complex. These values are discussed in terms of Cu···Cu interactions induced by the electron donor ability of X and the bulk of the phosphine L.     

ANTHRALIN-DERIVED TRANSIENTS—II. FORMATION OF THE RADICAL BY SPONTANEOUS FRAGMENTATION OF BOTH SINGLET AND TRIPLET STATES OF THE 10,10''-DEHYDRODIMER: RADICAL PAIR MULTIPLICITY EFFECTS

The singlet and triplet states of the anthralin (1,8-dihydroxy-9-anthrone) dehydrodimer have been produced selectively in benzene via pulsed laser excitation and pulse radiolysis respectively. The lifetime of S1 is less than or equal to 30 ps, that of T1 short but unspecified. Both states fragment spontaneously to yield a pair of anthralin radicals. The singlet radical pair predominantly undergoes geminate recombination within the solvent cage. In contrast, the corresponding triplet radical pair undergoes essentially exclusive cage escape to give the anthralin free radical (lambda max 370, 490 and 720 nm) which recombines under normal diffusive conditions. Both recombination processes lead, at least in part, to one or more species which have been assigned as tautomeric forms of the original dimer. The anthralin free radical in benzene is insensitive to the vitamin E model 6-hydroxy-2,2,5,7,8-pentamethylchroman and reacts only slowly with oxygen.     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Phase coexistence in heterogeneous porous media: a new extension to Gibbs ensemble Monte Carlo simulation method

The effect of confinement on phase behavior of simple fluids is still an area of intensive research. In between experiment and theory, molecular simulation is a powerful tool to study the effect of confinement in realistic porous materials, containing some disorder. Previous simulation works aiming at establishing the phase diagram of a confined Lennard-Jones-type fluid, concentrated on simple pore geometries (slits or cylinders). The development of the Gibbs ensemble Monte Carlo technique by Panagiotopoulos [Mol. Phys. 61, 813 (1987)], greatly favored the study of such simple geometries for two reasons. First, the technique is very efficient to calculate the phase diagram, since each run (at a given temperature) converges directly to an equilibrium between a gaslike and a liquidlike phase. Second, due to volume exchange procedure between the two phases, at least one invariant direction of space is required for applicability of this method, which is the case for slits or cylinders. Generally, the introduction of some disorder in such simple pores breaks the initial invariance in one of the space directions and prevents to work in the Gibbs ensemble. The simulation techniques for such disordered systems are numerous (grand canonical Monte Carlo, molecular dynamics, histogram reweighting, N-P-T+test method, Gibbs-Duhem integration procedure, etc.). However, the Gibbs ensemble technique, which gives directly the coexistence between phases, was never generalized to such systems. In this work, we focus on two weakly disordered pores for which a modified Gibbs ensemble Monte Carlo technique can be applied. One of the pores is geometrically undulated, whereas the second is cylindrical but presents a chemical variation which gives rise to a modulation of the wall potential. In the first case almost no change in the phase diagram is observed, whereas in the second strong modifications are reported.     

Rigidified calixarenes bearing four carbamoylmethylphosphineoxide or carbamoylmethylphosphoryl functions at the wide rim

Conformationally rigidified tetraCMPO derivatives have been prepared from calix[4]arene bis(crown ether) 4a in which adjacent oxygens are bridged at the narrow rim by two diethylene glycol links. Acylation of the tetraamine 4c with the CMPO-active ester 5b gave the tetraphosphine oxide 6a, while the tetraphosphinate 6b and the tetraphosphonate 6c were obtained by Arbuzov reaction of tetrabromoacetamido derivative 7 with PhP(OEt)2 or P(OEt)3. The extraction ability of these CMPO derivatives was checked for selected lanthanides and actinides and compared with the analogous compounds 1b, 10b and 10d derived from calix[4]arene tetrapentyl ether. All rigidified bis(crown ether) ligands are more effective extractants than their pentyl ether counterparts and require only 1/10 of the concentration (cL= 10 4M) to obtain the same distribution coefficients, while with CMPO itself a 2,000-fold concentration is necessary. This could be a consequence of a better preorganisation of the ligating functions owing to the rigidity which on the other hand did not change the observed selectivity for americium (DAm/DEu=9-19) and for light lanthanides over heavy ones. NMR relaxivity titration curves show that the complex of Gd3+ with ligand 6a is highly oligomerised in anhydrous acetonitrile over a large range of ligand:metal concentration ratios. Nuclear magnetic relaxation dispersion (NMRD) profiles also showed that large oligomers were formed, and their mean tumbling times were deduced from the Solomon-Bloembergen-Morgan equations. The NMR spectra of dia- and paramagnetic lanthanide complexes with 6a agreed with the presence of two conformers with an elongated calix[4]arene skeleton in which the distances between opposite methylene groups are different. Contrary to what was observed with ligand 2a, the addition of nitrate ions does not labilize the metal complexes, presumably because of the rigidification effect of the ether bridges. Single-crystal X-ray structures were obtained for the active ester 5b and for diphenylphosphorylacetic acid 5a.     

Elucidating interactions of ionic liquids with polymer films using confocal Raman spectroscopy

We report on the molecular interactions between room-temperature ionic liquids (RTILs) and Nafion and PDMS membranes, proving that in contact with these polymers RTILs behave like electrolytes rather than solvents.     

Synthesis and structural characterization of new oxorhenium and oxotechnetium complexes with XN2S-tetradentate semi-rigid ligands (X = O, S, N)

Twelve novel oxo-technetium and oxo-rhenium complexes based on N2S2-, N2SO- or N3S-tetradentate semi-rigid ligands have been synthesised and studied herein. By reacting the ligands with a slight excess of suitable [MO]3+ precursor (ReOCl3(PPh3)2 or [NBu4][99gTcOCl4]), the monoanionic complexes of general formula [MO(Ph-XN2S)]- could be easily produced in high yield. The complexes have been characterized by means of IR, electrospray mass spectrometry, elemental analysis, NMR and conductimetry. The crystal structures of [PPh4][ReO(Ph-ON2S)] 1b and [NBu4][99gTcO(Ph-ON2S)] 1c have been established. The [MO]3+ moiety was coordinated via the two deprotonated amide nitrogens, the oxygen and the terminal sulfur atoms in 1b and 1c. In both compounds, the ON2S coordination set is in the equatorial plane, and the complexes adopted a distorted square-pyramidal geometry with an axial oxo-group. The chemical and structural identity of the different prototypic complexes (rhenium, 99gTc complexes and their corresponding 99mTc radiocomplexes) have been also established by a comparative HPLC study.