Fission fluctuation-dissipation dynamics of heavy nuclei has been studied using Langevin Monte Carlo simulations. The covariant form of the fission transport equation and the coefficients related to it are investigated. To learn about the influence of the dynamics from the ground state to the saddle point on the kinetic energy distributions we have studied various systems and compared the calculations both starting from the ground state and from the saddle point. Both the mean total kinetic energy of the fission fragments and its variances can fit with the experimental values in terms of a finite neck radius as scission condition.This work was supported by the National Natural Science Foundation of China. 相似文献
Electrocatalytic hydrogenation (ECH) is a burgeoning strategy for the sustainable utilization of hydrogen. However, how to effectively suppress the competitive hydrogen evolution reaction (HER) is a big challenge to ECH catalysis. In this study, amine (NH2 R)-coordinated Pd nanoparticles loaded on carbon felt (Pd@CF) as a catalyst is successfully synthesized by a one-step solvothermal reduction method using oleylamine as the reducing agent. An exceptional ECH reactivity on benzaldehyde is achieved on the optimal Pd@CF catalyst in terms of a high conversion (89.7%) and selectivity toward benzyl alcohol (89.8%) at −0.4 V in 60 min. Notably, the Faradaic efficiency for producing benzyl alcohol is up to 90.2%, much higher than that catalyzed by Pd@CF-without N-group (41.1%) and thecommercial Pd/C (20.9%). The excellent ECH performance of Pd@CF can be attributed to the enriched electrons on Pd surface resulted from the introduction of NH2 R groups, which strengthens both the adsorption of benzaldehyde and the adsorbed hydrogen (Hads) on Pd, preventing the combination of Hads to form H2, that is, inhibiting the HER. This study gives a new insight into design principles of highly efficient electrocatalysts for the hydrogenation of unsaturated aldehydes molecules. 相似文献
Liquid crystalline polymers (LCPs), especially liquid crystalline elastomers (LCEs) can generate ultrahigh shape change amplitude but has lower mechanical strength. Although some attempts have been tried to improve the mechanical performance of LCE, there are still limitations including complicated fabrication and high actuation temperature. Here, a versatile method is reported to fabricate light-driven actuator by covalently cross-linking polyurethane (PU) into LCP networks (PULCN). This new scheme is distinct from the previous interpenetrating network strategy, the hydrogen bonds and covalent bonds are used in this study to improve the miscibility of non-liquid-crystalline PU and LCP materials and enhance the stability of the composite system. This material not only possesses the shape memory properties of PU but shows shape-changing behavior of LCPs. With a shrinkage ratio of 20% at the phase transition temperature, the prepared materials reached a maximum mechanical strength of 20 MPa, higher than conventional LCP. Meanwhile, the resulting film shows diverse and programmable initial shapes by constructing crosslinking density gradient across the thickness of the film. By integration of PULCN with near-infrared light-responsive polydopamine, local and sequential light control is achieved. This study may provide a new route for the fabrication of programmable and mechanically robust light-driven soft actuator. 相似文献
Li-rich layered oxides (LLOs) have been considered as the most promising cathode materials for achieving high energy density Li-ion batteries. However, they suffer from continuous voltage decay during cycling, which seriously shortens the lifespan of the battery in practical applications. This review comprehensively elaborates and summarizes the state-of-the-art of the research in this field. It is started from the proposed mechanism of voltage decay that refers to the phase transition, microscopic defects, and oxygen redox or release. Furthermore, several strategies to mitigate the voltage decay of LLOs from different scales, such as surface modification, elemental doping, regulation of components, control of defect, and morphology design are summarized. Finally, a systematic outlook on the real root of voltage decay is provided, and more importantly, a potential solution to voltage recovery from electrochemistry. Based on this progress, some effective strategies with multiple scales will be feasible to create the conditions for their commercialization in the future. 相似文献
Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm−2), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics. 相似文献
Ionic conductive soft materials for mimicking human skin are a promising topic since they can be thought of as a possible basis for biomimetic sensing. In pursuit of devices with a long working range and low signal delay, conductive materials with low hysteresis and good stretchability are highly demanded. To overcome the challenges of highly stretchable conductive materials with good resilience, herein a chemical design is proposed where polyrotaxanes act as topological cross-linkers to enhance the stretchability by sliding-induced reduced stress concentration while the compatible ionic liquid is introduced as a dispersant for low hysteresis. The obtained ionogels exhibit versatile properties more than low hysteresis (residual strain = 7%) and good stretchability (550%), and also anti-fatigue, biocompatibility, and good adhesion. The low hysteresis is attributed to lower energy dissipation from the well-dispersed polyrotaxanes by compatible ionic liquids. The mechanism provides a new insight in fabricating highly stretchable and low-hysteresis slide-ring materials. Furthermore, the conductivity of the ionogels and their responses to strains and temperatures are measured. Benefiting from the good conductivity and low hysteresis, the ionogel is applied to develop a wireless communication system to realize rapid human-machine interactions. 相似文献
In the field of flexible light-emitting display, goal-oriented intelligent molecular design is used to control various behaviors of molecules, which provides potential for the development of flexible light-emitting conjugated polymers (LCPs). The introduction of non-conjugated units into polymer molecules is a key prerequisite for realizing the intrinsic flexibility, but its easy interchain slip will also lead to the formation of interchain excited states, which is detrimental to the efficiency of light-emitting diodes. Herein, two kinds of fluorene-based rod-coil copolymer with stable deep blue emission characteristics is presented and with Commission Internationale de L'Eclairage (CIE) coordinates of (0.18, 0.14) and (0.15, 0.09), respectively. Surprisingly, the copolymer films show efficient blue emission even at 100% tension. Meanwhile, the rod-coil copolymer possesses better aging resistance compared to rigid π-conjugated counterparts. Finally, both rigid and flexible light-emitting diodes based on rod-coil copolymer exhibit stable deep blue emission, and the G2-based PLED with CIE coordinates of (0.16, 0.08), which approach National Television System Committee standard blue specification. These results confirm the validity of rod-coil copolymer design strategy in constructing inherently flexible polymers with deep blue emission, which have great application potential in flexible PLEDs. 相似文献
Maximizing network lifetime is the main goal of designing a wireless sensor network. Clustering and routing can effectively balance network energy consumption and prolong network lifetime. This paper presents a novel cluster-based routing protocol called EECRAIFA. In order to select the optimal cluster heads, Self-Organizing Map neural network is used to perform preliminary clustering on the network nodes, and then the relative reasonable level of the cluster, the cluster head energy, the average distance within the cluster and other factors are introduced into the firefly algorithm (FA) to optimize the network clustering. In addition, the concept of decision domain is introduced into the FA to further disperse cluster heads and form reasonable clusters. In the inter-cluster routing stage, the inter-cluster routing is established by an improved ant colony optimization (ACO). Considering factors such as the angle, distance and energy of the node, the heuristic function is improved to make the selection of the next hop more targeted. In addition, the coefficient of variation in statistics is introduced into the process of updating pheromones, and the path is optimized by combining energy and distance. In order to further improve the network throughput, a polling control mechanism based on busy/idle nodes is introduced during the intra-cluster communication phase. The simulation experiment results prove that under different application scenarios, EECRAIFA can effectively balance the network energy consumption, extend the network lifetime, and improve network throughput.