SOI光波导和集成波导光开关矩阵

报道了基于SOI (silicon-on-insulator）材料的光波导和集成波导光开关矩阵的最新研究进展. 给出了截面为梯形的脊波导的单模条件，设计制备了MMI (multimode interference）集成耦合器和基于Mach-Zehnder光波导干涉仪的热光型2×2光开关，开关转换速度达到了5～8μs，驱动功耗仅为140mW，是当前国际上同类型光开关中转换速度最快的. 在此基础上制备成功了4×4波导光开关矩阵，并实现了光信号在不同信道间的转换.     

Block-Orthogonal Frequency Division Multiplexing in Multi-Path Fading Channel

Orthogonal frequency division multiplexing (OFDM) is robust against multi-path interference due to using a lot of low symbol rate sub-carriers. In order to mitigate the degradation due to multi-path interference, guard time interval (GI) is inserted into each OFDM symbol. However, redundant allocation to GI leads to loss of effective transmission power. We propose the Block-OFDM which can reduce the GI overhead ratio per frame compared with conventional OFDM. In Block-OFDM system frequency domain equalization (FDE) is carried out in order to remove multi-path interference. We evaluated Block-OFDM performance in a frequency selective fading channel and compared with that of conventional OFDM. Ryohei Kimura received his B.E. and M.S degrees in communications engineering form Tohoku University, Sendai, Japan, in 2001 and 2003, respectively. In 2003, he joined Panasonic Mobile Communications Co., Ltd. His current research interests include such mobile communication technologies as OFDM and MIMO (MLD), and the like. Akiyoshi Monma received his B.E. in communications engineering form Tohoku University, Sendai, Japan, in 1998. In 1998, he joined Panasonic Mobile Communications Sendai R&D Lab. Co., Ltd. His current research interests include such mobile communication technologies as OFDM and PAPR reduction, and the like. Jinsong Duan received his B.E. and M.S. from Changsha Institute of Technology, China in 1987 and 1990. He received his Ph.D. from Osaka City University, Japan in 2000. From 2000–2003 he was with Mitsubishi Electric Corporation, where he engaged in research and development of WCDMA systems. From 2003, he joined Panasonic Mobile Communications Co., Ltd. His current interests include such mobile communication technologies as OFDM, MIMO, link adaptation, scheduling, and TDMA/FDMA/CDMA systems. Mitsuru Uesugi received his B.E. degree from Waseda University in 1986 and received his Ph.D degree from Tohoku University in 2004, respectively. He is a general manager in the Mobile Communication Technology Development Center of Panasonic Mobile Communications Co., Ltd. His current research interests include such mobile communication technologies as equalization, interference cancellation, modulation method, and the like.     

Fabrication of Alq3／PBD OMQW Structures and Its Photoluminescence Characteristics

Organic multiple quantum well(OMQW)structures consisting of alternating layers of tris(8-quinolinolato)aluminum(Ⅲ）（Alq3)an 2-(4-biphenylyl)-5-(4-ter-butylphenyl)-(1,3,3-oxadiazole)(PBD)have been fabricated by organic molecular beam deposition(OMBD).The individual layer thickness in the multilayer samples was varied from 6 nm tp 20nm.The multiple quantum well structures were determined by low angle X-ray diffraction,optical absorption and photoluminescence(PL).The PL spectra narrow and the emission energy has been observed to shift to higher energy compared with that in the monolayer structure,suggesting a quantum size effect.     

Individual Surface‐Engineered Microorganisms as Robust Pickering Interfacial Biocatalysts for Resistance‐Minimized Phase‐Transfer Bioconversion

A powerful strategy for long‐term and diffusional‐resistance‐minimized whole‐cell biocatalysis in biphasic systems is reported where individually encapsulated bacteria are employed as robust and recyclable Pickering interfacial biocatalysts. By individually immobilizing bacterial cells and optimizing the hydrophobic/hydrophilic balance of the encapsulating magnetic mineral shells, the encased bacteria became interfacially active and locate at the Pickering emulsion interfaces, leading to dramatically enhanced bioconversion performances by minimizing internal and external diffusional resistances. Moreover, in situ product separation and biocatalyst recovery was readily achieved using a remote magnetic field. Importantly, the mineral shell effectively protected the entire cell from long‐term organic‐solvent stress, as shown by the reusability of the biocatalysts for up to 30 cycles, while retaining high stereoselective catalytic activities, cell viabilities, and proliferative abilities.     

Highly stable and reusable imprinted artificial antibody used for in situ detection and disinfection of pathogens

Sandwich ELISA methods have been widely used for biomarker and pathogen detection because of their high specificity and sensitivity. However, the main drawbacks of this assay are the cost, the time-consuming procedure for the isolation of antibodies and their poor stability. To overcome these restrictions, we herein fabricated artificial antibodies based on imprinting technology and developed a sandwich ELISA for pathogen detection. Both the capture and detection antibodies were obtained via an in situ method, with simplicity, rapidity and low cost. The peroxidase mimics, the CeO₂ nanoparticles, as signal generators were integrated with the detection antibody. The fabricated artificial antibodies exhibited not only natural antibody-like binding affinities and selectivities, but also superior stability and reusability. The detection limit was about 500 CFU mL^–1, which is much lower than that of traditional ELISA methods (10⁴ to 10⁵ CFU mL^–1). Furthermore, the capture antibody can disinfect pathogens in situ.     

Enzyme-regulated the changes of pH values for assembling a colorimetric and multistage interconnection logic network with multiple readouts

Based on enzymatic reactions-triggered changes of pH values and biocomputing, a novel and multistage interconnection biological network with multiple easy-detectable signal outputs has been developed. Compared with traditional chemical computing, the enzyme-based biological system could overcome the interference between reactions or the incompatibility of individual computing gates and offer a unique opportunity to assemble multicomponent/multifunctional logic circuitries. Our system included four enzyme inputs: β-galactosidase (β-gal), glucose oxidase (GOx), esterase (Est) and urease (Ur). With the assistance of two signal transducers (gold nanoparticles and acid–base indicators) or pH meter, the outputs of the biological network could be conveniently read by the naked eyes. In contrast to current methods, the approach present here could realize cost-effective, label-free and colorimetric logic operations without complicated instrument. By designing a series of Boolean logic operations, we could logically make judgment of the compositions of the samples on the basis of visual output signals. Our work offered a promising paradigm for future biological computing technology and might be highly useful in future intelligent diagnostics, prodrug activation, smart drug delivery, process control, and electronic applications.     

三维间断位移法及强奇异和超奇异积分的处理方法

从积分方程Somigliana等式出发,导出三维状态下单位位错集度的基本解.在此基础上,建立了边界积分方程,并给出了其离散形式.对强奇异和超奇异积分,采用了Hadamard定义的有限部分积分来处理.最后,给出了计算裂纹应力强度因子的算例,并与解析解进行了比较,证实了该方法的有效性.     

光纤传感器对机敏复合材料结构性能的影响

本文通过实验研究了光纤传感器对埋光纤机敏复合材料机械性能的影响，详细分析了埋光纤机敏复合材料层板在外载作用下的应力分布，针对三种不同铺层方式，研究了六种树脂填充区对机敏复合材料层板应力集中的影响，得出了减小应力集中的有效方案。     

Ionic liquids as precursors for highly luminescent,surface-different nitrogen-doped carbon dots used for label-free detection of Cu/Fe and cell imaging

Carbon nanodots (C-Dots) have attracted much attention in recent years due to their low cost, ready scalability, excellent chemical stability, biocompatibility and multicolor luminescence. Here, we report a facile strategy for producing highly luminescent, surface-different nitrogen-doped carbon dots (C-Dots) by using different ionic liquids (ILs). Intriguingly, the surface-different C-Dots show different selectivity for Cu²⁺ and Fe³⁺. To the best of our knowledge, this is the first example which shows that ILs are excellent precursors for producing luminescent nanomaterial used for detection of different metal ions. The resultant nitrogen-doped C-Dots are highly photoluminescent and can be used for multicolor bioimaging. Most notable, by taking different ILs as precursors, we obtain surface-different C-Dots, which can be directly used for selective detection of Cu²⁺ and Fe³⁺ without any modification. These C-Dots based sensors exhibit high sensitivity and selectivity and the sensing process can be easily accomplished with one-step rapid operation. More importantly, compared with other method using QDs, organic dyes and organic solvent, this strategy is much more eco-friendly. This work may offer a new approach for developing low cost and sensitive C-Dots-based sensors for biological and environmental applications.     

基于数字微镜的无掩模数字光刻系统的研制

研究了一种基于数字微镜的无掩模光刻系统.利用数字微镜输出的高精度数字掩模,结合高质量的高倍精缩投影光学系统,理论上完全可实现亚微米级衍射微光学元件的制作.该文从照明系统、数字微镜芯片、精缩物镜设计等方面进行了系统总体设计.利用该系统成功制作了5×5达曼光栅、8台阶闪耀光栅和8台阶菲涅耳透镜,进一步论证了该系统的可行性.